Novel Nitrogen-Doped Reduced Graphene Oxide-Bonded Sb Nanoparticles for Improvedsodium Storage Performance

Yichen Du

DOI: https://doi.org/10.1039/c8ta02945h

IF: 11.9

2018-01-01

Journal of Materials Chemistry A

Abstract:Novel nitrogen-doped reduced graphene oxide-bonded Sb nanoparticles are developed using the ionic liquid Emim-dca as a nitrogen source for improved sodium storage performance.

What problem does this paper attempt to address?

Carbon-coated Graphene/antimony Composite with a Sandwich-Like Structure for Enhanced Sodium Storage

Jinzuan Wang,Jun Yang,Wenyan Yin,Shin-ichi Hirano

DOI: https://doi.org/10.1039/c7ta06770d

IF: 11.9

2017-01-01

Journal of Materials Chemistry A

Abstract:A carbon-coated graphene/antimony composite (G@Sb@C) with a sandwich-like structure has been synthesized and it exhibits superior electrochemical performances for sodium storage.
Nitrogen and sulfur co-doped mesoporous hollow carbon spheres for high rate sodium ion storage

Zhu, Fuliang

DOI: https://doi.org/10.1007/s10854-023-10289-x

2023-04-08

Abstract:Sodium-ion batteries (SIBs) exhibit an similar storage mechanism to lithium ion batteries (LIBs). Since lithium is costly and sodium is abundant on earth, SIBs have potential to replace LIBs in many applications, especially large-scale energy storage. Carbonaceous materials have special advantages for sodium ion storage, including low cost, high capacity and high conductiviy. However, the storage properties of carbonaceous materials are expected to be improved to meet the development of SIBs. Structure design and heteroatoms doping are two effective approaches to enhance the capacity and rate performance of carbonaceous materials for sodium storage. In this paper, nitrogen and sulfur co-doped mesoporous hollow carbon spheres (NSHCSs) are synthesized through a facile pyrolysis process, using ionic liquid [EMIm]HSO 4 as the heteroatom source and phenolic resin as the carbon source. Owing to the hollow structure and element co-doping, the NSHCSs possess high surface area, abundant defects and enlarged interlayer spacing. The electrochemical measurements demonstrate the NSHCSs possess excellent sodium storage properties, with reversible capacities of 245.8, 229.6, 197.9, 169.7, 150.5, 123.0, and 86.2 mAh g −1 at 0.1, 0.2, 0.5, 1, 2, 5, and 10 A g −1 , respectively. The NSHCSs also display superior capacity retention, with a capacity of 124.7 mAh g −1 after 900 cycles at a high rate of 5 A g −1 .

engineering, electrical & electronic,materials science, multidisciplinary,physics, condensed matter, applied
Sulfur-/Nitrogen-Rich Albumen Derived "Self-Doping" Graphene for Sodium-Ion Storage.

Siyuan Li,Zeheng Li,Gaoyao Cao,Min Ling,Jiapeng Ji,Dian Zhao,Ying Sha,Xuehui Gao,Chengdu Liang

DOI: https://doi.org/10.1002/chem.201902575

2019-01-01

Chemistry

Abstract:The development of sodium-ion batteries (SIBs) is hindered by the rapid reduction in reversible capacity of carbon-based anode materials. Outside-in doping of carbon-based anodes has been extensively explored. Nickel and NiS2 particles embedded in nitrogen and sulfur codoped porous graphene can significantly improve the electrochemical performance. Herein a built-in heteroatom "self-doping" of albumen-derived graphene for sodium storage is reported. The built-in sulfur and nitrogen in albumen act as the doping source during the carbonization of proteins. The sulfur-rich proteins in albumen can also guide the doping and nucleation of nickel sulfide nanoparticles. Additionally, the porous architecture of the carbonized proteins is achieved through removable KCl/NaCl salts (medium) under high-temperature melting conditions. During the carbonization process, nitrogen can also reduce the carbonization temperature of thermally stable carbon materials. In this work, the NS-graphene delivered a specific capacity of 108.3 mAh g(-1) after 800 cycles under a constant current density of 500 mA g(-1). In contrast, the Ni/NiS2/NS-graphene maintained a specific capacity of 134.4 mAh g(-1); thus the presence of Ni/NiS2 particles improved the electrochemical performance of the whole composite.
Uniformly-distributed Sb nanoparticles in ionic liquid-derived nitrogen-enriched carbon for highly reversible sodium storage

