Abstract:A highly efficient and large area piezoelectric ZnO thin film nanogenerator (NG) was fabricated. The ZnO thin film was deposited onto a Si substrate by pulsed laser ablation at a substrate temperature of 500 degrees C. The deposited ZnO film exhibited a preferred c-axis orientation and a high piezoelectric value of 49.7 pm/V characterized using Piezoelectric Force Microscopy (PFM). Thin films of ZnO were patterned into rectangular power sources with dimensions of 0.5 x 0.5 cm(2) with metallic top and bottom electrodes constructed via conventional semiconductor lithographic patterning processes. The NG units were subjected to periodic bending/unbending motions produced by mechanical impingement at a fixed frequency of 100 Hz at a pressure of 0.4 kg/cm(2). The output electrical voltage, current density, and power density generated by one ZnO NG were recorded. Values of 95 mV, 35 A cm(-2) and 5.1 mW cm(-2) were recorded. The level of power density is typical to that produced by a PZT NG on a flexible substrate. Higher energy NG sources can be easily created by adding more power units either in parallel or in series. The thin film ZnO NG technique is highly adaptable with current semiconductor processes, and as such, is easily integrated with signal collecting circuits that are compatible with mass production. A typical application would be using the power harvested from irregular human foot motions to either to operate blue LEDs directly or to drive a sensor network node in mille-power level without any external electric source and circuits. (C) 2015 Elsevier B.V. All rights reserved.

A Record Flexible Piezoelectric KNN Ultrafine-Grained Nanopowder-Based Nanogenerator

Piezoelectric Nanogenerator Based on a Flexible Carbon-Fiber/zno–znse Bilayer Structure Wire

A Self-Supported Structure Hybrid Triboelectric/piezoelectric Nanogenerator for Bio-Mechanical Energy Harvesting and Pressure Sensing

KNN/PDMS/C-based lead-free piezoelectric composite film for flexible nanogenerator

High-performance Piezoelectric Composite Nanogenerator Based on Ag/(K,Na)NbO3 Heterostructure

A hybrid piezoelectric nanogenerator comprising of KNN/ZnO nanorods incorporated PVDF electrospun nanocomposite webs

Synthesis of KNN nanoblocks through surfactant-assisted hot injection method and fabrication of flexible piezoelectric nanogenerator based on KNN-PVDF nanocomposite

High-k Lead-Free Ferroelectric KNN as an Electron Blocking Layer toward Efficient Hybrid Piezoelectric–Triboelectric Nanogenerators

A High Output Voltage Flexible Piezoelectric Nanogenerator Using Porous Lead-Free Knbo3 Nanofibers

Fabrication of Flexible Energy Harvesting Device Based on K0.5Na0.5NbO3 Nanopowders

Ultrahigh piezoelectric coefficients of Li-doped (K,Na)NbO3 nanorod arrays with manipulated O-T phase boundary: Towards energy harvesting and self-powered human movement monitoring

Development of KNNLTS–PVDF-based flexible piezoelectric generator for energy-harvesting application

Ultrahigh energy harvesting properties in Ag decorated potassium-sodium niobite particle-polymer composite

One dimensional lead-free (K,Na)NbO 3 nanostructures for a flexible self-powered sensor.

A Flexible Piezoelectric-Pyroelectric Hybrid Nanogenerator Based on P(VDF-TrFE) Nanowire Array

K< inline-formula>< mml: math xmlns: mml=

A High Power ZnO Thin Film Piezoelectric Generator

One-dimensional KNN Micro Rods Doping to Facilitate the Energy Conversion Performance of a KNN MRs/P(VDF-TrFE) Composite

Novel flexible nanogenerators

R-Shaped Hybrid Nanogenerator with Enhanced Piezoelectricity.

High-Performance Piezoelectric Nanogenerator of BTO-PVDF Nanofibers for Wearable Sensing