Abstract:The chemical-vapor-deposition (CVD) process is sufficiently well developed to allow the large-scale production of carbon nanotubes (CNTs). Metal nanoparticles (Fe, Co, Ni, etc.) are usually immobilized on a solid support and then decompose the gaseous hydrocarbon feedstocks into fragmented carbon units at elevated temperatures of 700-1100°C. Metal carbides are formed and then these dominate the growth of filamentous carbon as a structural template. The produced CNTs cannot stay firmly with an inert support and so inevitably detach away, especially during liquidphase purification or mechanical treatment. The biggest difficulties when handling the loose powder are filtration in the slurry-phase operations and the large pressure drops in fixed-bed reactors. These problems very much limit the application of CNTs on a large scale. The fabrication of carbon filaments on a structured support (e.g., activated carbon, carbon fibers, porous frameworks, graphite) has also suffered from discontinuities in the structure. The future use of CNTs has also been restricted by the technical requirements and the necessary high energy consumption to operate the intense and complicated CVD process. To avoid any mechanical post-treatment of powder and the risk of explosion during CVD synthesis, we have explored a simple method to produce monolithic CNTs directly as millimeter-scale spheres, featuring an integral continuity in the structure from microscopic to macroscopic scales. The whole process of CNTs growth has been conducted in a flow of ultrapure N2, involving a set of elementary steps in the solid phase being less complex than the widely used CVD process. The growth of CNTs is based on a solid reaction mechanism and well-graphitized nanotubes can be obtained even at a temperature as low as 400C. Direct observation of all growth events is made by using in-situ transmission electron microscopy (TEM), X-ray diffraction (XRD), IR, Raman spectroscopy and thermogravimetric analysis. A commercial styrene-divinylbenzene copolymer resin was used as the carbon precursor. According to Scheme 1, the ion-exchanged resin spheres were calcined at 800C in a flow of N2 or vacuum, after which the average diameter decreases from 0.77 to 0.49 mm, while the bulk density increases from 0.55 to 0.91 g ml. A novel macroscopic structure can be clearly seen, especially after the removal of the Fe nanoparticles and the amorphous carbon species by refluxing the spheres in concentrated HNO3. As seen in Fig. 1a, the twisted nanotubes construct the monolith while keeping a spherical shape. The cross-section views of the hand-broken spheres show no difference in the structure between the bulk and the surface, indicating a homogeneous distribution of the nanotubes in the millimeter-scale spheres (Fig. 1b). The nitrogen adsorption/ desorption isotherm shows a hysteresis loop to identify a typical mesoporous feature. The measured BET surface area and the pore volume are 223.7 m g and 0.42 ml g, respectively. The distribution of the pores ranges between about 2 and 15 nm.

Preparation of porous carbon nanotube/carbon composite spheres and their adsorption properties

Preparation of cage-like nano-CaCO3 hollow spheres for enhanced CO2 sorption

Synthesis of porous carbon nanotubes/activated carbon composite spheres and their application for vitamin B12 adsorption

Preparation of Na-alginate/CNTs Composite Spheres by Dripping-Gelatinization Process and Their Enhanced Adsorption of VB 12 by Freeze-Casting

Preparation of Sulfonated Porous Carbon Nanotubes/activated Carbon Composite Beads and Their Adsorption of Low Density Lipoprotein

Preparation and Properties of Multi-Walled Carbon Nanotube/carbon/polystyrene Composites

Preparation of carbon nanotubes/phenolic-resin-derived activated carbon spheres for the removal of middle molecular weight toxins

Convenient synthesis of porous carbon nanospheres with tunable pore structure and excellent adsorption capacity

Preparation of carbon nanotubes/activated carbon composite microspheres and their application to adsorption of VB12

Facile synthesis of ultrahigh-surface-area hollow carbon nanospheres for enhanced adsorption and energy storage

Porous hollow carbon nanotube composite cages.

Cordierite Reinforced Graphite Nanocomposite with Superior Adsorption Capacity Synthesized by In-Situ Carbon-Bed Pyrolysis Method

Preparation and adsorption application of carbon nanofibers with large specific surface area

Spherical Multi-Walled Carbon-Nanotube Architectures : Formation Mechanism and Catalytic Performance

Preparation of Regenerable Granular Carbon Nanotubes by a Simple Heating-Filtration Method for Efficient Removal of Typical Pharmaceuticals

Synergistic effect of pore generation and nitrogen doping on the enhanced CO 2 capture and selectivity of carbon nanofibers

Nanoporous carbon, its pharmaceutical applications and metal organic frameworks

Polyacrylonitrile‐based porous polymer spheres and their conversion to N‐doped carbon materials for adsorption and electrocatalysis

Chemical Vapor Infiltration Tailored Hierarchical Porous Cnts/C Composite Spheres Fabricated by Freeze Casting and Their Adsorption Properties

Carbon Nanotube–Chitosan Composite Beads with Radially Aligned Channels and Nanotube‐Exposed Walls for Bilirubin Adsorption

Preparation and Characterization of Monodisperse, Micrometer-Sized, Hierarchically Porous Carbon Spheres As Catalyst Support