Xin Xu,Zhifeng Dou,Erlong Gu,Ling Si,Xiaosi Zhou,Jianchun Bao

DOI: https://doi.org/10.1039/c7ta03434b

IF: 11.9

2017-01-01

Journal of Materials Chemistry A

Abstract:We report a novel composite of Sb nanoparticles uniformly embedded in ionic liquid-derived nitrogen-enriched carbon (Sb@NC) obtained by pyrolysis of SbCl 3 /1-ethyl-3-methylimidazolium dicyanamide (Emim-dca) as a promising anode material for sodium-ion batteries.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Optimization of SbBix Nanoparticles Embedded in Ultra-Thin Carbon Networks for Enhanced Sodium/potassium Storage

Qingxin Lin,Jian Qin,Yanyan Cao,Xiaokang Li,Yan Hong,Meichen Jin,Jinjuan Dong,Wei Xiao,Wenbin Li,Jingjing Wang,Xifei Li

DOI: https://doi.org/10.1016/j.cej.2023.145717

IF: 15.1

2023-01-01

Chemical Engineering Journal

Abstract:The alloy proportions of SbBix show obvious influence on sodium/potassium storage. Herein, SbBix nanoparticles embedded in ultra-thin carbon networks (SbBix@C, x = 1, 0.5, 0.15) are successfully synthesized by a facile salt template assisted pyrolysis method. The effect of different alloy proportions on the chemical and electrochemical properties of active materials is revealed. Density functional theory calculation demonstrates that SbBi0.5 has the smallest formation energy (-5.131 eV) and the smallest volume expansion rate for both sodium/potassium storage (222%/376%). Benefiting from the optimized volume expansion for both sodium/potassium storage and carbon networks structure, the optimized SbBi0.5@C anode shows high reversible capacities of 301 mAh/g and 390 mAh/g after 100 cycles at 0.1 A/g for sodium/potassium storage, respectively. It is also observed that the SbBi0.5@C anode delivers different behaviours of sodium/potassium storage, which is due to the various composition of SEI films formed after sodium/potassium storage. It is believed that this work provides a synthetic strategy for fabricating alloy-type anode materials for SIBs/PIBs, in view of structure design and the regulation of alloy proportion.
2D Sandwich-Like Nanosheets of Ultrafine Sb Nanoparticles Anchored to Graphene for High-Efficiency Sodium Storage

Xiaowu Liu,Man Gao,Hai Yang,Xiongwu Zhong,Yan Yu

DOI: https://doi.org/10.1007/s12274-017-1627-y

2017-01-01

Abstract:Sb is considered a promising anode material for high-performance sodium-ion batteries (NIBs) owing to its high theoretical specific capacity (660 mAh·g−1). However, Sb shows a very large volume change (∼200%) during sodiation and desodiation, leading to poor electrochemical performance. Here, we designed and tested a sandwich-like graphene-supported Sb nanocomposite (denoted Sb@RGO@Sb), in which ultrafine Sb nanoparticles are uniformly anchored on a reduced graphene oxide (RGO) surface. The ultrafine Sb nanocrystals anchored on the RGO surface minimize the aggregation of Sb and inhibit restacking of the RGO sheets, leading to a minimum transport length for both ions and electrons. The graphene layer not only accommodates the large volume variation of Sb during cycling but also promotes the electron conductivity of the whole electrode. Owing to its unique structure, this sandwich-like composite exhibits superior sodium storage properties.
Binding Sulfur-Doped Nb2O5 Hollow Nanospheres on Sulfur-Doped Graphene Networks for Highly Reversible Sodium Storage

