Abstract:Corrosion of steel structures in reinforced concrete structures in coastal areas has long been an urgent concern. In this study, a combined corrosion inhibitor, consisting of benzotriazole (BTA) and sodium D-gluconate (SD), was loaded onto halloysite nanotubes (HNTs) using the vacuum negative pressure method. Then, the HNTs were encapsulated with biomass polyelectrolytes sodium alginate (SA) and chitosan (CS) by layer-by-layer self-assembly technique to prepare BTA/SD-HNTs@CS/SA (FHNTs) composite. Furtherly, a functional epoxy coating (FEP) with pH-responsive and long-term service ability was successfully fabricated. It is found that BTA/SD was released in large quantities under alkaline (pH = 11) and acidic (pH = 2) conditions, while essentially no release under neutral condition. The electrochemical impedance spectroscopy (EIS) measurements demonstrate that the corrosion protection ability of FEP was significantly stronger than pure epoxy coating (EP), and the addition of 2 % FHNTs having the most excellent anticorrosion performance with the maximum charge transfer resistance ( R ct ) value (4.8 × 10 6 Ω cm 2 ) after 4 weeks of immersion, which was 2 orders of magnitude greater than the pure EP coating. Particularly, molecular dynamics (MD) simulations indicate that FEP coating has better barrier properties than EP, while the fractional free volume (FFV) value of H 2 O and Cl − in EP was 9.1 % and 5.1 %, respectively, whereas this value decreased by about 15 % to 7.7 % and 4.4 % in FEP. The results of density functional theory (DFT) calculations suggest that the released BTA and SD molecules have a synergistic adsorption effect on the surface, which can form a compact film to hinder the invasion of corrosive species. Overall, this study provides new insights for developing smart pH-responsive and superior anticorrosion coatings.

A Novel Acid-Responsive HNTs-based Corrosion Inhibitor for Protection of Carbon Steel

Synthesis and inhibition behavior of acid stimuli-responsive Ca-Na2MoO4-HNTs nanocomposite

Preparation, release and anticorrosion behavior of a multi-corrosion inhibitors-halloysite nanocomposite

Nano-Scaled And Aggregated Films To Protect Carbon Steel From Corrosion In Hydrochloric Acid

Corrosion Protection of N80 Steel in Hydrochloric Acid Medium Using Mixed C15H15NO and Na2WO4 Inhibitors

Synthesis, Characterization and Investigation of Anticorrosion Properties of an Innovative Metal–Organic Framework, ZnMOF-BTA, on Carbon Steel in HCl Solution

The new insights towards smart pH-responsive anticorrosion coating based on HNTs carrying synergistic inhibitors: Experimental and molecular simulation

Halogen-Free Functional Quaternary Ammonium-Based Ionic Liquid As an Ecofriendly Corrosion Inhibitor for Q235 Steel in Acids.

Effect of Inhibitor-Loaded Halloysite Nanotubes on Active Corrosion Protection of Polybenzoxazine Coatings on Mild Steel

N-substituted Methyl Ethylenediamine Derivatives As Corrosion Inhibitors for Carbon Steel in 1 M Hydrochloride Acid

Corrosion Inhibition of Carbon Steel in Tetra-N-butylammonium Bromide Aqueous Solution by Benzotriazole and Na3PO4

Inhibitor loaded functional HNTs modified coatings towards corrosion protection in reinforced concrete environment

Functionalized Carbon Nanotubes As A Novel Inhibitor To Enhance The Anticorrosion Performance Of Carbon Steel In Co2-Saturated Nacl Solution

Benzalkonium chloride/titanium dioxide as an effective corrosion inhibitor for carbon steel in a sulfuric acid solution

Synthesis of polyaniline tannate-modified carbon nanotubes by oxidative copolymerization as highly efficient corrosion inhibitors for mild steel in HCl solution

pH-Responsive nanovalves based on encapsulated halloysite for the controlled release of a corrosion inhibitor in epoxy coating

Organic Functionalized Nano-Fe3O4 Hybrid Inhibitor for Enhancing the Anticorrosion Performance of Carbon Steel

Experimental and Computational Investigations on the Synergistic Inhibition Mechanism of Biphenyl Quinoline Quaternary Ammonium and Hexamethylenetetramine on the Corrosion of J55 Steel in 20 Wt.% HCl Solution

Experimental and molecular modeling studies of multi-active tetrazole derivative bearing sulfur linker for protecting steel from corrosion

Corrosion Inhibition of N80 Steel Using Novel Diquaternary Ammonium Salts in 15% Hydrochloric Acid

Electrochemical, Surface Analysis, and Theoretical Investigation of 3-Hydroxy-5-(phenylamino)-4-(p-tolyldiazenyl)thiophen-2-yl)(phenyl)methanone As a Corrosion Inhibitor for Carbon Steel in a Molar Hydrochloric Acid Solution