Abstract:The enantiomeric ratio is a key factor affecting the crystallization behavior and morphology of poly-l-lactide/poly-d-lactide (PLLA/PDLA) blends. Despite a number of studies on crystallization of nonequimolar PLLA/PDLA blends, a full picture of the effect of the L/D ratio is still lacking. Here, we put the two enantiomers in contact and allow interdiffusion above the melting point of the stereocomplex crystal (SC) to prepare samples with a continuously changing L/D ratio from enantiopure PLLA (ratio 0/100) to enantiopure PDLA (100/0). Using polarized optical microscopy, atomic force microscopy, and microbeam X-ray diffraction, the continuous spectrum of morphologies and phase behaviors across the contact zone is investigated. The blend morphology shows clear evidence of "poisoning by purity" of SC crystallization at all blend compositions. The low birefringence of the 50/50 SC is found to be due to the meandering of broken edge-on lamellae. Its further decrease to near zero as L/D deviates further away from 50/50 is explained by transition from radial edge-on lamellae to fully random meandering lamellae, then to mixed flat-on lamellae, and finally to submicron-sized axialites. In comparison with the smooth and straight homocrystal (HC) lamellae of pure enantiomers, the lamellae in the blends often have serrated edges caused by pinning by rejected excess enantiomer acting as an impurity during lamellar growth. A feature of the binary phase diagram is pure enantiomers acting as an impurity to the SC and counter-enantiomer acting as an impurity to homocrystallization of the enantiomers. Crystallization was found to be most suppressed at 99% enantiomeric purity, where the amount of the counter-enantiomer is insufficient for creation of SC nuclei and HC growth is inhibited by the small amount of the enantio-impurity. These and other intriguing results are less likely to be noticed without the continuous composition gradient of the contact sample.

Stereochemical Heterogeneity of Biodegradable Poly(L-Lactide) Homopolymer As Revealed by Temperature Rising Elution Fractionation and Successive Self-Nucleation/Annealing Thermal Fractionation

Characterization on the Chain Heterogeneity of L-Lactide and Epsilon-Caprolactone Copolymers

Fractionated Crystallization Kinetics and Polymorphic Homocrystalline Structure of Poly(L-lactic Acid)/poly(d-Lactic Acid) Blends: Effect of Blend Ratio

Blending Effects on Polymorphic Crystallization of Poly(l-lactide)

Competing Stereocomplexation and Homocrystallization of Poly(l-lactic Acid)/poly(d-Lactic Acid) Racemic Mixture: Effects of Miscible Blending with Other Polymers

Polymorphous Crystallization And Multiple Melting Behavior Of Poly(L-Lactide): Molecular Weight Dependence

Study on molecular chain heterogeneity of linear low-density polyethylene by cross-fractionation of temperature rising elution fractionation and successive self-nucleation/annealing thermal fractionation

Stereochemical Heterogeneity Analysis of Polylactides by Multidimensional Liquid Chromatography

Temperature-dependent Polymorphic Crystallization of Poly(l-Lactide)s on the Basis of Optical Purity and Microstructure

Thermal and Phase-Separation Behavior of Injection-Molded Poly(L-Lactic Acid)/Poly(D-Lactic Acid) Blends with Moderate Optical Purity

Preparation, mechanical, and thermal properties of biodegradable polyesters/poly(lactic acid) blends

Investigation of Poly(lactide) Stereocomplexation Between Linear Poly(l‐lactide) and PDLA‐PEG‐PDLA Tri‐block Copolymer

Unique Crystallization Behavior of Poly(l-Lactide)/poly(d-lactide) Stereocomplex Depending on Initial Melt States

Microstructure and Mechanism Study of Polylactide Obtained by the Copolymerization of L‐lactide and D,L‐lactide

Unique Homo-Crystallization and Melting Behavior of Poly(L-lactic Acid): Influence of Stereocomplex with Varied Structure

Characterization of the Mechanical Properties, Crystallization, and Enzymatic Degradation Behavior of Poly(butylene Succinate-Co-ethyleneoxide-co-dl-lactide) Copolyesters

An Investigation of the Synthesis and Thermal-Stability of Poly(Dl-Lactide)

Continuous Spectrum of Morphologies and Phase Behavior across the Contact Zone from Poly( l -lactide) to Poly( d -lactide): Stereocomplex, Homocrystal, and Between

Synthesis and Characterization of Poly(propylene oxide-lactide) Diblock Copolymer

The effect of chemical composition on the degradation kinetics of high molecular weight poly(trimethylene carbonate-co-L-lactide)

Comparing the Structural, Thermal, and Rheological Properties of Poly( meso -lactide) to Poly( l -lactide) and Poly( rac -lactide)