Abstract:The rheology of a partially hydrolyzed polyacrylamide (HPAM) solution plays an important role in its oil recovery during polymer flooding. However, multiple factors in brine, such as sulfide ions, cause a dramatic loss in the viscosity and oil recovery. To better understand the sulfide-induced viscosity loss and the consequent flow mechanisms in pore networks, the morphology of polymer solutions with and without sulfide ion was observed by scanning electron microscopy; and the variations of the pore scale flow fields were demonstrated by a microscopic visualization seepage experiment combined with Micro-PIV (Microscale Particle Image Velocimetry). The results showed that, with the presence of sulfide ion, the microstructure of the polymer changed from a uniform three-dimensional network structure to loose and uneven floccules, which resulted in viscosity loss (over 70% with 5-mg/L sulfide ion). Moreover, higher concentrations of sulfide ions (5 mg/L and 10 mg/L) resulted in earlier shear thinning characteristics than those with lower sulfide concentrations. Due to viscosity loss, the average flow velocity in the main stream of the microscopic seepage experiment increased more significantly than that without sulfide. However, the viscosity loss alone cannot independently explain the severe viscous fingering during the subsequent post-water flooding, which was about five times greater than that of the primary water flooding in terms of the velocity ratio between the mainstream and margin. A further pore-scale flow field analysis exhibited an eccentric and a bimodal velocity distribution in the throat along the radial and axial directions, respectively. The former distribution indicated that the adsorbed polymer on the pore wall was broken through by hydraulic shear due to the collapsed structure caused by sulfide ion. The latter suggested that another sulfide-induced impact was an earlier-occurring non-Newtonian characteristic with a low shear rate. Therefore, instead of viscosity loss, elastic loss is the dominant mechanism affecting the characteristics of the aggregate flow field under the action of sulfide. Microscopic flooding combined with Micro-PIV is a feasible and essential method to reveal pore scale flow mechanisms.

Decrease in Viscosity of Partially Hydrolyzed Polyacrylamide Solution Caused by the Interaction Between Sulfide Ion and Amide Group

The recovery of viscosity of HPAM solution in presence of high concentration sulfide ions

JIN Zhiyuan1,2, SHAN Guorong2,3, PAN Pengju2,3

Synergetic Effect of a Reactive Compatibilizer and Organo-montmorillonite on the Dispersion of Polyamide 6 /Polydimethylsilicone Blend with a High Viscosity Ratio

Pore-Scale Flow Fields of the Viscosity-Lost Partially Hydrolyzed Polyacrylamide Solution Caused by Sulfide Ion

Study on Synergistic Effect Between Wormlike Micelles and Hydrophobically Modified Poly(Acrylic Acid) in Salt Solution

Synergism Between Hydrophobically Modified Polyacrylic Acid and Wormlike Micelles

Effect of silicon dioxide nanoparticles on the rheology properties of fresh and mechanically degraded hydrolyzed polyacrylamide polymer solutions

Rheological properties and enhanced oil recovery performance of a novel sulfonate polyacrylamide

Interaction between HPAM and urea in aqueous solution and rheological properties

Degradation of Polyacrylamide (PAM) in Aqueous Solution by Electron Beam Technology: Efficiency, Viscosity Reduction and Correlation with Microstructure of Polymer Molecules

Molecular Dynamics Study on the Effect of Polyacrylamide on Electric Field Demulsification of Oil-in-Water Emulsion

Prevention of network destruction of partially hydrolyzed polyacrylamide (HPAM): Effects of salt, temperature, and fumed silica nanoparticles

Effect of degree of hydrolysis of polyacrylamide on the micromorphology of its solution

Shear Resistance Properties of Modified Nano-SiO2/AA/AM Copolymer Oil Displacement Agent

Incorporation of Partially Hydrolyzed Polyacrylamide With Zwitterionic Units and Poly(Ethylene Glycol) Units Toward Enhanced Tolerances to High Salinity and High Temperature

Investigation of a hydrophobically associating polymer’s temperature and salt resistance for fracturing fluid thickener

Treatment of Polyacrylamide-Containing Wastewater by Ionizing Radiation: Efficient Reduction of Viscosity and Degradation of Polyacrylamide

Low Cationic Proportion Ampholytic Polymer: Synthesis, Solution Properties and Interaction with Anionic Surfactant

Rheology of fumed silica nanoparticles/partially hydrolyzed polyacrylamide aqueous solutions under small and large amplitude oscillatory shear deformations

Role of the Polymer in the Emulsion Stability of an Amphoteric Polyacrylamide in Different Flooding Systems