Abstract:The superior fracture toughness of yttria stabilized tetragonal zirconia polycrystals (TZPs) originates from the stress-induced tetragonal to monoclinic (t-m) phase transformation in the tensile stress field around a propagating crack front. However, spontaneous phase transformation can take place when TZPs are exposed to humid environments, which is accompanied by intergranular microcracking and results in the loss of mechanical properties. This phenomenon, usually called low temperature degradation (LTD) or aging, is considered as a main drawback of TZPs for their clinical applications such as femoral heads and dental implants. In order to explore the mechanisms behind transformation induced intergranular microcracking, a coupled phase field model is developed in this paper, which can simulate the t-m phase transformation and intergranular microcracking simultaneously. The phase field model is validated by studying the microcrack nucleation from a single twin variant with a pure shear eigenstrain. The length of the nucleated microcrack obtained with the phase field modelling matches well with the theoretical prediction. The influence of the dilatational eigenstrain on microcrack nucleation and microcrack nucleation from a monoclinic twin are fully discussed. After that, phase field simulations are conducted to study t-m transformation induced intergranular microcracking in polycrystalline tetragonal zirconia ceramics. It is found that the width of the martensitic variants and their incidence angles to the grain boundary have significant influences on microcrack nucleation. The microstructure of the martensitic twins and the distribution of the intergranular microcracks are fully discussed. The results are helpful to understand the degradation mechanisms of TZPs after the hydrothermal aging.

Study of Transformation Toughening Behavior of an Edge Through Crack in Zirconia Ceramics with the Cohesive Zone Model

Transformation Toughening of Al2O3/ZrO2 Laminated Ceramics with Residual Compressive Stress

Study of the Fracture Behavior of Tetragonal Zirconia Polycrystal with a Modified Phase Field Model

Ceramics toughening mechanism study of mixed-mode I-III cracks with a new yield criterion

Study of crack propagation behavior in single crystalline tetragonal zirconia with the phase field method

Crack Propagation Path Selection and Plastic Deformation at a Crack Tip in Zirconium

Relationship between Surface Compressive Stresses and Transformation Toughening of ZrO2 Laminated Ceramics

Mechanical Properties and Constitutive Model of Toughening Ceramics

Transformation Driving Force for Indentation Cracking in Zirconia Ceramics

CRACK PROPAGATION IN POLYCRYSTALLINE ELASTIC-VISCOPLASTIC MATERIALS USING COHESIVE ZONE MODELS

Phase transformation and incompatibility at grain boundaries in zirconia-based shape memory ceramics: a micromechanics-based simulation study

Toughening Analysis of Mixed Cracks in Transformation Toughened Ceramics on Influence of Sd Effect

Fracture Toughness Enhancement Due to Particle Transformation

Computer simulation of R-curve behaviour in ZrO2-Y2O3 ceramics

Study of Transformation Induced Intergranular Microcracking in Tetragonal Zirconia Polycrystals with the Phase Field Method

A 3D Cohesive Element Model for Fracture Behavior Analysis of Ceramic Tool Materials Microstructure

Transformation toughening in ceramic with martensites or micro-cracks

The Stiffness and Strength of Transformation Toughening Ceramics with Misoriented Microcracks

Simulation of crack propagation in composite materials using cohesive zone model and image-based numerical model

Fracture simulation for zirconia toughened alumina microstructure

Modelling of combine toughening in whiskers and transformation combine toughening ceramics