Abstract:The Euler–Lagrange method is a great way for multiphase bubble flow simulation, the detailed information of bubbles can be effortlessly obtained, and it is helpful for the efficiency and safety of different industry processes. Traditionally, the computational fluid dynamics-discrete bubble model (CFD-DBM) method has always been used to simulate this flow process. Nevertheless, the ability of the traditional CFD-DBM method is significantly limited in terms of the size ratio between the grid and bubble, where the grid size must be larger than the bubble size. In reality, the bubble may be larger than the grid and the grid/bubble size ratio can be very large due to the effects of complex bubble dynamics (such as the bubble breakup and coalescence) and complex internal flows. To address this issue, an improved CFD-DBM method is proposed in this study, which can be used for the simulation with a wide grid/bubble size ratio in gas–liquid–bubble multiphase simulation, and the volume of fluid (VOF) method is applied to capture the interface between gas and liquid phases. A gradient-based interpolation method is employed to reconstruct the liquid velocity around the target bubble when the grid size is much larger than the bubble size. If the bubble size is comparable with or larger than the grid size, the interphase force correction and the field smoothing will be carried out within a spherical support area. Subsequently, the proposed model is validated by the comparison with a bubble column experiment, in terms of the bubble size distribution and bubble vertical velocity. The results demonstrate the high accuracy of the new method. Finally, the influence of different parameters including normal spring stiffness, critical Weber number, and the range of the spherical support area on the bubble flow is investigated.

A PBM-CFD Model with Optimized PBM-Customized Drag Equations for Chemisorption of CO2 in a Bubble Column

CFD Simulation of Gas-Liquid Flow in Bubble Column with Two-bubble Phase Population Balance Model

CFD Simulation for Up Flow Jet-Loop Reactors by Use of Bi-Dispersed Bubble Model

Experimental and Numerical Investigations of Scale-Up Effects on the Hydrodynamics of Slurry Bubble Columns

Modelling of Mass Transfer for Gas-Liquid Two-Phase Flow in Bubble Column Reactor with a Bubble Breakage Model Considering Bubble-Induced Turbulence

Evolution and Interaction Characteristics of Liquid Flow and Bubbles in a Jet Bubbling Column

CFD Simulation of Gas-Liquid Flow in Bubble Column

CFD-PBM Approach with Modified Drag Model for the Gas–liquid Flow in a Bubble Column

Influence of Grid and Numerical Schemes on Bubble Column Simulation with TBPBM-CFD Model

Simulation of Bubble Column Reactors Using CFD Coupled with a Population Balance Model

A CFD-PBM coupled model for gas-liquid flows

CFD modeling of reactive absorption of CO2 in aqueous NaOH in a rectangular bubble column: Comparison of mass transfer and enhancement factor model

Euler-Euler modeling of reactive bubbly flow in a bubble column

CFD-PBM Simulations of a Bubble Column with Different Liquid Properties

Drag Force of Bubble Swarms and Numerical Simulations of a Bubble Column with a CFD-PBM Coupled Model

CFD-PBM Simulation of Bubble Columns: Effect of Parameters in the Class Method for Solving PBEs

Numerical modeling of reactive bubbly flows based on Euler-Lagrange approach

Numerical simulation of the bubble column at elevated pressure with a CFD-PBM coupled model

Modeling of Mass Transfer Characteristics of Bubble Column Reactor with Surfactant Present

CFD-PBM Approach with Different Inlet Locations for the Gas-Liquid Flow in a Laboratory-Scale Bubble Column with Activated Sludge/Water.

An Improved Computational Fluid Dynamics-Discrete Bubble Model for Multiphase Bubble Flow Simulation with a Wide Grid/bubble Size Ratio