Abstract:Biomass has been widely used due to its environmental friendliness, sustainability, and low toxicity. In this study, aminophosphorylated cellulose (PNC), a biomass flame retardant containing phosphorus and nitrogen, was synthesized by esterification from cellulose and introduced into polyurethane to prepare flame-retardant rigid polyurethane foam. The combustion properties of the PU and PU/PNC composites were studied using the limiting oxygen index (LOI), UL-94, and cone calorimeter (CCT) methods. The thermal degradation behavior of the PU and PU/PNC composites was analyzed by thermogravimetric analysis (TGA) and thermogravimetric infrared spectroscopy (TG-IR). The char layer after combustion was characterized using SEM, Raman, and XPS. The experimental results showed that the introduction of PNC significantly improved the flame-retardant effect and safety of PU/PNC composites. Adding 15 wt% PNC to PU resulted in a vertical burning grade of V-0 and a limiting oxygen index of 23.5%. Compared to the pure sample, the residual char content of PU/PNC15 in a nitrogen atmosphere increased by 181%, and the total heat release (THR) decreased by 56.3%. A Raman analysis of the char layer after CCT combustion revealed that the ID/IG ratio of PU/PNC15 decreased from 4.11 to 3.61, indicating that the flame retardant could increase the stability of the char layer. The TG-IR results showed that PNC diluted the concentration of O2 and combustible gases by releasing inert gases such as CO2. These findings suggest that the developed PU/PNC composites have significant potential for real-world applications, particularly in industries requiring enhanced fire safety, such as construction, transportation, and electronics. The use of PNC provides an eco-friendly alternative to traditional flame retardants. This research paves the way for the development of safer, more sustainable, and environmentally friendly fire-resistant materials for a wide range of applications.

Self-Extinguishing Low-Nitrogen Nitrocellulose Based On Synergistic Effect Of Dimethyl Methylphosphonate And Long-Chain Chlorinated Paraffin

A Phosphorus-Nitrogen Containing Dendrimer Reduces The Flammability Of Nanostructured Polymers With Embedded Self-Assembled Gel Networks

Nanoclay, intumescent flame retardants, and their combination with chemical modification for the improvement of the flame retardant properties of polymer nanocomposites

Chemical modification of nitrocellulose by grafting sodium carboxymethyl

Synthesis of bio-based phosphorus-nitrogen hybrid cellulose nanocrystal flame retardant for improving of fire safety of epoxy resin

Novel macromolecular flame retardant derived from sulfonated naphthalene monomer for simultaneous fire safety and high performance of polycarbonate

Analysis and Characterization of Nitrocellulose As Binder Optimized by 1-Butyl-3-methylimidazolium Bis(trifluoromethylsulfonyl)imide

Thermal and Combustion Properties of Biomass-Based Flame-Retardant Polyurethane Foams Containing P and N

Analysis and characterisation of 1-butyl-3-methylimidazolium hexafluorophosphate as a humectant of nitrocellulose

Facile Strategy to Design a Cellulose Nanocrystal-Based Nanocomposite Fire Retardant with Strong Smoke Suppression Efficiency

Novel Eco-Friendly Flame Retardants Based on Nitrogen–Silicone Schiff Base and Application in Cellulose

Regulating the Thermal Behavior of Nitrocellulose by Stable Incorporation of a Green Supramolecular Salt

Grafting cellulose nanocrystals with phosphazene-containing compound for simultaneously enhancing the flame retardancy and mechanical properties of polylactic acid

Synergistic Effects of Layered Double Hydroxide with Phosphorus-Nitrogen Intumescent Flame Retardant in PP/EPDM/IFR/LDH Nanocomposites

Solvent-free and Electron Transfer-Induced Phosphorus and Nitrogen-Containing Heterostructures for Multifunctional Epoxy Resin

An experimental study on the effects of ethanol content on the decomposition and burning risks of nitrocellulose

A New Phosphorous/Nitrogen-Containing Flame-Retardant Film with High Adhesion for Jute Fiber Composites

Preparation and Properties of Novel Flame Retardant Low-Density Polyethylene Composites

Modification of hedgehog-like structured carbon nanohorns to promote flame retardant synergistic effect in assembled coatings for protective cotton fabrics

Surface Modification of Cellulose Nanocrystal and Its Applications in Flame Retardant Epoxy Resin

Bioinspired sustainable cellulose-based nanocomposites with remarkable flame-retardant performance