Fanfan Liu,Xiaolong Cheng,Rui Xu,Ying Wu,Yu Jiang,Yan Yu

DOI: https://doi.org/10.1002/adfm.201800394

IF: 19

2018-01-01

Advanced Functional Materials

Abstract:Orthorhombic Nb2O5 (T-Nb2O5) has recently attracted great attention for its application as an anode for sodium ion batteries (NIBs) owing to its patulous framework and larger interplanar lattice spacing. Sulfur-doped T-Nb2O5 hollow nanospheres (diameter:180 nm) uniformly encapsulate into sulfur-doped graphene networks (denoted: S-Nb2O5 HNS@S-rGO) using hard template method. The 3D ordered porous structure not only provides good electronic transportation path but also offers outstanding ionic conductive channels, leading to an improved sodium storage performance. In addition, the introduction of sulfur to graphene and Nb2O5 leads to oxygen vacancy and enhanced electronic conductivity. The sodium storage performance of S-Nb2O5 HNS@S-rGO is unprecedented. It delivers a reversible capacity 215 mAh g(-1) at 0.5 C over 100 cycles. In addition, it also possesses a great high-rate capability, retaining a stable capacity of 100 mAh g(-1) at 20 C after 3000 cycles. This design demonstrates the potential applications of Nb2O5 as anode for high performance NIBs.
A Flexible Sulfur-Enriched Nitrogen Doped Multichannel Hollow Carbon Nanofibers Film for High Performance Sodium Storage.

Xizhen Sun,Changlai Wang,Yue Gong,Lin Gu,Qianwang Chen,Yan Yu

DOI: https://doi.org/10.1002/smll.201802218

IF: 13.3

2018-01-01

Small

Abstract:Heteroatom doping is regarded as a promising method to enhance the sodium storage performance of carbon materials. In this work, a sulfur-enriched N-doped multichannel hollow carbon nanofiber (denoted as S-NCNF) film is prepared through electrospinning technology and heat treatment with sublimed sulfur as the flexible anode for sodium ion batteries (NIBs). The S-NCNF film displays outstanding electrochemical performance, particularly with a high rate capacity (132 mA h g-1 at the current density of 10 A g-1 ) and remarkable long cycling stability (reversible specific capacity of 187 mA h g-1 at 2 A g-1 over 2000 cycles). The improved sodium storage performance results from the unique 3D structure, abundant defects, and increased interlayer spacing of S-NCNFs. The density functional theory calculations demonstrate that nitrogenous carbon nanofibers doping with sulfur could not only promote the adsorption of sodium but also favor electrons' transfer. This strategy has been demonstrated as a general process to design free-standing carbon-based thin film with other heteroatom doping.
Bimetallic Copper Tin Sulfide Nanosheet Arrays Encapsulated in Nitrogen-Doped Carbon Shells for Boosted Sodium Storage Performance

Jingyi Zhang,Chongwei Li,Jinchuan Hou,Jing Zhang,Liang Wang,Peijia Wang,Zhujun Yao,Yefeng Yang

DOI: https://doi.org/10.1021/acsaem.1c01766

IF: 6.4

2021-01-01

ACS Applied Energy Materials

Abstract:SnS2 has been conceived as a promising candidate for sodium-ion batteries (SIBs); however, the inferior intrinsic electrical conductivity, huge volume variation, and continuous pulverization upon cycling still hamper its practical application. To tackle these issues, a honeycomb-like hybrid architecture is delicately designed and constructed by encapsulating Cu-doped SnS2 nanosheet arrays in N-doped carbon coating (denoted as Cu-SnS2@NC). Benefitting from the synergistic effects of N-doped carbon coating and moderate Cu doping, the hybrid nanoarrays can effectively facilitate the ion/electron transfer ability, mitigate the mechanical stress, and improve the structural stability in the repeated Na+ insertion/extraction process. The optimal CuSnS2@NC nanoarrays display a remarkably high specific capacity of 1041.8 mA h g(-1) at 0.1 A g(-1) and much improved rate performance and cycling durability. By coupling the pseudocapacitive behavior-dominated Cu-SnS2@NC anode with the Na3V2(PO4)(3) cathode, the full battery provides a high energy density of 232.4 W h kg(-1) at a power density of 239.6 W kg(-1). This work shall bring more insight into the ingenious design and fabrication of bimetallic sulfide arrays as advanced anodes for SIBs.
Nanodot‐in‐Nanofiber Structured Carbon‐Confined Sb 2 Se 3 Crystallites for Fast and Durable Sodium Storage

Qinghua Li,Wei Zhang,Jian Peng,Dandan Yu,Zhixin Liang,Wang Zhang,Jiawei Wu,Gaoyu Wang,Haixia Li,Shaoming Huang

