Abstract:Current lithium-ion batteries consist of a graphite anode and a metal oxide cathode. Due to their relatively high energy density and rechargeability, they have enabled various applications over the past few decades. However, significant improvements to battery cost, performance, and safety for applications such as vehicle electrification require a shift to next-generation materials, such as silicon as an anode which offers higher capacity, as well as solid-state electrolytes (SSEs) which are non-flammable. Both of these technologies currently suffer challenges which have prevented their widespread adoption. Silicon suffers low conductivity, and large volume change on each cycle, subsequently causing loss in electrical contact and the formation of an unstable solid electrolyte interface (SEI) each cycle. This project aims to solve these challenges by wrapping silicon nanoparticles and a sacrificial spacing material with crumpled graphene sheets using a scalable, spray drying method, and coupling it with a solid electrolyte. The graphene shell provides electrical contact with the silicon and space for its expansion during lithiation. The solid electrolyte provides a safer alternative to liquid electrolytes, and further reduces the SEI formation which, with a liquid electrolyte, can leak into such crumpled structures. In this work we will present our initial results concerning how the spacing material affects the structure and how the overall structure can be modified by spray drying parameters to determine optimal conditions for capacity and cycle-life using, first, at typical, organic carbonate-based electrolyte. We will explore different spacing material candidates such as chitosan which, upon heat treatment of the sample, would not only provide space for the expansion of silicon, but the residual nitrogen-doped carbon would also act as a conductive filler inside the crumpled structure. Furthermore, we will investigate various binder systems and their impact on cycle-stability including polyvinylidene fluoride (PVDF), polyacrylic acid (PAA), sodium alginate (SA), and cross-linked SA. Based on preliminary, both PAA and SA are shown to have improved performance compared to PVDF as well as higher cycle life, however, SA forms smoother, thinner electrode films. Cross-linked SA is also shown to increase the cycling life and decrease the capacity loss per cycle. We then explore powder mixing and solution infiltration methods to introduce high conductivity SSEs and their performance when coupled to the graphene-wrapped silicon anode structures.

Preparation of Si-graphite Dual-Ion Batteries by Tailoring the Voltage Window of Pretreated Si-anodes

Anionic Aggregates Induced Interphase Chemistry Regulation Toward Wide-Temperature Silicon-Based Batteries

Simultaneously Manipulating Carbon Coating Layers and Void Structures in Silicon/Carbon Anode Materials Via Bifunctional Templates for Lithium-Ion Batteries

Organic salts with unsaturated bond and diverse anions as substrates for solid electrolyte interphase on graphite anodes

Multi-strategy Synergistic In-Situ Constructed Gel Electrolyte-Binder System for High-Performance Lithium-Ion Batteries with Si-based Anode

A Hybrid Electrolytes Design for Capacity‐Equivalent Dual‐Graphite Battery with Superior Long‐Term Cycle Life

Promising Cell Configuration for Next-Generation Energy Storage: Li2S/Graphite Battery Enabled by a Solvate Ionic Liquid Electrolyte.

Graphene-Wrapped Silicon Nanoparticles for All-Solid-State Lithium-Ion Batteries

Preactivation Strategy for a Wide Temperature Range in Situ Gel Electrolyte-Based LiNi0.5Co0.2Mn0.3O2∥Si-Graphite Battery.

Simple Designed Micro–Nano Si–Graphite Hybrids for Lithium Storage

Dual carbon boosts silicon-based anodes for excellent initial coulombic efficiency and cycling stability of lithium-ion batteries

Scalable Synthesis of Carbon Stabilized Sio/Graphite Sheets Composite As Anode for High-Performance Li Ion Batteries

Cost-Effective Milled Silicon and Exfoliated Graphene Anode for High-Performance Li-Ion Batteries

Diverting Exploration of Silicon Anode into Practical Way: A Review Focused on Silicon-Graphite Composite for Lithium Ion Batteries

A scalable silicon/graphite anode with high silicon content for high-energy lithium-ion batteries

Optimizations of Graphitic Carbon/Silicon Hybrids for Scalable Preparation with High-Performance Lithium-Ion Storage

Facile preparation of silicon/carbon composite with porous architecture for advanced lithium-ion battery anode

Dual immobilization of porous Si by graphene supported anatase TiO 2 /carbon for high-performance and safe lithium storage

Dual Immobilization of Porous Si by Graphene Supported Anatase TiO2/carbon for High-Performance and Safe Lithium Storage

3D binder-free nanoarchitecture design of porous silicon/graphene fibers for ultrastable lithium storage

Double-shell interphase design enabling suppressed side reactions for stable Si battery anode