Abstract:The effect of cold rolling and annealing on texture development and mechanical behavior of Zircaloy-4 alloy plates was systematically investigated in the present work. The as-received plates were subjected to cold rolling with thickness reductions of 33% and 66%. Electron back-scatter diffraction and tensile tests were performed to reveal the texture and mechanical properties, respectively. Results showed that a bimodal texture was featured in the as-received plate and the texture was a fiber that spread from <<math>101¯0</math>> to <<math>112¯0</math>>. After cold rolling and annealing, a fiber with a continuous distribution from <<math>101¯0</math>> to <<math>112¯0</math>> and a fiber with a maximum at the <<math>112¯0</math>> position were present in the plates with thickness reductions of 33% and 66%. Besides, the existence of {<math>0001</math>} basal fiber was noticed, indicating more basal poles oriented toward the normal direction. Tensile tests showed that the recrystallized plate with 66% thickness reduction was more ductile and less strong than that with 33% reduction. Meanwhile, tensile properties were sensitive to strain rate, loading direction and thickness reduction. Moreover, the relationship between texture development and yield strength was discussed based on Schmid theory. Calculated results indicated that prismatic <a> slip was the predominant deformation mode and its Schmid factor values under different loading directions contributed to the anisotropy of yield strength. Due to the texture development during cold rolling and annealing, the averaged SF values for prismatic <a> slip changed with the increased thickness reduction, resulting in the variation of yield strength.</a></a>

On the Strength-Hardness Relationships in a Zr-Nb Alloy Plate with Bimodal Basal Texture Microstructure

Microstructure‐Property Relations in the Tensile Behavior of Bimodal Nanostructured Metals

Texture development and mechanical behavior of Zircaloy-4 alloy plates fabricated by cold rolling and annealing

Study of cold deformation and low temperature annealing textures in Zr-Nb alloy sheet

Effects of Bimodal Basal Texture on Bending Stress and Microstructure Evolution of Mg-2.6Nd-0.55Zn-0.5Zr Alloys

Molecular dynamics simulation of gradient alloying distribution on the nano-mechanical properties of Nb-Zr alloys

Investigation on Microstructural Evolution and Hardening Mechanism in Dilute Zr–Nb Binary Alloys

Excellent Work-Hardening in ZrCu/NiNb Amorphous/amorphous Nanolaminates

Revealing the evolution mechanisms of microstructure, texture and mechanical behavior in Zr702 alloy plates fabricated by accumulative roll bonding

Anisotropy in Fracture Toughness and Toughening Mechanism of Ti-22Al-25Nb Alloy Related to Texture and Grain Boundary Damage

Enhanced ductility and strength of Mg-1Zn-1Sn-0.3Y-0.2Ca alloy achieved by novel micro-texture design

Texture Evolution and Temperature-Dependent Deformation Modes in Ambient- and Cryogenic-Rolled Nanolayered Zr-2.5Nb

The Plasticity, Crystallization and Micro-Hardness of Zr–Co–Al-(Nb) BMGs Upon Rapid Quenching and Conventional Annealing

Insights into the evolution of texture and mechanical properties during warm rolling and annealing of Mg–2Zn-0.5Ca alloy

Investigation on deformation mechanisms of Zr-1Sn-0.3Nb-0.3Fe-0.1Cr alloy using in situ EBSD/SEM

Strengthening Behaviors and Strength Differential Effect of Nano-Zrb2-particle/aa6xxx Alloy Composites

Static mechanical characterization of a bulk amorphous and nanocrystalline Zr40Ti14Ni11Cu10Be25 alloy

High Strength and Ductility in Multimodal-Structured Zr

Mechanical Performance of ZrO2-Ni Functionally Graded Material by Powder Metallurgy

Microstructure and Nanomechanical Behavior of Individual Phase in Β-Solidifying Ti-43Al-5Nb-3.5Cr-1Zr Alloy

Length scale dependent plasticity of amorphous/amorphous NiNb/ZrCuNiALSI nanolaminates