Effect of Sr Modification on Microstructures and Mechanical Properties of Al3Ti/ADC12 Composites

Liu Yuan

DOI: https://doi.org/10.1016/s1875-5372(18)30102-4

2018-01-01

Rare Metal Materials and Engineering

Abstract:The effects of Sr modification on the microstructure and properties of Al3Ti/ADC12 composite were investigated. The microstructures and fracture surfaces of the composite were examined by optical microscope and SEM. Results show that the addition of Sr reduces the sizes of the alpha-Al primary phase and Al3Ti particles and modifies the morphology of the composite. The optimum level of Sr content is 0.25 wt%, and the eutectic silicon changes from an acicular or short rod shape into a granule one. Coarse dendritic of the primary alpha-Al phases is fully refined. Results also show that Sr addition leads to the improvement in mechanical properties. Compared with matrix alloys, the tensile strength and elongation of the composite are increased by 36.9% and 58%, respectively when the Sr addition is 0.25 wt%. Furthermore, fractographic examinations reveals that cleavage surfaces and brittle plain area could hardly be seen from the Al3Ti/ADC12 composite with addition of 0.25 wt% Sr. The dimples are increased in quantity and diminished in size, deeper and well-distributed. The fracture appearances match the tendency of the tensile properties.