Abstract:The objective of this research was to develop a reinforced silica aerogel composites with enhanced thermal insulation performance under thermal-force coupling conditions. Phenolic-reinforced silica aerogel composites (RAs) were synthesized via a sol-immersion-gel process based on the in-situ polymerization of resorcinol (R), formaldehyde (F), and triaminopropyltriethoxysilane (APTES). Ambient pressure drying (APD) was used to dry the gels. Samples with different carbon/silica ratios, RA12, RA13, and RA14, were synthesized by controlling the R/APTES molar ratio at 1/2, 1/3, and 1/4. The densities of the RA12, RA13 and RA14 samples were 0.32 ± 0.005, 0.34 ± 0.006, and 0.37 ± 0.003 g/cm3. The thermal conductivity of the RA12, RA13, and RA14 samples were 0.024, 0.026, and 0.027 W/(m·K). The existence of the phenolic network favored the mechanical strength of the RAs, RA14 showed compressive strength, tensile strength, and three-point bending strength of 4.3 MPa at 20% strain, 2.4 MPa, and 8.4 MPa at 1.45% strain. The RAs showed excellent thermal insulation performance on a customized apparatus, the back temperature was as low as 219.82 °C and 330.67 °C within 60 min in the environments of 600 °C −0.01MPa and 600 °C −0.9MPa. The excellent thermal-shock performance of RAs was also demonstrated under flame exposure from a butane torch, with a temperature difference of 878 °C within 30 minutes being reported. The excellent thermal insulation performance of RAs under thermal-force coupling conditions reveals a widespread application perspective in the field of new energy vehicles power battery thermal protection.

Lightweight chopped carbon fibre reinforced silica-phenolic resin aerogel nanocomposite: Facile preparation, properties and application to thermal protection

Fabrication of SiCN(O) Aerogel Composites with Low Thermal Conductivity by Wrapping Mesoporous Aerogel Structures over Mullite Fibers

Lightweight and multiscale needle quartz fiber felt reinforced siliconoxycarbide modified phenolic aerogel nanocomposite with enhanced mechanical, insulative and flame-resistant properties

Preceramic polymer hybridized phenolic aerogels and the derived ZrC/SiC/C ceramic aerogels with ultrafine nanocrystallines

A facile in-situ strategy to fabricate lightweight carbon fiber/silicone-phenolic aerogel composites with superior toughness and ablation performance

Water-assisted synthesis of phenolic aerogel with superior compression and thermal insulation performance enabled by thick-united nano-structure

Iron metabolism and the liver with particular reference to the pathogenesis of haemochromatosis.

Carbon Foam-Reinforced Polyimide-Based Carbon Aerogel Composites Prepared via Co-Carbonization as Insulation Material

Hybrid aerogel composites reinforced with aramid fiber fabric for thermal protection

Fabrication of the SiC/HfC Composite Aerogel with Ultra-Low Thermal Conductivity and Excellent Compressive Strength

Thermally Insulating SiO2/PSA Composite Aerogels with Heat Resistance and Mechanical Properties via the Thiol-Yne Click Reaction

SiO2 aerogel multiscale reinforced by glass fibers and SiC nanowhiskers for thermal insulation

Silane modified MXene/polybenzazole nanocomposite aerogels with exceptional surface hydrophobicity, flame retardance and thermal insulation

Yttrium Silicate‐Coated Carbon Fiber Reinforced Phenolic Aerogel‐like Composites with Low Density and Low Ablation

Facile synthesis of phenolic-reinforced silica aerogel composites for thermal insulation under thermal-force coupling conditions

Bio-Inspired Aramid Fibers@silica Binary Synergistic Aerogels with High Thermal Insulation and Fire-Retardant Performance

Preparation and Properties of Flexible Phenolic Silicone Hybrid Aerogels for Thermal Insulation

Nanoporous Silica–Chitosan Aerogels for Thermal Insulation and Flame Retardancy

Fabrication of Large Aerogel-Like Carbon/Carbon Composites with Excellent Load-Bearing Capacity and Thermal-Insulating Performance at 1800 °C

Fabrication of Al2O3 aerogel-SiO2 fiber composite with enhanced thermal insulation and high heat resistance

Monolithic chitosan-silica composite aerogel with comprehensive performances prepared by SBG-FD method