DOI: https://doi.org/10.1002/adfm.202112776

IF: 19

2022-01-20

Advanced Functional Materials

Abstract:Abstract Antimony‐based materials possess high specific capacity and appropriate redox potential for sodium storage, but they suffer from huge volume expansion/contraction when sodium ions insert/extract, which leads to inferior cycle life. Herein, a hierarchical nanodot‐in‐nanofiber structure is proposed to address this challenge, in which antimony selenide (Sb 2 Se 3 ) nanocrystallites are confined by both 0D and 1D carbon layers. The multi‐pronged nanostructure reduces the size of active particles, alleviates the intrinsic volume change of Sb 2 Se 3 , and forms a stable transport network for charge carriers. Finally, the nanodot‐in‐nanofiber structured Sb 2 Se 3 anode exhibits outstanding performance for sodium storage, such as high capacity and exceptional cycle lifespan for over 10 000 cycles at 2.0 A g −1 . Therefore, this work can be valuable for the rational design of ultra‐stable alloy and conversion‐type materials in the application of next‐generation batteries.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Sodium‐Ion Batteries: Sb Nanoparticles Encapsulated in a Reticular Amorphous Carbon Network for Enhanced Sodium Storage (small 40/2015)

Min Wang,Zhenzhong Yang,Jiaqing Wang,Weihan Li,Lin Gu,Yan Yu

DOI: https://doi.org/10.1002/smll.201570245

IF: 13.3

2015-01-01

Small

Abstract:Sb nanoparticles encapsulated in 3D reticular carbon network (Sb@3D RCN) films are designed and fabricated by Y. Yu and co-workers using an electrostatic spray deposition (ESD) technique. On page 5381, the Sb@3D RCN film shows excellent sodium storage performance. The nanostructured anode not only shortens the diffusion length of ions/electrons in the electroactive particles (Sb), but also offers a buffer to accommodate the huge volume change during repeated sodiation/desodiation processes.
Confining MOF-derived SnSe nanoplatelets in nitrogen-doped graphene cages via direct CVD for durable sodium ion storage

Chen Lu,Zhenzhu Li,Zhou Xia,Haina Ci,Jingsheng Cai,Yingze Song,Lianghao Yu,Wanjian Yin,Shixue Dou,Jingyu Sun,Zhongfan Liu

DOI: https://doi.org/10.1007/s12274-019-2551-0

IF: 9.9

2019-11-04

Nano Research

Abstract:Tin-based compounds are deemed as suitable anode candidates affording promising sodium-ion storages for rechargeable batteries and hybrid capacitors. However, synergistically tailoring the electrical conductivity and structural stability of tin-based anodes to attain durable sodium-ion storages remains challenging to date for its practical applications. Herein, metal-organic framework (MOF) derived SnSe/C wrapped within nitrogen-doped graphene (NG@SnSe/C) is designed targeting durable sodium-ion storage. NG@SnSe/C possesses favorable electrical conductivity and structure stability due to the "inner" carbon framework from the MOF thermal treatment and "outer" graphitic cage from the direct chemical vapor deposition synthesis. Consequently, NG@SnSe/C electrode can obtain a high reversible capacity of 650 mAh·g−1 at 0.05 A·g−1, a favorable rate performance of 287.8 mAh·g−1 at 5 A·g−1 and a superior cycle stability with a negligible capacity decay of 0.016% per cycle over 3,200 cycles at 0.4 A·g−1. Theoretical calculations reveal that the nitrogen-doping in graphene can stabilize the NG@SnSe/C structure and improve the electrical conductivity. The reversible Na-ion storage mechanism of SnSe is further investigated by in-situ X-ray diffraction/ex-situ transmission electron microscopy. Furthermore, assembled sodium-ion hybrid capacitor full-cells comprising our NG@SnSe/C anode and an active carbon cathode harvest a high energy/power density of 115.5 Wh·kg−1/5,742 W·kg−1, holding promise for next-generation energy storages.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Sb Nanoparticles Encapsulated in a Reticular Amorphous Carbon Network for Enhanced Sodium Storage

min wang,zhenzhong yang,jiaqing wang,weihan li,lin gu,yan yu

DOI: https://doi.org/10.1002/smll.201501313

IF: 13.3

2015-01-01

Small

Abstract:Sb nanoparticles encapsulated in 3D reticular carbon network (denoted Sb@3D RCN) film are prepared by the electrostatic spray deposition technique followed by a heat treatment. When used as a binder-free anode for a Na-ion battery, it shows excellent long-life cyclability. The unique reticular, porous, and core-shell structure of Sb@3D RCN contributes significantly to the excellent sodium storage performance.
Design Nitrogen (N) and Sulfur (S) Co-Doped 3D Graphene Network Architectures for High-Performance Sodium Storage.

