Abstract:BaTiO3 has advantages of high permittivity, low dielectric loss, low cost and environment friendly. However, due to the nonlinear dielectric behavior occurred around the phase transition temperature of BaTiO3 ceramic, its availability in the field of temperature-stable capacitor is limited. To modify the dielectric-temperature properties of BaTiO3, a series of BaTi1-xCexO3 (x=0-0.20) ceramics was synthesized by solid-state reaction method. Ce dopant was introduced into the B-site (Ti-site) of BaTiO3. The effects of Ce dopant on the phase evolution, defect state, microstructure and dielectric properties were investigated. The modifying mechanism was also discussed with the help of first-principles calculation method. In all ceramic samples, it is revealed that Ce element completely enters the B-site of BaTiO3 in the form of Ce4+ ion. With the increase of Ce doping concentration, the room temperature structure of BaTi1-xCexO3 ceramics transforms from tetragonal/pseudo-cubic structure into orthorhombic/tetragonal structure, then into pseudo-cubic structure. Owing to the radius difference between Ce4+ and Ti4+ ions, Ce doping will lead to the rising of lattice parameters, accompanied by the appearance of local distortion and the decrease of long-range ferroelectric order, the variation of band structure, density of states and charge density configuration, as well as the generation of Ba and Ti vacancies. Compared with pure BaTiO3 ceramic, the average grain size of Ce-doped ceramics decreases first and then increases with the increase of Ce content, while the relative density of ceramics increases gradually. The peak dielectric constant of BaTi1-xCexO3 ceramic increases first and then decreases as the Ce concentration increasing. The corresponding temperature is slowly reduced from 122 celcius to 112 celcius in the x value range of 0-0.08, then rapidly declines to -3 celcius in the x value range of 0.08-0.20. BaTi1-xCexO3 ceramics with x >= 0.06 have the dielectric behavior of diffused phase transition (DPT). And the x=0.20 ceramic exhibits the typical characteristic of relaxor ferroelectric, with the room temperature dielectric constant of 3258.38, and the |Delta epsilon(r)/epsilon(r25 celcius)|<= 22% temperature range of -60-87 celcius, which matches the requirement of EIA X5S standard. Therefore, it can be concluded that B-site Ce doping will effectively enhance the permittivity stability of BaTiO3 in a variable temperature environment. This will provide some new ideas to develop dielectric materials with stable dielectric properties in wide temperature range.

Tunable Electrocaloric and Energy Storage Behavior in the Ce, Mn Hybrid Doped BaTiO3 Ceramics

Enhanced low electric-field energy-storage performance in Ba0.9Sr0.1TiO3-Bi(Mg1/2Ti1/2)O-3 ceramics

Defect Dipoles Induced High‐energy Storage Density in Mn‐doped BST Ceramics Prepared by Spark Plasma Sintering

Broadening the Dielectric Stability Temperature Range of BNBST Relaxor Ferroelectric Ceramics by Rare Earth Ce Doping for Energy Storage

Improving Energy Storage Performance of Barium Titanate-Based Ceramics by Doping MnO2

Improved Dielectric and Energy Storage Properties of Ba0.8Ca0.2TiO3 Ceramics by Doping Ba(Mg1/3Nb2/3)O3

Electrocaloric Effect and Pyroelectric Energy Harvesting in Diffuse Ferroelectric Ba(Ti1-xCex)O-3 Ceramics

Manipulation of Curie temperature and ferroelectric polarization for large electrocaloric strength in BaTiO<sub>3</sub>-based ceramics

Experimental study and first-principles calculation of structural characteristics and dielectric properties of Ba Ti<sub>1-x </sub>Ce<sub>x </sub>O<sub>3</sub> ceramics

The Electrocaloric Effect in Intrinsic-Acceptor-doped Ba(Ti,Ce)O3-(Ba,Ca)TiO3 Ceramics

Rare-earth Element Doped Barium Titanate-Based Ceramics Exhibiting Ultra-Wide Temperature Span Electrocaloric Effect

Ultrahigh energy density and efficiency of BaTiO 3 -based ceramics via multiple design strategies

Enhanced Energy Storage Density by Inducing Defect Dipoles in Lead Free Relaxor Ferroelectric BaTiO3-based Ceramics

Significant enhancement of energy storage properties of BaTiO3-based ceramics by hybrid-doping

Giant Electrocaloric Response over A Broad Temperature Range in Modified BaTiO3 Ceramics

Improvement of Electro-Caloric Effect and Energy Storage Density in BaTiO3-Bi(Zn, Ti)O3 Ceramics Prepared with BaTiO3 Nano-Powder

Giant Electrocaloric Effect In Lead-Free Ba0.94ca0.06ti1-Xsnxo3 Ceramics With Tunable Curie Temperature

Large Electrocaloric Responsivity and Energy Storage Response in the Lead-Free Ba(GexTi1−x)O3 Ceramics

Enhanced energy storage performance in Na(Nb,Ta)O 3 -doped Ba(Ti,Ca)O 3 -based ceramics through bidirectional optimization strategy

Rational Co-Doping of SrZrO3 and BaTiO3 in Bi0.5Na0.5TiO3 for Extraordinary Energy Storage and Electrocaloric Performances

Enhanced Energy Storage Properties Promoted by the Synergistic Effects of Aging Effects and Relaxor Behavior in Ce-Mn Co-Doped Sr0.4Ba0.6Nb2O6 Ferroelectric Ceramics