Improvement of Electro-Caloric Effect and Energy Storage Density in BaTiO3-Bi(Zn, Ti)O3 Ceramics Prepared with BaTiO3 Nano-Powder

Geun-Soo Lee,Jeong-Seog Kim,Chae-Il Cheon
DOI: https://doi.org/10.3390/ma17133146
IF: 3.4
2024-06-28
Materials
Abstract:BaTiO3-Bi(Zn,Ti)O3 (BT-BZT) ceramics have been used as capacitors due to their large dielectric permittivity and excellent temperature stability and are good candidates for lead-free materials for electrocaloric and energy storage devices. However, BT-BZT ceramics often suffer from inferior properties and poor reproducibility due to heterogeneous compositional distribution after calcination and sintering. In this work, (1−x)BT-xBZT ceramics (x = 0~0.2) were fabricated with nano-sized BaTiO3 raw materials (nano-BT) by a solid-state reaction method to enhance the chemical homogeneity. The (1−x)BT-xBZT ceramics prepared from the nano-BT showed larger densities and more uniform microstructures at the lower calcination and sintering temperatures than the samples prepared from more frequently used micrometer-sized raw materials BaCO3, TiO2, Bi2O3, and ZnO. The (1−x)BT-xBZT ceramic prepared from the nano-BT displayed a phase transition from a tetragonal ferroelectric to a pseudo-cubic relaxor in a narrower composition range than the sample prepared from micro-sized raw materials. Larger adiabatic temperature changes due to the electro-caloric effect (ΔTECE) and recoverable energy storage density (Urec) were observed in the samples prepared from the nano-BT due to the higher breakdown electric fields, the larger densities, and uniform microstructures. The 0.95BT-0.05BZT sample showed the largest ΔTECE of 1.59 K at 80 °C under an electric field of 16 kV/mm. The 0.82BT-0.18BZT sample displayed a Urec of 1.45 J/cm2, which is much larger than the previously reported value of 0.81 J/cm2 in BT-BZT ceramics. The nano-BT starting material produced homogeneous BT-BZT ceramics with enhanced ECE and energy storage properties and is expected to manufacture other homogeneous solid solutions of BaTiO3 and Bi-based perovskite with high performance.
materials science, multidisciplinary,metallurgy & metallurgical engineering,physics, applied,chemistry, physical, condensed matter
What problem does this paper attempt to address?
This paper mainly discusses how to improve the electrocaloric effect (ECE) and energy storage density of BaTiO3-Bi(Zn, Ti)O3 ceramics by using nano-sized BaTiO3 raw materials. In this study, the authors prepared (1-x)BT-xBZT ceramics with different proportions through solid-state reaction method, and compared the performance of samples obtained using nano-sized BaTiO3 and traditional micro-sized raw materials (BaCO3, TiO2, Bi2O3, and ZnO). The paper pointed out that using nano-sized BaTiO3 raw materials can improve the density and uniformity of the ceramic microstructure, thus obtaining better performance at lower sintering temperature. In terms of the electrocaloric effect, the samples using nano-sized BaTiO3 showed larger adiabatic temperature change (ΔTECE) and recoverable energy storage density (Urec). For example, the ΔTECE of the 0.95BT-0.05BZT sample reached 1.59 K at 80°C and 16 kV/mm electric field, and the Urec of the 0.82BT-0.18BZT sample reached 1.45 J/cm², which is much higher than the previously reported values. Furthermore, the study also found that compared with micro-sized raw materials, nano-sized BaTiO3 can promote more uniform chemical reactions, reduce the problem of chemical inhomogeneity during the sintering process, and improve the electrical performance of ceramics, including higher breakdown electric field. This suggests that nano-sized BaTiO3 as a starting material is expected to be used in the production of high-performance BaTiO3-based and other bismuth-based perovskite solid solutions. The paper analyzed the crystal structure, microstructure, and dielectric phase transition behavior of the samples through experimental methods such as X-ray diffraction (XRD) and scanning electron microscopy (SEM), and compared the effects of different preparation methods on the electrocaloric effect and energy storage characteristics. The results show that the use of nano-sized BaTiO3 raw materials can effectively enhance the electrocaloric and energy storage performance of BaTiO3-Bi(Zn, Ti)O3 ceramics.