Yu Jiang,Ying Wu,Yuexi Chen,Zhenyu Qi,Jinan Shi,Lin Gu,Yan Yu

DOI: https://doi.org/10.1002/smll.201703471

IF: 13.3

2018-01-01

Small

Abstract:To develop high-performance sodium-ion batteries (NIBs), electrodes should possess well-defined pathways for efficient electronic/ionic transport. In this work, high-performance NIBs are demonstrated by designing a 3D interconnected porous structure that consists of N, S co-doped 3D porous graphene frameworks (3DPGFs-NS). The most typical electrode materials (i.e., Na3V2(PO4)(3) (NVP), MoS2, and TiO2) are anchored onto the 3DPGFs-NS matrix (denoted as NVP@C@3DPGFs-NS; MoS2@C@3DPGFs-NS and TiO2@C@3DPGFs-NS) to demonstrate its general process to boost the energy density of NIBs. The N, S co-doped porous graphene structure with a large surface area offers fast ionic transport within the electrode and facilitates efficient electron transport, and thus endows the 3DPGFs-NS-based composite electrodes with excellent sodium storage performance. The resulting NVP@C@3DPGFs-NS displays excellent electrochemical performance as both cathode and anode for NIBs. The MoS2@C@3DPGFs-NS and TiO2@C@3DPGFs-NS deliver capacities of 317 mAhg(-1) at 5 Ag-1 after 1000 cycles and 185 mAhg(-1) at 1 Ag-1 after 2000 cycles, respectively. The excellent long cycle life is attributed to the 3D porous structure that could greatly release mechanical stress from repeated Na+ extraction/insertion. The novel structure 3D PGFs-NS provides a general approach to modify electrodes of NIBs and holds great potential applications in other energy st(o)rage fields.
Low-surface-area Nitrogen Doped Carbon Nanomaterials for Advanced Sodium Ion Batteries.

Chaokun Liu,Jiangtao Hu,Luyi Yang,Wenguang Zhao,Hejie Li,Feng Pan

DOI: https://doi.org/10.1039/c7cc09911h

IF: 4.9

2018-01-01

Chemical Communications

Abstract:A low-surface-area nitrogen-doped carbon nanomaterial was prepared via a facile annealing method, which shows good Na-ion storage ability (334 mA g-1) and coulombic efficiency due to its mixed charge-discharge mechanism and unique structural features.
Nano-size NiS Particles Anchored on Nitrogen-Doped Reduced Graphene Oxide for Superior Sodium Storage

Shunjiang Zhang,Ruirui Wang,Ronggen Cao,Fang

DOI: https://doi.org/10.1016/j.jallcom.2021.161316

IF: 6.2

2021-01-01

Journal of Alloys and Compounds

Abstract:Nickel sulfides are regarded as promising anode materials for sodium-ion battery due to their natural abundance and high theoretical capacity. However, they are subjected to poor conductivity and severe volume variation during charging/discharging process, leading to sluggish kinetics and rapid capacity loss. To address these dilemmas, a hybrid composite consisting of nickel sulfide nanoparticles uniformly anchored on the nitrogen-doped reduced graphene oxide (NiS@N-rGO) has been fabricated through a facile sulfidation of ultrathin Ni(OH)2/rGO precursor. Owing to the high electronic conductivity of composite, alleviated volume expansion and accelerated ion diffusion, the NiS@N-rGO composite exhibits an initial specific capacity as high as 872.8 mAh g-1 at a current density of 0.2 A g-1 and maintain 300 mAh g-1 at a current density of 1 A g-1 after 300 cycles when employed as anode in sodium-ion batteries (SIBs). This work may present a new avenue in the design of electrode materials with excellent performance for SIBs in the future. (c) 2021 Published by Elsevier B.V.
Binding Nanosized Cobalt Chalcogenides in B,N‐Codoped Graphene for Enhanced Sodium Storage

