Abstract:To overcome the tradeoff between strength and ductility of materials and obtain titanium matrix composites with excellent mechanical properties, in this study, the in situ-synthesized TiC particles and Ti-Al-V-Mo-Cr (Ti1400) alloy-reinforced Ti6Al4V (TC4) matrix composites ((Ti1400 + TiC)/TC4) were fabricated by low-energy ball milling and spark plasma sintering. The inhomogeneous distribution of TiC particles and Ti1400 alloy, as well as the compositional and structural transition zone, were characterized. The TiC/TC4 composite displayed a significantly higher yield strength and tensile strength compared to the TC4 alloy. However, the total elongation of the TiC/TC4 composite was only 57% of that in the TC4 alloy. In contrast, the (Ti1400 + TiC)/TC4 composites exhibited noticeably higher total elongation than the TiC/TC4 composite. Furthermore, the tensile strength of the composite increased with the increase in Ti1400 alloy content. The increase in strength can be attributed to solid solution strengthening and fine grain strengthening. The compositional and structural transition zone, formed by element diffusion, provided a better interface combination between the reinforcements and TC4 matrix. In the transition zone and Ti1400 region, a large number of α/β interfaces can effectively alleviate the stress concentration, and the increase in the β phase can bear more plastic deformation, which is conducive to improving the elongation of the composite. As a result, the (Ti1400 + TiC)/TC4 composites exhibited simultaneous improvements in strength and ductility.

Microstructure and Mechanical Properties of Bio-Inspired Cf/Ti/Mg Laminated Composites

Fabrication of Fully Dense Tial-Based Composite Sheets with A Novel Microlaminated Microstructure

Fabrication, microstructure and compressive properties of Ti2AlC/TiAl composite with a bioinspired laminated structure

Balancing the strength and ductility of Ti2AlC/TiAl composite with a bioinspired micro-nano laminated architecture

Microstructure evolution and mechanical properties of bioinspired web-liked (TiB + TiC + Ti 3 Si)/TC4 composites

Design a Ti6Al4Vâ€“Ti43Al9V laminated composite with high strength and fracture toughness

Microstructure, Mechanical Properties and Fracture Mechanism of Ti2AlC Reinforced AZ91D Composites Fabricated by Stir Casting

Microstructure, solidification behavior and mechanical properties of Al-Si-Mg-Ti/TiC fabricated by selective laser melting

Microstructure and Mechanical Properties of Ti-Al-Ti-Ti2AlNb Laminated Composites Based on the Ductile-brittle Structure

Anisotropic microstructures and mechanical properties of textured Ti3AlC2/TiAl3/Al composite

Microstructure and mechanical properties of bioinspired laminated Al matrix hybrid reinforced with B4C and graphene nanoplatelets

Microstructure evolution and mechanical properties strengthening in laser powder bed fusion of high-strength SiC and TiB 2 co-reinforced Al-Zn-Mg-Cu composites

The Effect of Ti Particles Addition on the Microstructure and Mechanical Behavior of Mg AZ31/Al 6082 Composite Sheets

On the damage tolerance of 3-D printed Mg-Ti interpenetrating-phase composites with bioinspired architectures

Microstructures and the improved mechanical properties of AZ91 alloy by incorporating Ti-6Al-4V particles

Microstructure and Mechanical Properties of Ti2AlC-reinforced TiAl Composites

Microstructure and mechanical properties of in-situ TiC hybrid reinforced TC4 matrix composites by a new additive manufacturing method

Microstructure and mechanical properties of Zn based composites reinforced by Ti3AlC2

Simultaneous Improvement in Strength and Ductility of TC4 Matrix Composites Reinforced with Ti1400 Alloy and In Situ-Synthesized TiC

Microstructure and Mechanical Properties of a Novel Al-Mg-Sc-Ti Alloy Fabricated by Laser Powder Bed Fusion

Influence of Ti-6Al-4V particles on the interfacial microstructure and strength-ductility synergetic mechanism of AZ91 magnesium alloy