Abstract:ZnO based piezoelectric nanogenerators (PENG) hold immense potential for harvesting ambient vibrational mechanical energy into electrical energy, offering sustainable solutions in the field of self-powered sensors, wearable electronics, human–machine interactions etc. In this study, we have developed flexible ZnO-based PENGs by incorporating ZnO microparticles into PDMS matrix, with ZnO concentration ranging from 5 to 25 wt%. Among these, the PENG containing 15 wt% ZnO exhibited the best performance with an open-circuit output voltage/short-circuit current of ~ 42.4 V/2.4 μA. To further enhance the output performance of PENG, p-type NiO was interfaced with ZnO in a bulk hetero-junction geometry. The concentration of NiO was varied from 5 to 20 wt% with respect to ZnO and incorporated into the PDMS matrix to fabricate the PENGs. The PENG containing 10 wt% NiO exhibits the best performance with an open-circuit output voltage/short-circuit current of ~ 65 V/4.1 μA under loading conditions of 30 N and 4 Hz. The PENG exhibiting the best performance demonstrates a maximum instantaneous output power density ~ 37.9 μW/cm 2 across a load resistance of 20 MΩ under loading conditions of 30 N and 4 Hz, with a power density per unit force and Hertz of about ~ 0.32 μW/cm 2 ·N·Hz. The enhanced output performance of the PENG is attributed to the reduction in free electron concentration, which suppresses the internal screening effect of the piezopotential. To assess the practical utility of the optimized PENG, we tested the powering capability by charging various commercial capacitors and used the stored energy to illuminate 10 LEDs and to power a stopwatch displays. This work not only presents a straightforward, cost-effective, and scalable technique for enhancing the output performance of ZnO-based PENGs but also sheds light on its underlying mechanism.

High-performance Piezoelectric Composite Nanogenerator Based on Ag/(K,Na)NbO3 Heterostructure

Piezoelectric Nanogenerator Based on a Flexible Carbon-Fiber/zno–znse Bilayer Structure Wire

Ultrahigh energy harvesting properties in Ag decorated potassium-sodium niobite particle-polymer composite

A Self-Supported Structure Hybrid Triboelectric/piezoelectric Nanogenerator for Bio-Mechanical Energy Harvesting and Pressure Sensing

A High Output Voltage Flexible Piezoelectric Nanogenerator Using Porous Lead-Free Knbo3 Nanofibers

KNN/PDMS/C-based lead-free piezoelectric composite film for flexible nanogenerator

A hybrid piezoelectric nanogenerator comprising of KNN/ZnO nanorods incorporated PVDF electrospun nanocomposite webs

A Record Flexible Piezoelectric KNN Ultrafine-Grained Nanopowder-Based Nanogenerator

R-Shaped Hybrid Nanogenerator with Enhanced Piezoelectricity.

Synthesis of KNN nanoblocks through surfactant-assisted hot injection method and fabrication of flexible piezoelectric nanogenerator based on KNN-PVDF nanocomposite

Lead-free, High-Current Output Piezoelectric Nanogenerators Using Three-Dimensional Interdigitated Electrodes

High-performance flexible lead-free piezo-antiferroelectric based on NaNbO3/PDMS composites for energy harvesting application

High-performance Ag nanowires/PEDOT:PSS composite electrodes for PVDF-HFP piezoelectric nanogenerators

High-k Lead-Free Ferroelectric KNN as an Electron Blocking Layer toward Efficient Hybrid Piezoelectric–Triboelectric Nanogenerators

Tuning ZnO-based piezoelectric nanogenerator efficiency through n-ZnO/p-NiO bulk interfacing

Integrated Nanospheres Occupancy-Removal and Thermoforming into Bulk Piezoelectric and Triboelectric Hybrid Nanogenerators with Inverse Opal Nanostructure

A High Power ZnO Thin Film Piezoelectric Generator

Enhanced Piezoelectric Performance of the ZnO/AlN Stacked Nanofilm Nanogenerator Grown by Atomic Layer Deposition

Flexible and Stable Piezoelectric Nanogenerators Based on Monoclinic Phase CsPbBr3 Perovskite Nanocrystals

High‐performance flexible piezoelectric nanogenerator based on n ecklace‐like PZT particle chains

High-performance Piezoelectric Nanogenerators Based on Cs2Ag0.3Na0.7InCl6 Double Perovskites with High Polarity Induced by Zr/Te Codoping