Xiaolong Cheng,Dongjun Li,Fanfan Liu,Rui Xu,Yan Yu

DOI: https://doi.org/10.1002/smtd.201800170

IF: 12.4

2018-01-01

Small Methods

Abstract:A general process is developed to prepare binding nanosized cobalt chalcogenides in B,N-codoped graphene (CoSe2/BNG and CoS2/BNG). When used as anodes for sodium-ion batteries, the CoSe2/BNG and CoS2/BNG deliver excellent sodium-storage performance. The CoSe2/BNG displays a reversible capacity of 270 mAh g(-1) after 2000 cycles at a current density of 1 A g(-1). Even at 20 A g(-1), it can still give a capacity of 187 mAh g(-1). Moreover, the CoS2/BNG shows 387 mAh g(-1) at 10 A g(-1), demonstrating its superior high rate performance. The enhanced sodium-storage properties of the CoSe2/BNG and CoS2/BNG nanocomposites may be attributed to the high conductive graphene network, enhanced sodium storage of B,N-codoping in graphene, and the small CoSe2 and CoS2 nanocrystallites that shorten the electronic and ionic diffusion length throughout the electrode.
Ultrafine Sb2S3@carbon-nanofibers for fast and stable sodium storage

Dongdong Li,Shufang Zhao,Junzhi Li,Zeyu Yuan,Junming Cao,Xiyao Fu,Yuming Zhang,Lili Wang,Wei Han

DOI: https://doi.org/10.1016/j.electacta.2022.140067

IF: 6.6

2022-04-01

Electrochimica Acta

Abstract:Sb2S3 has great theoretical capacity (946 mAh g−1), suitable working potential, and relatively low cost, and it has attracted attention as a potential anode material for sodium-ion batteries. However, the tardy diffusion of sodium ions and significant volume expansion hinder their practical application in sodium ion batteries. In this study, we encapsulated Sb2S3 nanoparticles in porous carbon nanofibers (CNFs) using electrospinning and gas vulcanization. The unique porous fiber structure and ultrafine Sb2S3 nanoparticles effectively improved diffusion speed and volume expansion of sodium ions, and they showed fast sodium-ion storage capacity and excellent cycle stability. The Sb2S3@CNFs used as the anode of a sodium-ion battery exhibited a remarkably reversible specific capacity of 151.3 mAh g−1 at 10 A g−1 for 500 cycles. A full cell assembled with Sb2S3@CNFs and Na3V2(PO4)3 (NVP) showed a reversible specific capacity of 283 mAh g−1 at 0.2 A g−1 after 100 cycles. Therefore, Sb2S3@CNFs has an excellent practical application in sodium-ion batteries owing to its simple synthesis method, excellent electrochemical performance, and suitable reaction potential.

electrochemistry
Carbon skeleton confined Sb chalcogenides nanodots for stable sodium storage

Li Yang,Minling Liu,Yinger Xiang,Wentao Deng,Guoqiang Zou,Hongshuai Hou,Xiaobo Ji

DOI: https://doi.org/10.1016/j.carbon.2022.06.043

IF: 10.9

2022-09-01

Carbon

Abstract:Antimony-based materials represent promising anode materials for sodium ion batteries (SIBs) owing to their high theoretical capacity, however, the large volume expansion and low ionic conductivity during the electrochemical process prohibit them from reaching their theoretical expectations. In this work, Sb2S3@C and Sb2Se3@C nanodots with uniform diameters of 19.0 nm and 20.7 nm were synthesized by H2/C thermal reduction and co-sulfurization (selenization) of sodium stibogluconate. Each Sb2S3 and Sb2Se3 nanodot was coated by an interconnecting carbon network with weak graphitization, which further crosslinked together to form a high conductive framework. When applied as anode for SIBs, they exhibited desired sodium storage properties, especially the excellent cycling stability of Sb2Se3@C nanodots with a reversible capacity of 316.1 mA h g−1 after 100 cycles at 100 mA g−1 and 269.1 mA h g−1 after 200 cycles at 1 A g−1, which was consistent with the calculated result of theoretical volume changes (264% and 246%) and density functional theory (DFT) calculation for both materials during the Na+ intercalation processes, as expected.

materials science, multidisciplinary,chemistry, physical
g-C3N4 confined Sb2Se3 as high-performance anode towards rapid and stable Na-ion storage

Xue-Zhong Li,Ya-Fei Guo,Shan Zhao,Peng-Fei Wang,Zong-Lin Liu,Jie Shu,Jun-Hong Zhang,Ting-Feng Yi

