Abstract:Due to issues such as limited variability in monitoring data across different tool wear conditions and interference during the machining process, data-driven monitoring models are susceptible to misclassification. Therefore, this paper proposes a pioneering approach that takes into account the tool wear law and the characteristic distribution of tool wear monitoring data. Specifically, the paper proposes an automatic feature extraction and tool condition monitoring method based on Siamese Long Short-term Memory Networks (SLSTMs) to transform the original data distribution, enhance the differentiation of different tool wear condition monitoring data, and achieve accurate prediction of tool wear condition. Additionally, a hybrid data and mechanism-driven tool wear monitoring method is proposed that takes advantage of the fact that tool wear is continuous and irreversible to enable reliable adjustment of the monitoring results of the data-driven model without human intervention. The study conducted milling experiments on a three-axis vertical machining center, using TA2 titanium alloy as the workpiece material. Vibration signals from the spindle in three directions were collected as input to the network, with tool wear state labeled as “0″ or ”1″ as the output. Classical machine learning algorithms such as Decision Trees, K-Nearest Neighbors (KNN) and Support Vector Machines (SVM), as well as classical deep learning algorithms such as Convolutional Neural Networks (CNN), Sparse Stacked Autoencoders (SSAE) and Long Short-Term Memory Neural Networks (LSTM), were used to construct and compare feature extraction and state monitoring models. The proposed model based on Siamese Long Short-Term Memory Neural Networks (SLSTMs) achieved testing average accuracy of 98.2% (σ2 = 0.44), outperforming typical deep learning algorithms such as CNN, LSTM and SSAE as well as traditional machine learning algorithms such as Decision Trees, KNN and SVM in terms of accuracy and robustness. Moreover, the proposed data and mechanism hybrid-driven tool wear monitoring method can effectively improve the monitoring accuracy and robustness of data-driven models such as CNN and SSAE. The monitoring accuracy of CNN and SSAE increased from 95.9% to 97.6% and 91.0% to 94.3%, respectively.

Tool Wear State Recognition Based on LS-SVM with the PSO Algorithm

Study on tool wear state monitoring based on EEMD information entropy and PSO-SVM

Tool wear state recognition based on GWO–SVM with feature selection of genetic algorithm

A Robust Cutting Pattern Recognition Method for Shearer Based on Least Square Support Vector Machine Equipped with Chaos Modified Particle Swarm Optimization and Online Correcting Strategy.

An effective LSSVM-based approach for milling tool wear prediction

Tool Wear State Identification Based on SVM Optimized by the Improved Northern Goshawk Optimization

Woodworking Tool Wear Condition Monitoring during Milling Based on Power Signals and a Particle Swarm Optimization-Back Propagation Neural Network

Tool Wear Condition Monitoring Using Emitted Sound Signals By Simple Machine Learning Technique

Tool wear condition monitoring method of five-axis machining center based on PSO-CNN

Tool Wear State Identification Based on the IWOA-VMD Feature Selection Method

An acoustic imaging recognition based cutting tools wear state prediction method

A Novel Method for Tool Identification and Wear Condition Assessment Based on Multi-Sensor Data

Application of audible sound signals for tool wear monitoring using machine learning techniques in end milling

Tool wear monitoring using a novel parallel BiLSTM model with multi-domain features for robotic milling Al7050-T7451 workpiece

Tool wear monitoring based on the combination of machine vision and acoustic emission

Intelligent recognition of tool wear in milling based on a single sensor signal

Tool wear monitoring with wavelet packet transform—fuzzy clustering method

Tool wear prediction based on convolutional bidirectional LSTM model with improved particle swarm optimization

Research on GA-SVM tool wear monitoring method using HHT characteristics of drilling noise signals

Tool wear classification based on maximal overlap discrete wavelet transform and hybrid deep learning model

A novel online tool condition monitoring method for milling titanium alloy with consideration of tool wear law