Abstract:Composite insulators are prone to accelerated aging in coastal and industrially polluted environments, leading to flashovers, power grid outages, and economic losses. Traditional detection methods either require power grid shutdown or lack adequate evaluation capabilities. This research introduces a pixel-level assessment of the aging status of composite insulators using hyperspectral imaging (HSI) technology. And proposed a least squares support vector machine (LSSVM) based on Improved Beluga Whale Optimization (IBWO) algorithm to evaluate the aged levels of composite insulators. First, artificial accelerated aged samples are categorized into aging levels I-VI using the static contact angle. Hyperspectral data in the 400 nm–1040 nm wavelength range are acquired using a HSI device, followed by preprocessing steps involving denoising and dimensionality reduction. Subsequently, the IBWO algorithm is employed to identify the optimal parameters (C, σ) for LSSVM. The performance of IBWO was compared with other optimization algorithms on test functions, demonstrating that IBWO exhibits the optimal convergence speed and optimization accuracy, effectively enhancing the classification and generalization ability of LSSVM. In this study, the proposed method was compared with other algorithms using k-fold cross validation, resulting in overall accuracy of 96.83% and demonstrating its superior classification capability. The presented method enables pixel-level assessment of the aging degree and visualizes the distribution of aging states in composite insulators. It provides valuable guidance for studying the aging characteristics and structural design in diverse complex environments, holding significant potential for noncontact evaluation of other electrical equipment.

Nuclear Magnetic Resonance Detection Method for Aging State of Composite Insulators

Review in Application of High Voltage Composite Insulator and Its Ageing State

Assessing the Aging Status of the Silicone Rubber Insulator Using Unilateral Nmr Technology

Portable Non-Destructive Magnetic Resonance Sensor for Assessing the Aging Status of Silicon Rubber Insulators

Optimized Unilateral Magnetic Resonance Sensor with Constant Gradient and Its Applications in Composite Insulators

Optimized Portable Unilateral Magnetic Resonance Sensor for Assessing the Aging Status of Silicon Rubber Insulators

Carbon Nanotube/polymer Nanocomposites: Sensing the Thermal Aging Conditions of Electrical Insulation Components

Defect Identification of Composite Insulator Based on Infrared Image

A New Noncontact Detection Method for Assessing the Aging State of Composite Insulators

Aging Evaluation of Composite Insulator with Laser-induced Breakdown Spectroscopy

The Degradation Assessment of Epoxy/mica Insulation under Multi-Stresses Aging

Artificial Aging Tests with Defective Composite Insulators

Microwave-based Non-destructive Testing Method on Composite Insulators

Real time nondestructive aging sensors for cables

Composite Insulator Interface Discharge Accelerated Decay-Like Aging and Analysis

Diagnosis Method of Decay-like Composite Insulators in a High-Humidity Environment Based on Characteristic Coefficient of Temperature Rise Gradient

Dielectric loss and extended voltage response measurements for low-voltage power cables used in nuclear power plant: potential methods for aging detection due to thermal stress

Analysis of a Fractured 500 Kv Composite Insulator - Identification of Aging Mechanisms and Their Causes

Non-Destructive Testing of Internal Defects in Composite Insulators Using Microwave Technique

Finite Element Simulation Analysis of Infrared Thermal Wave Detection on Composite Insulators

The change of microstructure of epoxy mica insulation in multi-stress aging