Abstract:Summary Traditional wooden structures are characterized by the presence of a column base that seems to be floated above the foundation stone. This study used pseudo‐static experiments to assess the seismic performance of flat pendulum floating resting columns, focusing on the decay and repair of the wood frame (WF). First, an artificial method was used to simulate fungal decay damage of column‐foot joints, and filling reinforcement was applied to the decayed column‐foot joints, and second, according to the design method in the Sung dynasty architecture, the Ying‐tsaofa‐shih (building standards). This study presents the findings of pseudo‐static tests that were conducted at Yangzhou University. Three 1:3.52 scaled specimen WFs with flat‐pendulum‐floating‐shelf (FPFS)‐typed (Ping‐bai‐fu‐ge) columns, i.e., non‐damaged WF (named after NT), considering the damaged WF (named after DF) and strengthening damaged WF (named after DR) with one‐way straight mortise‐tenon joints (OWSMT) joints were made and subjected to cyclic lateral loads during testing. The properties of the WFs with FPFS columns, such as the failure mode, hysteretic and envelope curves, strength and stiffness deterioration, and energy dissipation, have been studied. Finally, the effects of additional damage and reinforcement measures on the seismic performance of WFs are analyzed and compared with the finite element numerical simulation results. This research shows that damage to the column foot decreases the WF's seismic performance, although filler reinforcement may increase it. The foot and mortise joints are interconnected and interact in the wood frame's seismic stressing mechanism. Foot decay reduces the seismic performance of the foot joint, hence increasing the seismic energy dissipation activity of the mortise joints.

Study on Mechanical Behaviors of Column Foot Joint in Traditional Timber Structure

Seismic Behavior of Cft Column and Steel Pile Footings

Numerical Modelling Strategies for Column Rocking Behavior in Traditional Timber Structures

Experimental study on seismic behavior of assembled steel beam-PC column composite frames

Experimental Methods for Seismic Simulation of Structural Columns: State-of-the-Art Review and Introduction of New Multiuse Structural Testing System

STUDY OF THE STRESS DISTRIBUTION AND MECHANICAL PROPERTIES OF THE BEAM-COLUMN JOINT IN STEEL ROOF TRUSS BASED ON FULL-SCALE TESTS

EXPERIMENTAL EVALUATION OF A TYPICAL BRIDGE COLUMN FOOTING DESIGNED TO CURRENT CALTRANS STANDARDS

EXPERIMENTAL STUDY ON THE SEISMIC BEHAVIOR OF CFST RECTANGULAR COLUMN TO H-SECTION STEEL BEAM CONNECTIONS WITH EXTERNAL STIFFENERS

Numerical Studies on Full-Scale Steel Columns under Complex Seismic Loading

Seismic Performance Analysis of Ancient Palace-Style Timber Structure Considering Column Rocking Effect

Lateral performance of mortise-tenon jointed frames in multi-story traditional heavy timber structures: Mechanism and quantification

Floating column mechanism experimental investigation in historic timber buildings subjected to decay for seismic resilience

Experiment on seismic behavior of earthquake-resilience prefabricated cross hinge column foot joint

Investigation of seismic response of rocking column with a novel mechanical connection device

Experimental Study on Mechanical Behavior of Box-Brace to Box-Column Foot Joints

A fiber beam-column model for damage assessment of traditional Chinese timber structures

LATERAL LOAD-RESISTING ANALYSIS AND EXPERIMENTAL VERIFICATION OF ANCIENT TIMBER COLUMN-FRAME BASED ON SWING-COLUMNS PRINCIPLE

Performance degradation by column foot damage: From column foot joints to frames

Numerical modelling strategy and load resisting mechanism of palace-type traditional wooden frame

Strong axis low-damage performance of rocking column-base joints with asymmetric friction connections

Experimental investigation on joints between steel-reinforced concrete T-shaped column and reinforced concrete beam under bidirectional low-cyclic reversed loading