Abstract:Summary form only given. Exploding wire is performed by rapidly heating the wire to vaporization temperature with a high current pulse flowing through the wire. Exploding wires have found many applications among which are the opening switches named fuses in the circuits for inductive energy storage, the discharge loads of X-pinch or Z-pinches, namely wire array Z-pinches, and the production of nanopowders. The behavior of exploding wires for nanopowder production was studied by experiments and numerical simulation. In experiments, the evolution of the exploding wire was recorded by taking time- resolved pictures of the explosion with a Mach-Zehnder interferometer. From the interferograms the electron density and the expansion speed of the metallic vapor from the exploding wire can be deduced. The shock wave in front of the expanding wire could be visualized. In numerical simulation, the electrical behavior of exploding wires was obtained by solving nonlinear differential equation describing the discharge circuit. For the metal wires of high conductivity and low sublimation heat, such as Copper, Aluminum, Gold and Silver, the circuit simulation could be well conducted based on the resistivity model developed by Tucker1 in which the resisitivity was expressed with the explicit functions of specific action, i.e., p = f(g) . For the metals such as Titanium and Zinc of their resistivity anomalously changing, i.e., decreasing rather than increasing, with the liquid heating, the circuit simulation of the exploding wires could be performed using the implicit relationship between p and g that is read out point by point from the experimentally measured curve. With the circuit simulation the rate of the energy deposition in the exploding wires before the explosion could be obtained, which is helpful to choose right experimental conditions for possible overheat that is desirable for getting smaller nanopowders produced by exploding wires.

Experimental Study on Shock Wave Characteristics of Ammonium Nitrate Ignited by Wire Explosion

Study on Ignition Mechanism and Shockwave Characteristics of Nitramine Powders Ignited by Microsecond Exploding Wire Plasma

Generation of Electrohydraulic Shock Waves by Plasma-Ignited Energetic Materials: Ii. Influence of Wire Configuration and Stored Energy

Ignition Performance of Cu-wire Electrical Explosion Plasma on Energetic Materials

Shock Wave Characteristics Generated by Electrical Explosion of Different Wires in Water

Generation of Electrohydraulic Shock Waves by Plasma-Ignited Energetic Materials: I. Fundamental Mechanisms and Processes

Experimental Verification of the Vaporization's Contribution to the Shock Waves Generated by Underwater Electrical Wire Explosion under Micro-Second Timescale Pulsed Discharge

Experimental and Numerical Study of Shock Wave Propogation Produced by Underwater Electrical Wire Explosion

Detonation of a nitromethane-based energetic mixture driven by electrical wire explosion

Numerical Investigation of Shock Wave Characteristics at Microsecond Underwater Electrical Explosion of Cu Wires

A Comparison Study of Exploding a Cu Wire in Air, Water, and Solid Powders

Study of the Shock Waves Characteristics Generated by Underwater Electrical Wire Explosion

Underwater Pressure Waves Generated by Electrical Exploding Wire Ignited Energetic Materials: Parametric Study and Formulation Optimization

Generation of Electrohydraulic Shock Waves by Plasma-Ignited Energetic Materials: Iii. Shock Wave Characteristics with Three Discharge Loads

Parameter Regulation of Underwater Shock Waves Based on Exploding-Wire-ignited Energetic Materials

PRELIMINARY EXPERIMENT ON SHOCK WAVES GENERATED BY UNDERWATER ELECTRICAL EXPLOSION OF WIRES

Behavior of exploding wires

Experimental and Numerical Investigations on the Fast Electrical Explosion of Single Aluminum Wire in Vacuum

Effect of Medium Pressure and Charging Voltage on Plasma Characteristics During Microsecond Explosion of Single Metallic Wire

The Explosive Eletrical Characteristics Test Research on Electric Exploding Copper Wire

Study on the shock wave generated by underwater electrical explosion of Al wire coated with CuO powder