Abstract:The enantiomeric ratio is a key factor affecting the crystallization behavior and morphology of poly-l-lactide/poly-d-lactide (PLLA/PDLA) blends. Despite a number of studies on crystallization of nonequimolar PLLA/PDLA blends, a full picture of the effect of the L/D ratio is still lacking. Here, we put the two enantiomers in contact and allow interdiffusion above the melting point of the stereocomplex crystal (SC) to prepare samples with a continuously changing L/D ratio from enantiopure PLLA (ratio 0/100) to enantiopure PDLA (100/0). Using polarized optical microscopy, atomic force microscopy, and microbeam X-ray diffraction, the continuous spectrum of morphologies and phase behaviors across the contact zone is investigated. The blend morphology shows clear evidence of "poisoning by purity" of SC crystallization at all blend compositions. The low birefringence of the 50/50 SC is found to be due to the meandering of broken edge-on lamellae. Its further decrease to near zero as L/D deviates further away from 50/50 is explained by transition from radial edge-on lamellae to fully random meandering lamellae, then to mixed flat-on lamellae, and finally to submicron-sized axialites. In comparison with the smooth and straight homocrystal (HC) lamellae of pure enantiomers, the lamellae in the blends often have serrated edges caused by pinning by rejected excess enantiomer acting as an impurity during lamellar growth. A feature of the binary phase diagram is pure enantiomers acting as an impurity to the SC and counter-enantiomer acting as an impurity to homocrystallization of the enantiomers. Crystallization was found to be most suppressed at 99% enantiomeric purity, where the amount of the counter-enantiomer is insufficient for creation of SC nuclei and HC growth is inhibited by the small amount of the enantio-impurity. These and other intriguing results are less likely to be noticed without the continuous composition gradient of the contact sample.

Stoichiometry and Packing Structure of Poly(lactic Acid) Stereocomplex As Revealed by Solid-State NMR and 13C Isotope Labeling.

Fractionated Crystallization Kinetics and Polymorphic Homocrystalline Structure of Poly(L-lactic Acid)/poly(d-Lactic Acid) Blends: Effect of Blend Ratio

Competing Stereocomplexation and Homocrystallization of Poly(l-lactic Acid)/poly(d-Lactic Acid) Racemic Mixture: Effects of Miscible Blending with Other Polymers

Blending Effects on Polymorphic Crystallization of Poly(l-lactide)

Structure and Morphology of Poly(lactic Acid) Stereocomplex Nanofiber Shish Kebabs.

Properties and morphology of poly(lactic acid)/soy protein isolate blends

Poly(L-Lactide)/Layered Double Hydroxides Nanocomposites: Preparation and Crystallization Behavior

Polymorphic Packing and Dynamics of Biodegradable Poly(3-Hydroxypropionate).

Molecular Structural Basis for Stereocomplex Formation of Polylactide Enantiomers in Dilute Solution

Stereocomplex-Driven Morphological Transition of Coil-Rod-Coil Poly(lactic Acid)-Based Cylindrical Nanoparticles

Stereochemical Heterogeneity of Biodegradable Poly(L-Lactide) Homopolymer As Revealed by Temperature Rising Elution Fractionation and Successive Self-Nucleation/Annealing Thermal Fractionation

Two-Stage Crystallization Kinetics and Morphological Evolution with Stereocomplex Crystallite-Induced Enhancement for Long-Chain Branched Polylactide/Poly(D-lactic Acid) Blends

Continuous Spectrum of Morphologies and Phase Behavior across the Contact Zone from Poly( l -lactide) to Poly( d -lactide): Stereocomplex, Homocrystal, and Between

Enhanced Crystallization Rate and Mechanical Properties of Poly(l‐lactic Acid) by Stereocomplexation with Four‐armed Poly(ϵ‐caprolactone)‐block‐poly(d‐lactic Acid) Diblock Copolymer

Enhanced stereocomplex formation of poly(L-lactic acid) and poly(D-lactic acid) in the presence of stereoblock poly(lactic acid)

Temperature-Variable FTIR and Solid-State 13C NMR Investigations on Crystalline Structure and Molecular Dynamics of Polymorphic Poly(l-lactide) and Poly(l-lactide)/Poly(d-lactide) Stereocomplex

Formation of Stereocomplex Crystal and Its Effect on the Morphology and Property of PDLA/PLLA Blends

Stereocomplex formation of a poly(D-lactide)/poly(L-lactide) blend on a technical scale

Unique Crystallization Behavior of Poly(l-Lactide)/poly(d-lactide) Stereocomplex Depending on Initial Melt States

Nanostructures of Stereocomplex Polylactide in Poly[l-lactide] Doped with Poly[d-lactide]

Controllable formation of unusual homocrystals in poly( L -lactic acid)/poly( D -lactic acid) asymmetric blends induced by the constraining effects of pre-existing stereocomplexes