Abstract:Removing heavy metal ions from wastewater reduces health and ecological risks and allows for their reuse. Polymer inclusion membranes with integrated ion carriers offer an efficient solution for removing toxic metal ions from industrial wastewater. These membranes can be further enhanced by using biodegradables polymer blends and incorporating nanofillers to improve their selectivity, stability, extraction efficiency, and biodegradability. In this study, a novel biodegradable polymer blend consisting of 54% poly(lactic acid) (PLA) and 13% polybutylene adipate terephthalate (PBAT) was utilized as the base polymer, with 30% Aliquat 336 as an ion carrier and either 3% graphene oxide (GO) or 3% cloisite 30B (C30B) as nanofillers. The hybrid blend contained a total of 3% nanofillers, with 1.5% graphene oxide (GO) and 1.5% cloisite 30B (C30B). These components were integrated through the evaporation casting method and evaluated for their potential as polymer inclusion membranes (PIMs) for Cr(VI) extraction. Various analytical methods, including X-ray diffraction (XRD), attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy, scanning electron microscopy (SEM), and thermogravimetric analysis (TGA), were employed to explore the microstructure-property relationships of the fabricated nanocomposite PIMs. The analyses revealed the development of new semi-crystalline membrane structures, resulting in enhanced hexavalent chromium extraction. It was found that the presence of nanofillers altered the bulk structure, creating apparent microvoids in the membranes filled with 3% GO and the hybrid membrane, which were not observed in membranes filled with C30B. This resulted in higher extraction efficiency in the membranes loaded with GO, whereas membranes loaded with C30B exhibited decreased Cr(VI) extraction. An intermediate extraction percentage was found in the hybrid membrane filled with both nanofillers. Additionally, the incorporation of GO and C30B significantly improved membrane stability across various media, reducing mass loss in NaCl/NaOH to 13.36%. The TGA analyses further confirmed that membranes incorporating GO and C30B exhibited improved thermal stability.

Synthesis and characterization of a new hydrophilic boehmite-PVB/PVDF blended membrane supported nano zero-valent iron for removal of Cr(VI)

Negatively-charged Nanofiltration Membrane and Its Hexavalent Chromium Removal Performance.

The Efficient Removal of Low Concentration Hexavalent Chromium Via Combining Charged Microporous Membrane and Micellar Adsorption Filtration

Highly Efficient Immobilization of NZVI Onto Bio-Inspired Reagents Functionalized Polyacrylonitrile Membrane for Cr(VI) Reduction.

Comprehensive study on the removal of chromate from aqueous solution by synthesized kaolin supported nanoscale zero-valent iron

Chromium Removal Using Resin Supported Nanoscale Zero-Valent Iron.

ZIF-67 grafted-boehmite-PVA composite membranes with enhanced removal efficiency towards Cr(VI) from aqueous solutions

Removal of Hexavalent Chromium from Wastewater by Cu/Fe Bimetallic Nanoparticles

Polyvinylamine-grafted polypropylene membranes for adsorptive removal of Cr(VI) from water

Advancements in Cr(VI) Removal from Aqueous Solution Using PLA/PBAT/GO/Cloisite 30b Hybrid Nanocomposite Polymer Inclusion Membranes

Immobilizing Fe0 nanoparticles on covalent organic framework towards enhancement of Cr(VI) removal by adsorption and reduction synergistic effect

Incorporation of Zr-based metal-organic polyhedron into the PDA/PVDF adsorptive membrane for rapid removal of Cr(VI)

Insight into the efficient co-removal of Cr(VI) and Cr(III) by positively charged UiO-66-NH<sub>2</sub> decorated ultrafiltration membrane

Nanoscale zero-valent iron-modified PVDF membrane prepared by a simple filter-press coating method can robustly remove 2-chlorophenol from wastewater

Integration of adsorption, reduction, and filtration in PANI/PVDF nanofiber composite membrane for removal of Cr(VI)

A novel lignin hydrogel supported nZVI for efficient removal of Cr(VI)

In Situ Carbothermal Synthesis of Nanoscale Zero‐Valent Iron Functionalized Porous Carbon from Metal–Organic Frameworks for Efficient Detoxification of Chromium(VI)

Synergy of Adsorption and Photocatalytic Reduction for Efficient Removal of Cr(VI) with Polyvinylidene Fluoride@Polyvinyl Alcohol–FeC 2 O 4 /Bi 2.15 WO 6

Cellulose hydrogel coated nanometer zero-valent iron intercalated montmorillonite (CH-MMT-nFe0) for enhanced reductive removal of Cr(VI): Characterization, performance, and mechanisms

Activated carbon fiber-supported nano zero-valent iron on Cr(VI) removal