Abstract:At present, the most prominent technical problems of small and medium capacity expanders are low internal efficiency and small expansion ratio. In order to promote the practical application of small and medium capacity Organic Rankine Cycle (ORC) system, improving the thermodynamic performance of the expander was a remarkable issue, and the systematic research on the irreversibility of expander's working process is the fundamental work to achieve this goal. Summarizing the related research on various small capacity volumetric expanders, the research on flow problem is lacked. For an atypical volumetric expander, the flow mechanism of single screw expanders (SSEs) is more complex. In this paper, we discussed the effect of the pressure loss in the inlet and exhaust passages on the performance of SSEs. We selected two SSE prototypes developed by our laboratory to carry out the experiment under variable working conditions. The internal volume ratios are 2.95 and 3.98 respectively. The pressure differences of inlet and exhaust passages were measured. In order to evaluate the effect of the flow losses on the performance, we defined two indexes: pressure loss rate (PLR) and pressure energy loss influence rate of shaft efficiency (PELRe). From the results, the pressure losses of inlet and exhaust passages for each SSE increase gradually, PLRin increases slightly and PLRout increases gradually. At the maximum point of shaft efficiency, the losses of the SSE with 2.95 are 28.06 kPa and 46.09 kPa, and the values of the SSE with 3.98 are 37.58 kPa and 33.79 kPa, respectively. It shows that the pressure losses are relatively high. The maximum values of internal and external expansion ratio for the SSE with 2.95 are 4.8 and 6 respectively, and the values of the SSE with 3.98 are 5.7 and 7 respectively. For ideal volume expansion, the internal expansion ratio of two prototypes should be 4.55 and 6.9, respectively. Summarizing the above results, how to enhance the pressure drop effect of leakage and reduce the flow resistance loss of inlet and exhaust passages simultaneously is an important technical premise to improve the expansion ratio by structural optimization. Meanwhile, PELRe of two prototypes are 16.01% and 13.59% respectively at the point. It shows that the flow losses of inlet and exhaust passages could significantly influence the performance of SSEs.

Optimization Study on Multicolumn Envelope Meshing Pair of Single Screw Compressor Based on Leakage Characteristics

Theoretical study on leakage characteristics of water-injected single screw vapor compressors with a multicolumn envelope meshing pair

Study on Usage Efficiency of Single Screw Compressor's Shaft Power Based on Exergy Analysis Method

A Mathematical Model Of Movable Component In Single Screw Compressor

A throughflow-based optimization method for multi-stage axial compressor

Semi-empirical modelling and analysis of single screw expanders considering inlet and exhaust pressure losses

Analysis of the leakage in a water-lubricated twin-screw air compressor

Optimal Contact Analysis of Meshing Pair for Single Screw Compressor

Experimental study and model optimization of thermodynamic performance of a single screw water vapor compressor

Meshing Pair Geometry of the Intersecting-Axis Internally Geared Screw Compressor

Modeling and analysis of a novel CPSC/CI combined profile for scroll compressors

Thermal Analysis Model of Scroll Compressor with Clearance Leakage Based on Multiple Scale Method

Theoretical and Experimental Research on Thermal Dynamic Characteristics of Single-Screw Compressor with a New Composite SLIDE valve

Investigation on the modifications of the suction flow passage in a scroll refrigeration compressor

Development of a chamber model considering non-uniform pressure distribution for twin-screw compressors

PIJ908106 Supplemental Material - Supplemental Material for Evaluation Standard and Improvement Method for Multi-Column Envelope Profile in Single Screw Compressors

A General Geometrical Model of Scroll Compressors Based on Discretional Initial Angles of Involute

Optimization and experimental study of stationary endwall of stator labyrinth cavity in a low-speed research compressor

Experimental study on the influence of inlet and exhaust pressure loss on the performance of single screw expanders

Design Optimization of a Blended Blade and Endwall in a Compressor Cascade

Research on Optimization of Profile Parameters in Screw Compressor Based on BP Neural Network and Genetic Algorithm