Abstract:Poly ( Lactic Acid ) (PLA) is a biodegradable polymer which originates from natural resources such as corn and starch , offering excellent strength, biodegradability , nevertheless its inherent brittleness and low impact resistance properties ha ve limited its application. On the other hand , Thermoplastic Polyurethane (TPU) has high toughness, durability and flexibility , which is one of the most potential alternatives for enhancing the flexibility and mechanical strength of Poly ( Lactic Acid ) (PLA) by blending it with a compatibilizer. With the aim to improve the mechanical and thermal properties of Poly ( Lactic Acid ) (PLA) meltblown nonwovens, The Thermoplastic Polyurethane (TPU) was melt blend ed with Poly ( Lactic Acid ) (PLA) at the different corresponding proportions for toughening the Poly ( Lactic Acid ) and the corresponding PLA/TPU MBs (meltblown nonwovens) were also manufactured. Joncryl ADR 4400 is mixed in to the PLA matrix during processing. It was found that Joncryl had a much higher chain extension that substantially increased the molecular weight of the PLA matrix. SEM study revealed that Joncryl ADR 4400 is a good compatibilizer . Moreover, in this study , the crystallization, thermal and rheological behaviors of the corresponding PLA and TPU blends were also investigated. PLA/TPU MBs were also characterized by morphology and mechanical properties. The rheological property of the PLA/TPU meltblown nonwoven revealed that the viscosity is increasing as the amount of TPU is increasing in the blend, PLA/TPU melt blown nonwovens exhibited excellent mechanical properties; they are soft, elastic, and have certain tensile strength. New materials have potential applications in the medical and agricultural field s . Joncryl ADR 4400 compatibilized blends showed higher strength than simple PLA/TPU blends at the same PLA/TPU ratio.

Shape Memory Properties of Dynamically Vulcanized Poly(lactic Acid)/nitrile Butadiene Rubber (PLA/NBR) Thermoplastic Vulcanizates: the Effect of ACN Content in NBR

Nucleating Agent-Containing P(Lla-Mb-Bsa) Multi-Block Copolymers with Balanced Mechanical Properties

A Predictive Parameter for the Shape Memory Behavior of Thermoplastic Polymers

Unexpected Improvement of Both Mechanical Strength and Elasticity of EPDM/PP Thermoplastic Vulcanizates by Introducing β-Nucleating Agents

PLA/PCL/NR ternary blown films with high ductility and thermal shrinkage performance via dynamic vulcanization

The effect of physical compatibilization and dynamic vulcanization on the properties of thermoplastic vulcanizates derived from polypropylene and natural rubber blends

A Molecular Dynamics Simulation Study on Enhancement of Mechanical and Tribological Properties of Nitrile—Butadiene Rubber with Varied Contents of Acrylonitrile

A Facile and Environmentally Friendly Approach to Fabricate Hybrid Crosslinked Nitrile Butadiene Rubber with Comprehensively Improved Mechanical Performances by Incorporating Sacrificial Ionic Bonds

Morphology and mechanical properties of Acrylonitrile-styrene-acrylate toughened plastics with block copolymer chain structure: Acrylonitrile-styrene-acrylate (ASA) toughened plastics with block copolymer chain structure

Shape memory polylactic acid/modified Eucommia ulmoides gum thermoplastic vulcanizates based on excellent interfacial adhesion and co‐continuous structure

Shape memory, thermal conductivity, and mechanical property of polylactic acid and natural rubber composites reinforced by an inorganic thermal conductive network

The effect of organic clay on the properties of TPI/NR composite materials

Toughening and Shape Memory Effect on PLA/Copolymers Blends Produced by Simultaneous Dynamic Vulcanization and Reactive Compatibilization

Super-tough poly(lactic acid)/silicone rubber thermoplastic vulcanizates: The organic and inorganic synergistic interfacial compatibilization

Preparation of fully cross-linked CNBR/PP-g-GMA and CNBR/PP/PP-g-GMA thermoplastic elastomers and their morphology, structure and properties

A super-toughened poly(lactic acid)-based thermoplastic vulcanizate through incorporating modified SiO2 nanoparticles

Thermoplastic Elastomeric Blends of Nylon-6/Acrylate Rubber: Influence of Interaction on Mechanical and Dynamic Mechanical Thermal Properties

Supertough Shape Memory Bionanocomposites of Thermoplastic Vulcanizates Based on PLA- EVA and Cellulose Nanocrystal

Morphology, viscoelastic properties and the mechanical performance of highly toughened polyamide 6/acrylonitrile–butadiene–styrene/polylactic acid ternary blends

Improving the Compatibility of Biodegradable Poly (Lactic Acid) Toughening with Thermoplastic Polyurethane (TPU) and Compatibilized Meltblown Nonwoven

Molecular chain orientation and mechanical properties of hydrogenated nitrile-butadiene rubbers with different acrylonitrile content and crosslink density