Abstract:Visible light communication (VLC) has been emerged as a complementary promising technology to its radio-frequency (RF) counterpart due to its considerable merits, such as safety to human beings, wide spectrum without license and non-interference to RF communication. In VLC, white LEDs, consisting of red-green-blue (RGB) and phosphor-converted LEDs, are usually utilized to facilitate both data transmission and illumination, where RGB LEDs are preferred to support higher data rate communications. In RGB LEDs, the mixing ratio of the red, green and blue lights is flexible in the chromaticity diagram. As long as the alternation of mixing ratio lies in a MacAdam ellipse or the speed of the alternation is fast enough, the variations of emitted white light cannot be perceived by human beings. Therefore, additional information can be carried by different mixing ratio and index modulation technique is introduced firstly in RGB-LED-based VLC wireless systems in order to enhance either spectral or energy efficiency. Different from the state-of-the-art methods, the index modulation is performed in the chromaticity domain rather than the traditional frequency, spatial and time domains, which provides a new perspective of index modulation. More specifically, in the proposed chromaticity-domain index modulation (CD-IM) with white RGB LEDs, the input bits are divided into subblocks, including index bits and data bits. The index bits are used to select different mixing ratio, which are corresponding to different direct current (DC) bias of RGB channels. The data bits are further split into three parts for the pulse amplitude modulation (PAM) on each color channel independently. The generated individual alternating current (AC) is then added to its corresponding DC current of each color channel. Since DC and AC currents could convey the information concurrently, the spectral efficiency could be improved considerably. At the receiver, a maximum likelihood (ML) detector is employed to detect the index bits as well as the data bits on the RGB channels simultaneously. Simulation results illustrate that our proposed CD-IM achieves better BER performance in comparison with its traditional color shift keying (CSK) and PAM counterparts under the same spectral efficiency.

Experimental Study and Application of Response Mask Invariant Characteristic for Generalized Visible Light Communication Channel

A Novel Visible Light Communication Channel Compensation and Reconstruction Algorithm for Linear Decomposed CPM Signals

Channel Characterization of IRS-Based Visible Light Communication Systems

Experimental Characterization Of Indoor Visible Light Communication Channels

Channel Characterization For Multi-Color Vlc For Feedback And Beamforming Design

Channel Modeling and Signal Processing for Array-based Visible Light Communication System in Misalignment

Enhanced Performance of Single-Input Multiple-Output Visible Light Communication System Utilizing Space Diversity Technology

Experimental Investigation of 16.6 Gbps SDM-WDM Visible Light Communication Based on a Neural Network Receiver and Tricolor Mini-Leds.

Channel Characteristics and Link Adaption for Visible Light Communication in an Industrial Scenario

Application of Digital Signal Processing in High Speed Visible Light Communication System

Uber-In-Light: Unobtrusive Visible Light Communication Leveraging Complementary Color Channel

QoS Analysis and Signal Characteristics for Short-Range Visible-Light Communications

Channel Aware Spatial Constellation Design in VLC MIMO Communication Systems

Design and experiments of an adaptive OFDM system for visible light communication

Adaptive Spatial Modulation for Indoor Visible Light Communications

Chromaticity-domain Index Modulation for Visible Light Communication

A Novel 3D Non-Stationary Channel Model for 6G Indoor Visible Light Communication Systems

Enhanced Performance of Spatial Modulation with Angular Diversity Receiver for Indoor Visible Light Communication.

Turbulence Channel Modeling of Visible Light Communication under Strong Background Noise and Diversity Receiving Technologies

Modelling Noise and Pulse Width Modulation Interference in Indoor Visible Light Communication Channels

LED Based High-Speed Visible Light Communications