Effectiveness of electrochemical softening for removing hardness in real groundwater

Merve Ulusoy,İsmail Şimşek

DOI: https://doi.org/10.1007/s10800-024-02206-9

IF: 2.925

2024-10-09

Journal of Applied Electrochemistry

Abstract:The applicability of electrochemical treatment which stands out with its advantages over other methods to the removal of hardness in real groundwater was investigated in this study. This treatment method was directly applied in a stainless steel cell used as the anode. Spiral stainless steel with a large surface area was utilized as the cathode. The effects of pH (5.00–11.00), current density (1.89–15.15 mA cm −2 ), HCO 3 /Hardness ratio: (0.8/1–1.4/1), and operating time (5–40 min.) parameters on the removal efficiency were investigated. As a result of the experiments, the optimal conditions (initial pH: 7.24, current density: 11.36 mA cm −2 , HCO 3 /Hardness ratio: 1/1, operating time: 20 min.) were determined. Under these conditions, 90% hardness removal and 92% alkalinity removal efficiencies were achieved. The energy consumption for electrochemical softening of 1 L groundwater was calculated as 0.0379 kWh L −1 , and the energy consumption per 1 kg of CaCO 3 was calculated as 56.90 kWh kg −1 CaCO3 . Additionally, the cathode surface to which the hardness causing ions adsorbed was imaged using Scanning Electron Microscopy, and Fourier Transform Infrared Spectroscopy analysis of the precipitate on the cathode was performed. The obtained experimental data were statistically evaluated using the multiple linear regression model and the most important independent variable was determined as time.

electrochemistry