Abstract:The compressive mechanical properties of concrete-based materials are strongly affected by the presence of additions in the mix and load application velocity. Fiber-Reinforced Rubberized Concrete (FRRC) was recently proposed in the literature as a concrete-based material with the aim of obtaining a ductile material with reduced environmental burden and characterized by excellent energy absorption performances during impact loading. FRRC joins and balances the advantages and drawbacks of Fiber Reinforce Concrete (FRC) and Rubberized Concrete (RuC). However, its behavior has rarely been investigated under dynamic loadings, although gaining sufficient knowledge on their high strain rate behavior is crucial for their full-scale application. This study aims to investigate the high-strain rate compressive behavior of FRRC with fine rubber aggregates and micro-straight steel fibers. Tests were performed using conventional quasi-static loading with a compressive testing machine and high-strain rate tests with a 080-mm Split Hopkinson Pressure Bar (SHPB) for strain rates up to 200 s(-1). The experimental program comprises the characterization of Plain Concrete (PC), FRC, RuC, and FRRC with a full test matrix (a total of 192 specimens) covering fiber contents up to 1.5% and rubber volume substitution ratios up to 30%. The micro-scale characterization of the material using SEM scans provided a complete understanding of the observed macro-scale behavior. A high-speed camera was used to capture the cracking development processes. The measurements both for quasi-static and dynamic tests indicate that the addition of fibers improves the ductility or toughness with a slight increase in the compressive strength and the substitution with rubber aggregates significantly reduces the compressive strength with improved ductility or toughness. The combination of fiber and rubber (FRRC) leads to a combination of the previously described single marginal effects. The dynamic tests reveal the marked strain rate dependency, although specimens with large rubber volume substitution were more sensitive to the strain rate effect within the considered test range. Based on the test data, data-driven models for strength reduction factor (SRF) and dynamic increase factor (DIF) are proposed for different types of FRRC. The image-based waveform discussion provides evidence of the "double-peak" phenomenon highlighting the different features of the observed signals and damage evolution. Ultimately, this study indicates that FRRC has an excellent high-strain rate compressive behavior and can be a promising material to be employed to protect structures against impact and blast loads.

Experimental investigation on static and dynamic mechanical properties of steel fiber reinforced ultra-high-strength concretes

The Research of Layer Steel Fiber Reinforced Concrete on Mecha-Nical Properties and Fracture Performance

High-strain rate compressive behavior of Fiber-Reinforced Rubberized Concrete

Experimental Studies on Concrete Filled Steel Tubes under High Strain Rate Loading

Investigation of basic properties, microscopic characteristics, and optimized ratio prediction model of ultra-high steel fiber reinforced concrete

Experimental Study of Dynamic Tensile Strength of Steel-Fiber-Reinforced Self-Compacting Concrete Using Modified Hopkinson Bar

Comparative study on effects of steel fiber and imitation steel fiber on dynamic tensile properties of ultra-high-performance cementitious composites

Research on the Fracture Behavior of Steel-Fiber-Reinforced High-Strength Concrete

Experimental Study On Flexural Fatigue Property Of Ultra-High Toughness Cementitious Composites

High-flowable and High-Performance Steel Fiber Reinforced Concrete Adapted by Fly Ash and Silica Fume

Experimental and Numerical Investigations on the Seismic Performance of High-Strength Exterior Beam-Column Joints with Steel Fibers

Study on the Dynamic Fracture Mechanical Properties of Ultra High-Performance Concrete under the Influence of Steel Fiber Content

Durability and Compression Properties of High-Strength Concrete Reinforced with Steel Fibre and Multi-walled Carbon Nanotube

Investigation on Mechanical and Microstructure Properties of Steel Fiber Reinforced Concrete

Experimental study of reinforced concrete beams reinforced with hybrid spiral-hooked end steel fibres under static and impact loads

Effects of Steel Fiber and Specimen Geometric Dimensions on the Mechanical Properties of Ultra-High-Performance Concrete

Study on dynamic properties of lightweight ultra-high performance concrete (L-UHPC)

Mechanical performance and numerical simulation of high-performance steel fiber reinforced concrete

Experiment on mechanical properties of steel fiber reinforced concrete and application in deep underground engineering

Multiscale investigation on tensile properties of ultra-high performance concrete with silane coupling agent modified steel fibers

Effect of different steel fiber types on mechanical properties of ultra-high performance concrete