Abstract:Sorption enhanced steam gasification of biomass (SESGB) presents a promising approach for producing high-purity H2 with potential for zero or negative carbon emissions. This study investigated the effects of gasification temperature, CaO to carbon in biomass molar ratio [CaO/C], and steam flow on the SESGB process, employing carbide slag (CS) and its modifications, CSSi2 (mass ratio of CS to SiO2 is 98:2) and CSCG5 (mass ratio of CS to coal gangue (CG) is 95:5), as CaO-based sorbents. The investigation included non-isothermal and isothermal gasification experiments and kinetic analyses using corn cob (CC) in a macro-weight thermogravimetric setup, alongside a fixed-bed pyrolysis-gasification system to assess operational parameter effects on gas product. The results suggested that CO2 capture by CaO reduced the mass loss during the main gasification as the [CaO/C] increased. The appropriate temperature for SESGB process should be selected between 550 and 700 °C at atmospheric pressure. The appropriate amount of sorbent or steam could facilitate the gasification reaction, but excessive addition led to adverse effects. Operational parameters influenced the apparent activation energy (Ea) by affecting various gasification reactions. For each test, Ea at the char gasification stage was significantly higher than that at the rapid pyrolysis stage. The addition of CS notably increased H2 concentration and yield, while sharply reducing CO2 levels. H2 concentration initially rose and then fell with greater steam flow, peaking at 76.11 vol% for a steam flow of 1.0 g/min. H2 yield peaked at 298 mL/g biomass with a steam flow of 1.5 g/min, a gasification temperature of 600 °C and a [CaO/C] of 1.0. Increasing gasification temperature remarkably boosted the H2 and CO2 yields. Optimal conditions for the SESGB using CS as a sorbent, determined via response surface methodology (RSM), include a gasification temperature of 666 °C, a [CaO/C] of 1.99, and a steam flow of 0.5 g/min, under which H2 and CO2 yields were 464 and 48 mL/g biomass, respectively. CSSi2 and CSCG5 demonstrated excellent cyclic H2 production stability, maintaining H2 yields around 440 mL/g biomass and low CO2 yields (∼60 mL/g biomass) across five cycles. The study results offer new insights for the high-value utilization of agroforestry biomass and the reduction and resource utilization of industrial waste.

Genetic Algorithms and Neural Networks in Optimization of Sorbent Enhanced H2 Production in FB and CFB Gasifiers

Modelling and Optimization of Sorption-Enhanced Biomass Chemical Looping Gasification Coupling with Hydrogen Generation System Based on Neural Network and Genetic Algorithm

Modelling of Biomass Gasification Through Quasi-Equilibrium Process Simulation and Artificial Neural Networks

A Conceptual Framework for Biomass Gasifier Design Using a Semi-Empirical Model and Heuristic Algorithm

Fluidized-bed gasification kinetics model development using genetic algorithm for biomass, coal, municipal plastic waste, and their blends

Integrated process for simulation of gasification and chemical looping hydrogen production using Artificial Neural Network and machine learning validation

Elucidating the effect of process parameters on the production of hydrogen-rich syngas by biomass and coal Co-gasification techniques: A multi-criteria modeling approach

Hydrogen Production Via Cao Sorption Enhanced Anaerobic Gasification of Sawdust in A Bubbling Fluidized Bed

Integrated neural network and aspen plus model for entrained flow gasification kinetics investigation

Multi-objective genetic algorithm approach for enhanced cumulative hydrogen and methane-rich syngas emission through co-pyrolysis of de-oiled microalgae and coal blending

Performance analysis of waste biomass gasification and renewable hydrogen production by neural network algorithm

Artificial neural network model of co-gasification of petroleum coke with coal or biomass in bubbling fluidized bed

Simulation of sorption enhanced staged gasification of biomass for hydrogen production in the presence of calcium oxide

Advancing hydrogen generation: Kinetic insights and process refinement for sorption-enhanced steam gasification of biomass utilizing waste carbide slag

Modeling, Prediction And Multi-Objective Optimization Of The Coal Gasification System

Hydrogen production via integrated configuration of steam gasification process of biomass and water‐gas shift reaction: Process simulation and optimization

Hydrogen production from co-gasification of Çan lignite and sorghum biomass in a fixed-bed gasifier: CFD modeling

Optimizing Hydrogen-Rich Biofuel Production: Syngas Generation from Wood Chips and Corn Cobs

Prediction of syngas properties of biomass steam gasification in fluidized bed based on machine learning method

Optimizing H 2 production from biomass: A machine learning-enhanced model of supercritical water gasification dynamics

Modeling Of Biomass Gasification To Syngas