DOI: https://doi.org/10.1016/j.surfin.2024.104275

IF: 6.2

2024-05-01

Surfaces and Interfaces

Abstract:Sb2Se3 is considered a promising anode material for sodium-ion batteries (SIBs) due to its abundant reserves, low cost, and high theoretical capacity. Nevertheless, significant volume changes and slow electron transfer kinetics significantly limit its rate capability and cycle stability. In this work, we constructed g-C3N4-coated Sb2Se3 nanorods (Sb2Se3@g-C3N4) through the hydrothermal method and subsequent thermal treatment to enhance kinetics and achieve high cycle stability. The coating enhances the structure stability, insertion/extraction reversibility of Na+, and electrochemical reaction activity. Benefiting from the unique structure and composition, Sb2Se3@g-C3N4 (8 wt%) nanorod exhibits excellent rate properties with high desodiation capacities of 376.7, 345.5, 336.1, 322.7, 301.4, and 275.0 mAh g−1 at 0.1, 0.5, 1, 2, 5, and 10 A g−1, respectively. Even at 5 A g−1, Sb2Se3@g-C3N4 (8 wt%) exhibits high cycle stability with a capacity retention of approximately 86.7% after 600 cycles. Ex-situ XRD and XPS results confirm that the introduction of g-C3N4 on the surface of Sb2Se3 inhibits the volumetric expansion and electrode pulverization of Sb2Se3, thereby improving the structural stability of the composite material, resulting in an excellent electrochemical capability of Sb2Se3@g-C3N4 nanorods. Sb2Se3@g-C3N4 nanorods show massive potential as an anode material for the next-generation high-performance SIBs.

chemistry, physical,physics, applied, condensed matter,materials science, coatings & films

Novel Nitrogen-Doped Reduced Graphene Oxide-Bonded Sb Nanoparticles for Improvedsodium Storage Performance

Carbon-coated Graphene/antimony Composite with a Sandwich-Like Structure for Enhanced Sodium Storage

Nitrogen and sulfur co-doped mesoporous hollow carbon spheres for high rate sodium ion storage

Sulfur-/Nitrogen-Rich Albumen Derived "Self-Doping" Graphene for Sodium-Ion Storage.

Uniformly-distributed Sb nanoparticles in ionic liquid-derived nitrogen-enriched carbon for highly reversible sodium storage

Optimization of SbBix Nanoparticles Embedded in Ultra-Thin Carbon Networks for Enhanced Sodium/potassium Storage

2D Sandwich-Like Nanosheets of Ultrafine Sb Nanoparticles Anchored to Graphene for High-Efficiency Sodium Storage

Binding Sulfur-Doped Nb2O5 Hollow Nanospheres on Sulfur-Doped Graphene Networks for Highly Reversible Sodium Storage

A Flexible Sulfur-Enriched Nitrogen Doped Multichannel Hollow Carbon Nanofibers Film for High Performance Sodium Storage.

Bimetallic Copper Tin Sulfide Nanosheet Arrays Encapsulated in Nitrogen-Doped Carbon Shells for Boosted Sodium Storage Performance

Nanodot‐in‐Nanofiber Structured Carbon‐Confined Sb 2 Se 3 Crystallites for Fast and Durable Sodium Storage

Sodium‐Ion Batteries: Sb Nanoparticles Encapsulated in a Reticular Amorphous Carbon Network for Enhanced Sodium Storage (small 40/2015)

Confining MOF-derived SnSe nanoplatelets in nitrogen-doped graphene cages via direct CVD for durable sodium ion storage

Sb Nanoparticles Encapsulated in a Reticular Amorphous Carbon Network for Enhanced Sodium Storage

Design Nitrogen (N) and Sulfur (S) Co-Doped 3D Graphene Network Architectures for High-Performance Sodium Storage.

Low-surface-area Nitrogen Doped Carbon Nanomaterials for Advanced Sodium Ion Batteries.

Nano-size NiS Particles Anchored on Nitrogen-Doped Reduced Graphene Oxide for Superior Sodium Storage

Binding Nanosized Cobalt Chalcogenides in B,N‐Codoped Graphene for Enhanced Sodium Storage

Ultrafine Sb2S3@carbon-nanofibers for fast and stable sodium storage

Carbon skeleton confined Sb chalcogenides nanodots for stable sodium storage

g-C3N4 confined Sb2Se3 as high-performance anode towards rapid and stable Na-ion storage