Abstract:The electron beam welding was made on the 2mm equal thickness Qcr0.8 and 1Cr21Ni5Ti. The microstructural characteristics and compositions were investigated by optical microscopy and scanning electron microscopes. The actual microstructural characteristics were identified. According to the characteristics of the electron beam welding, a physical model was built about electron beam welding joint formation mechanism on the equal thickness 2mm Qcr0.8 and 1Cr21Ni5Ti. The formation mechanism of unhomogeneous joint structure was discussed. The result showed microstructure of QCr0.8/1Cr21Ni5Ti joint consists of Cu (ss.Fe)+(alpha + epsilon) casting mixed structures, which were very unhomogeneous on microstructure and chemical composition. The macrostructure can be divided into three parts. There were alike microstructure zones at the bottom of the joint and top near QCr0.8, which consists of Cu(ss.Fe) possess of some discrete unhomogeneous alpha + epsilon, There was a + c zone with little discrete Cu(ss.Fe) at the middle of the joint. The joint microstructure was formed through five phases: the metal melting and keyhole forming phase, the initial freezing phase gamma --> alpha was separated out and three zones was shaped in this phase), the medial freezing phase(gamma + epsilon crystallization), the upper freezing phase(Cu(ss.Fe) was formed and joint solidified) and the terminative freezing phase(elements diffusing, gamma --> alpha phase transform, final microstructure formed). The primary reason comes from the unsymmetrical heat input on the joint because different materials showed relevant physical and chemical characters when they were rapid heated and cooled during the electron beam welding.

Experimental Study of Electron Beam Welded Qcr0.8 Bronze Joint

Microstructure and mechanical properties of butt joints of QCr0.8／1Cr21NiSTi equal-thickness dissimilar materials by electron beam welding

Microstructures and phase composition of QCr0.8/1Cr21Ni5Ti joint by EBW with focus on steel side

Microstructures and Formation of Electron Beam Welding Joint of QCr0.8 and 1Cr21ni5ti

The Joint Formation Mechanism In Electron Beam Welding On The Center Of Equal Thickness Qcr0.8 And 1cr21ni5ti

Analysis of mechanical properties of EBW joint of chromium-bronze to duplex stainless steel

Formation mechanism of electron beam melt-brazed joint of chromium-bronze and duplex phase stainless steel

Microstructure and mechanical property of electron beam self-melting brazing joint of titanium alloy to chromium bronze

Microstructures and phase composition of QCrO.8/lCr21Ni5Ti joint by EBW with focus on sdteei side

Microstructure and fracture path of electron beam welded joint of QCr0.8/TC4 sheet

Microstructure and performance of dissimilar joint QCr0.8/TC4 welded by uncentered electron beam

Melt-brazing chromium-copper to double-phase stainless steel by electron beam

Investigation on process and microstructure of Ti/Ni/Cu joints by electron beam welding

Electron beam welding of 304 stainless steel to QCr0.8 copper alloy with copper filler wire

Study on Microstructure and Performance of Molybdenum Joint Welded by Electron Beam

Microstructural Characteristics and Mechanical Properties of an Electron Beam-Welded Ti/Cu/Ni Joint

Investigation of Microstructure and Mechanical Performance in IN738LC Joint by Vacuum Electron Beam Welding

Microstructure and Mechanical Properties of 5a02/0cr18ni9 Joint by Electron Beam Welding

Research on microstructures and properties of electron beam welding joints of Ti-Ni-Cu

Microstructure and mechanical properties of electron beam welded dissimilar TiAl/Ti60 joint

Investigation on process optimization of Cu/Ti electron beam welding