Abstract:Substitution of Zn with Mg has been reported to suppress CuZn defects, which can improve the photoelectric performance of Cu2ZnSn(S,Se)4 (CZTSSe) photovoltaic devices. In our work, the electrical property enhancement of an absorbing layer can be found by incorporating Mg content into the as-prepared precursor solution, forming an alloyed Cu2MgxZn1-xSn(S,Se)4 (CMZTSSe) phase and increasing the photoelectric performance of devices. By adjusting the doping ratio of Mg, we systemically study the impact of Mg content on the crystal structure, thickness, and electrical properties of the Cu2MgxZn1-xSn(S,Se)4 absorbing layer. Also, the photoelectric performance of Cu2MgxZn1-xSn(S,Se)4 solar cells have a large improvement, and the optimal photoelectric conversion efficiency (PCE) of 7.76% for devices is obtained. Our results offer the finding that Mg doping can optimize the electrical properties of Cu2ZnSn(S,Se)4 photovoltaic devices.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.0c02121?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.0c02121</a>.ICP-OES results of Cu2MgxZn1-xSn(S,Se)4 thin films, XPS spectra of Cu2Mg0.0714Zn0.9286Sn(S,Se)4 thin films, Raman spectra, surface roughness values, average surface current values, I–V curves, and diffuse reflection spectra of Cu2MgxZn1-xSn(S,Se)4 thin films (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.0c02121/suppl_file/ae0c02121_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Synthesis and Investigation of Environmental Protection and Earth-Abundant Kesterite Cu2MgxZn1-xSn(S,Se)4 Thin Films for Solar Cells

Formation of Alloyed Cu2CoxZn1-xSn(S,Se)4 Absorption Layer and Its Application in Solar Cells.

Formation of Alloyed Cu2Cox Zn1-x Sn(S,Se)4 Absorption Layer and Its Application in Solar Cells

Cu2 ZnSn(S1-x Se x )4 thin film solar cells prepared by water-based solution process

Investigation of Optimum Mg Doping Content and Annealing Parameters of Cu2MgxZn1−xSnS4 Thin Films for Solar Cells

The Effect of the Zn/Sn Ratio on the Formation of Single Phase Kesterite Cu2ZnSnS4 Solar Cell Material

Investigation on the Selenization Treatment of Kesterite Cu2Mg0.2Zn0.8Sn(S,Se)4 Films for Solar Cell

Bandgap Engineering of Cu2InxZn1−xSn(S,Se)4 Alloy Films for Photovoltaic Applications

Enhancing the Performance of Aqueous Solution-Processed Cu<sub>2</sub>ZnSn(S,Se)<sub>4</sub>Photovoltaic Materials by Mn<SUP>2+</SUP>Substitution

Enhancing the Performance of Aqueous Solution-Processed Cu2ZnSn(S,Se)4 Photovoltaic Materials by Mn2+ Substitution.

Enhancing the Performance of Aqueous Solution-Processed Cu<sub>2</sub>ZnSn(S,Se)<sub>4</sub> Photovoltaic Materials by Mn<sup>2+</sup> Substitution

Synthesis of Simple, Low Cost and Benign Sol-Gel Cu2InxZn1-xSnS4 Alloy Thin Films: Influence of Different Rapid Thermal Annealing Conditions and Their Photovoltaic Solar Cells

Kesterite Cu2znsn(S,Se)(4) Solar Cells with Beyond 8% Efficiency by A Sol Gel and Selenization Process

Indium Effect on Structural, Optical and Electrical Properties of Cu 2 in X Zn 1-X SnS 4 Alloy Thin Films for Solar Cell

Boosting the Electrical Properties of Cu 2 ZnSn(S,Se) 4 Solar Cells via Low Amounts of Mg Substituting Zn

Influence of the Selenization Time on the Properties of (na0.1cu0.9)2znsn(s,se)4 Thin Films and Their Photovoltaic Solar Cells

Realization of 11.5% Efficiency Cu2ZnSn(S,Se)4 Thin‐Film Solar Cells by Manipulating the Phase Structure of Precursor Films

Improving the performance of low-cost water-based solution-synthesised Cu2ZnSn1-Ge (S,Se)4 absorber thin films by germanium doping

Path Towards High-Efficient Kesterite Solar Cells

Kesterite Cu2ZnSnS4 thin film solar cells by a facile DMF-based solution coating process

Sol-gel synthesis of Cu2ZnSnS4 thin films under mild conditions