Abstract:Water-filled double hulls are a prevalent design for underwater warships. Studying the propagation of underwater shock wave in such structures is essential to comprehend their shock resistance. The aim of this paper is to investigate the propagation of underwater shock wave and water cavitation in a water-filled double plate. To achieve this objective, the paper establishes a Eulerian compressible fluid model that combines the isentropic single fluid model and Newton's second law. The accuracy of the numerical solver is confirmed through validation tests. The reflection and transmission characteristics of shock wave, the dynamic response of the plate, and the cavitation in external and gap water are analyzed. It also examines the effects of the supporting springs of outer and inner plates and the area density of the outer plate on the shock wave propagation and cavitation evolution. The findings indicate that the transmitted wave in the gap water is influenced by the area density and supporting spring of the outer plate. A thicker outer plate can reduce the peak value of the transmitted wave, and a stiffer supporting spring can decrease the transmitted impulse. On the other hand, if the outer plate is freestanding or softly supported, it has minimal effects on the response of the inner plate. Moreover, the water cavitation is determined by the supporting spring of the inner plate in the case of a softly supported outer plate, and the cavitation initially develops in the gap water near the inner plate before expanding towards the external water. When the supporting spring of the outer plate is stiff, it significantly reduces the occurrence of cavitation in the external water, while the cavitation in the gap water is still determined by the support spring of the inner plate. These research findings are valuable for analyzing the shock resistance of typical double-hull submarines.

Compressibility effects on cavity dynamics and shock waves in high-speed water entry

Computational analysis of compressibility effects on cavity dynamics in high-speed water-entry

Multiphase Flow Simulation of Water Entry of a Structure with Complex Geometry Using a Three-Dimensional Parallel Compressible Model

Numerical study on the cavity dynamics of water entry and exit for a high-speed projectile crossing a wave

Experimental Study on the Cavity Dynamics in High-Speed Oblique Water-Entry

Numerical investigation of water entry characteristics of a projectile in the wave environment

Numerical simulation for high speed oblique water entry of different density projectiles

An investigation into container constraint effects on the cavity characteristics due to high-speed projectile water entry

Evaluation of the Cavitation Fluid Characteristics of the Bullet across the Medium into the Water at Different Velocities

Numerical simulation of subsonic and transonic water entry with compressibility effect considered

Study on high-speed water entry of the projectile passing through an ice hole in a low-temperature environment based on a modified thermodynamic cavitation model

Experimental Investigations on Behaviors of Projectile High-Speed Water Entry

Numerical Study of Flat Plate Impact on Water Using a Compressible CIP–IBM–Based Model

Numerical simulations of series and parallel water entry of supersonic projectiles in compressible flow

Numerical Simulation of High-Speed Water-Entry Cavity of Cone Cylinder

Numerical study of hydrodynamic loads at early stage of vertical high-speed water entry of an axisymmetric blunt body

Free surface and near-wall effects on the cloud cavitating flow over an axisymmetric projectile

A Model for Water-Entry Projectile with an Open Cavity

Numerical Investigation on the Regime of Cavitation Shedding and Collapse During the Water-Exit of Submerged Projectile

Numerical Simulation of Vertical High-Speed Water Entry Process of Projectiles with Different Heads

Investigation of Shock Wave Propagation and Water Cavitation in a Water-filled Double Plate Subjected to Underwater blast