Abstract:In the field of non-destructive evaluation (NDE) of solid metal materials, it has been a challenge to detect surface and internal defects simultaneously by using a single physical mechanism technique. Conventionally, different testing techniques, in which each one is particularly sensitive to a certain type of defect, are employed to gain full defect information. However, a separated testing method is always a time-consuming and laborious work. Here, we report a magnetoelectric-ultrasonic hybrid transducer and multimodal system for quantitative NDE of metal, which integrates a magnetoelectric composite wrapped with a coil for generating alternating current field and simultaneously measuring magnetic abnormal of surface defects (referred to as ME-ACFM) and a dual-piezoceramic ultrasonic transducer (DP-UT) for generating acoustic pulses and detecting the echo signal of internal defects, respectively. A bipulse signal with different pulse widths is used for excitation of the hybrid transducer, in which one is corresponded to the resonant frequencies of 5 MHz for DP-UT, and another to 122 kHz for ME-ACFM. The huge difference between two resonant frequencies is helpful for restraining signal interference each other. Experimental investigations show that when scanning the tested specimens (standard steel No.45 and aluminum plates), the surface and internal defects information can be obtained simultaneously almost without a dead zone. The surface defect resolutions of 0.1 mm width and 0.1 mm depth, and the inside defect resolution of 2 mm blind hole are obtained; the experimental errors for surface defect (crack) depth up to 5 mm are around 5 %; while experimental errors for ultrasonic depth measurement (with a blind zone of 1.25 mm) is less than 0.63 mm. The proposed hybrid transducer and multimodal system open up a new way for designing multi-physical mechanism based NDEs.

Internal Defect Detection in Ferromagnetic Material Equipment Based on Low-Frequency Electromagnetic Technique in 20# Steel Plate

Signal difference-based nondestructive low-frequency electromagnetic testing for ferromagnetic material pipe equipment

Nondestructive Testing Method for Internal Defects in Ferromagnetic Materials under Weak Bias Magnetization

Phase-Extraction-Based MFL Testing for Subsurface Defect in Ferromagnetic Steel Plate

Nondestructive Testing for Shallow Defect of Ferromagnetic Objects Based on Magnetic Probe Structure

Local Defect Detection of Ferromagnetic Metal Casing Based on Pulsed Eddy Current Testing

Physical coupling fusion sensing of MFL-EMAT for synchronous surface and internal defects inspection

Defect localization method for ferromagnetic pipes based on stepped magnetization in magnetic permeability perturbation testing

Multiphysics Structured Eddy Current and Thermography Defects Diagnostics System in Moving Mode.

Ferromagnetic Tubes Testing Based Pulsed Remote Field Eddy Current Technique

Novel interventional electromagnetic thermography for subsurface defect detection

Internal Defect Detection of Multilayer Dissimilar Metal Based on Pulse Eddy Current

Magnetic Field Detecting Method of Cracks in Aluminum and Copper Plates

Multifrequency AC Magnetic Flux Leakage Testing for the Detection of Surface and Backside Defects in Thick Steel Plates

Magneto-acoustic Fusion Sensing for Surface and Subsurface Defect Differentiation in the Ferromagnetic Material

Research on the Fusion Mechanism of Pulsed Electromagnetic for Defect Detection

A 3-D Imaging Method for Local Shallow Defects on the Surface of Ferromagnetic Materials

Detection of crack on a mild steel plate by using a magnetic probe incorporating an array of fluxgate sensors

Detection mechanism and magnetic field distribution characteristics for plate remote-field eddy-current testing

A magnetoelectric-ultrasonic multimodal system for synchronous NDE of surface and internal defects in metal

Research on Detection of Small Defects of Aluminum Plates Based on Electromagnetic Ultrasonic Lamb Wave