Abstract:Defect-free Mg-10Gd alloy welded joints with high tensile strength were obtained via electron beam weld. The microstructure of joints under different heat inputs was inconsistent. Sharp grain refinement occurred in the fusion zone due to the combination of the molten pool fluctuation and alloying elements. The divorced eutectic structures produced at grain boundary during grain growth and secondary Mg5Gd(beta II) located in the crystal were observed by transmission electron microscope. In the as-weld joint subjected to different heat-input, the fusion zone kept high strength while softening occurred in the heat-affected zone, which led the joint to fracture at the heat affected zone or base metal. With the triaxial tensile stress induced by the fusion zone, the mechanism of hindering effect of dislocation movement turned from the pining function of precipitates into a fixing effect from the triaxial tensile stress. The ultimate tensile strength of as-weld joints exceeded 93% of base metal. The tensile tests suggested that under the temperature below 200 C, the fracture mechanism was quasi-cleavage, and when the temperature increased to 300 C, the fracture mechanism changed to ductile fracture. Multiplex strength-ening mechanisms existed in the as-weld joint, and the ratio of them varied in different regions. The dominant strengthening mechanism of base metal was precipitation strengthening, while grain boundary strengthening and solid solution strengthening were the primary strengthening mechanism of fusion zone and heat affected zone, respectively.

Study on Microstructure and Performance of Molybdenum Joint Welded by Electron Beam

Beam Deflection Effects on the Microstructure and Defect Creation on Electron Beam Welding of Molybdenum to Kovar

Microstructure evolution and embrittlement of electron beam welded TZM alloy joint

Uncovering the Weakening Mechanism of Electron Beam Welded Joints of La2O3 Dispersion Strengthened Molybdenum Alloy: Experiment and Simulation

Investigation of Microstructure and Mechanical Performance in IN738LC Joint by Vacuum Electron Beam Welding

Microstructures and Properties of the Dissimilar Joint of Pure Molybdenum/t2 Copper by Single-Mode Laser Welding

Microstructure and mechanical properties of electron beam welded dissimilar TiAl/Ti60 joint

Microstructures and Mechanical Properties of Weld Metal and Heat-Affected Zone of Electron Beam-Welded Joints of HG785D Steel

Microstructure and Properties of Electron Beam Welded Joints of Tantalum and Tungsten

Microstructure and Mechanical Properties of 5a02/0cr18ni9 Joint by Electron Beam Welding

Effect of Electron Beam Oscillation Welding of Molybdenum and Titanium

Analysis of the Response of Thermal-Affect and Multiplex Strengthening Mechanisms of Mg-10Gd Electron Beam Welded Joint

Formability Behavior, Microstructural Evolution, and Mechanical Properties of GH4169 and Electroformed Ni Electron Beam Welded Joint

Microstructural Characteristics and Mechanical Properties of an Electron Beam-Welded Ti/Cu/Ni Joint

Microstructure Evolution And Fracture Behaviour For Electron Beam Welding Of Ti-W-4v

Crack formation and control upon the electron beam welding of TiAl-based alloys

Microstructures and Formation of Electron Beam Welding Joint of QCr0.8 and 1Cr21ni5ti

The Microstructure and Mechanical Properties of Vacuum Electron Beam Welded Joint of 30CrMnSiA Steel

Experimental Study of Electron Beam Welded Qcr0.8 Bronze Joint

Microstructure and fracture path of electron beam welded joint of QCr0.8/TC4 sheet

Study of Microstructure and Performance Evaluation of Zr-Sn-Nb Joints by Electron Beam Welding