Abstract:An analytical model is developed to predict the impact characteristic parameters of composite cylindrical shells when low-velocity penetration and non-penetration damage are considered. The critical impact velocity criterion for judging the penetrating failure of such structures is also proposed. The impact contact force, displacement, and load-displacement curve of the structure subjected to oblique non-penetrating impact loading are solved using the improved Hertz contact theory, cumulative damage theory, stiffness degradation method, etc. Based on the formula derivation of critical impact velocity, the key impact parameters are solved, such as the residual velocity of the projectile and damage area of the structure with penetrating impact, which takes into account three energy absorption mechanisms, such as delamination, laminating crushing and linear momentum transfer. A series of non-penetrating and penetrating impact tests are conducted using a low-velocity drop hammer rig and a light gas gun. The prediction results of the proposed model are compared to both experimental and literature results. One can find out that the largest prediction errors of the peaks of impact contact force and displacement deformation are 12.3 and 9.2 %, respectively, and the counterparts of residual velocity and damage area are 12.0 and 6.2 %, respectively. Hence, the present model is trustworthy for predicting these impact parameters. Moreover, it is advised to adopt an appropriate stacking sequence, a high ratio of structural thickness to radius, a large oblique impact angle of the projectile, and a small mass ratio of the projectile to such a structure to enhance its impact resistance or reduce impact response. In addition, it is worth noting that the current model probably has a big prediction error of the high-velocity impact behaviors involving the material heating and soft effects caused by penetration damage since high strain rate and temperature effects are not considered.

A simplified approximate model of compressible hypervelocity penetration

The Effects of Compressibility and Strength on Penetration of Long Rod and Jet

Strain-rate-dependent Cohesive Zone Modelling of Charge Damage Behavior when a Projectile Penetrates Multilayered Targets

Application of simplified threeGequation transition model in hypersonic flow

Oblique penetration of tungsten spheres against steel targets based on compressible and incompressible cavity expansion theory

Analytical modeling and analysis of the low-velocity penetration and non-penetration behaviors of fiber-reinforced composite cylindrical shells based on critical impact velocity criterion

Study on the Dimensionless Model of High-Speed Penetration Efficiency

Hypervelocity penetration of concrete targets with long-rod steel projectiles: experimental and theoretical analysis

Numerical investigation on jet penetration capacity of hypervelocity shaped charge in underwater explosion

Analysis of the velocity relationship and deceleration of long-rod penetration

Investigation on the penetration of jacketed rods with striking velocities of 0.9–3.3 km/s into semi-infinite targets

Oblique penetration law of short-rod projectile into thin metal target

Approximate theory of armour perforation by ductile hole expansion

Compressibility effects on cavity dynamics and shock waves in high-speed water entry

PENETRATION OF CONCRETE TARGETS USING A MODIFIED HOLMQUIST–JOHNSON–COOK MATERIAL MODEL

Influence of the Movement of Cylindrical Target Plate on the Penetrating Ability of Kinetic Energy Projectile

Material point method and application to impact and penetration

Meso-mechanical Model of Concrete under a Penetration Load

Mechanism of Evolution of Shock Wave of Muzzle Jet under Initial Interference and Its Simplified Model

Predicting the Damage on a Target Plate Produced by Hypervelocity Impact Using a Decoupled Finite Particle Method

Constraining Damage Size and Crater Depth: A Physical Model of Transient Crater Formation in Rocky Targets