Abstract:Phosphorus (P) is an essential nutrient for living organisms and cannot be replaced or substituted. In this paper, we present a simple yet efficient membrane free electrochemical system for P removal and recovery as calcium phosphate (CaP). This method relies on in situ formation of hydroxide ions by electro mediated water reduction at a titanium cathode surface. The in situ raised pH at the cathode provides a local environment where CaP will become highly supersaturated. Therefore, homogeneous and heterogeneous nucleation of CaP occurs near and at the cathode surface. Because of the local high pH, the P removal behavior is not sensitive to bulk solution pH and therefore, efficient P removal was observed in three studied bulk solutions with pH of 4.0 (56.1%), 8.2 (57.4%), and 10.0 (48.4%) after 24 h of reaction time. While P removal efficiencies are not generally affected by bulk solution pH, the chemical-physical properties of CaP solids collected on the cathode are still related to bulk solution pH, as confirmed by structure characterizations. High initial solution pH promotes the formation of more crystalline products with relatively high Ca/P molar ratio. The Ca/P molar ratio increases from 1.30 (pH 4.0) to 1.38 (pH 8.2) and further increases to 1.55 (pH 10.0). The formation of CaP precipitates was a typical crystallization process, with an amorphous phase formed at the initial stage which then transforms to the most stable crystal phase, hydroxyapatite, which is inferred from the increased Ca/P molar ratio from 1.38 (day 1) to the theoretical 1.76 (day 11) and by the formation of needle-like crystals. Finally, we demonstrated the efficiency of this system for real wastewater. This, together with the fact that the electrochemical method can work at low bulk pH, without dosing chemicals and a need for a separation process, highlights the potential application of the electrochemical method for P removal and recovery.

Current Pulsated Electrochemical Precipitation for Water Softening

Polarity Reversal Electrochemical Process for Water Softening

Continuous Multistage Electrochemical Precipitation Reactor for Water Softening

Membrane-based Electrochemical Precipitation for Water Softening

Electrochemical Oxidation of Chemi-Thermo-mechanical Pulping Wastewater

Electrochemical water softening using air-scoured washing for scale detachment

Enhanced electrochemical softening of cooling water with three-dimensional cathodes

Robust electrolysis system divided by bipolar electrode and non-conductive membrane for energy-efficient calcium hardness removal

Ni-P-PTFE cathode with low surface energy for enhancing electrochemical water softening performance

Electrochemical water softening technology: From fundamental research to practical application

Overcoming limitations in electrochemical water softening: A comprehensive analysis of key factors and recent technological advancements

An integrated electrolysis-microfiltration-ion exchange closed-loop system for effective water softening without chemicals input and spent regenerant discharge

Improving cathode cleaning and current efficiency by regulating loose scale deposition in scale inhibitor-containing water

Coupling of Electric and Flow Fields to Enhance Ion Transport for Energy-Efficient Electrochemical Tap-Water Softening

SCALING PROBLEM AND PREVENTING MEASURES OF ELECTRODEIONIZATION PROCESS

Subtle introduction of membrane polarization-catalyzed H2O dissociation actuates highly efficient electrocoagulation for hardness ion removal

Effectiveness of electrochemical softening for removing hardness in real groundwater

Electrochemical precipitation for water and wastewater treatment

Electrodialysis Technology for Water Softening Regarding Water Equilibrium

Electrochemical Induced Calcium Phosphate Precipitation: Importance of Local pH

Facilitating removal efficiency of electrochemical descaling system using confined crystallization membranes