Abstract:This paper studies control strategies for an AC/AC system based on a modular multilevel matrix converter (M3C) when an asymmetric fault occurs in the secondary side ac system. Firstly, the operating principle of M3C is briefly introduced and verified by simulation. Then, based on its mathematical model by double αβ0 transformation, the decoupled control strategies for the primary side and secondary side systems are designed. In view of the asymmetric fault condition of the secondary side system, the positive sequence and negative sequence components of voltages and currents are separated and extracted, and then a proportional resonant controller (PR) is used to regulate the positive and negative sequence currents at the same time to realize decoupled current control in the αβ reference frames. The capacitor voltage balancing control, which consists of an inter-subconverter balancing control and an inner-subconverter balancing control, is realized by adjusting four circulating currents. Finally, the proposed control strategy is validated by simulation in the PSCAD/EMTDC software (Manitoba HVDC Research Center, Canada). The result shows that during the period of the BC-phase short-circuit fault occurring in the secondary side system, the whole system can still operate stably and transmit a certain amount of active power, according to their set values. Furthermore, the capacitor voltages are balanced, with a slight increase during the fault period. The simulation results verify the effectiveness of the proposed control strategy.

Research on common mode voltage suppression of three-phase four-bridge matrix converter considering unbalance inductance

Common-Mode Voltage Reduction for Three-Phase-to-Four-Leg Direct Matrix Converter with a Novel Control Strategy

Common-Mode Voltage Reduction with Improved Output Voltage for Three-to-Five-Phase Indirect Matrix Converters

Research on the capacity of four-leg matrix converter with unbalanced load

Closed-Loop Decoupled Control and Implementation of the Modular Multilevel Matrix Converter in Similar/Equal Frequency Operation

The Modulation of Common Mode Voltage Suppression for A Three-Level Matrix Converter

Decoupled Modulation With Common-Mode Load-Voltage Control for Three-Phase Four-Leg Three-Level Inverter

Study of Unbalanced Circular Current Suppressing for Modular Multilevel Converter

Research on space-vector modulation and common-mode voltage of four-leg matrix converter

Modulation strategy to reduce common-mode voltage for three-to-five phase indirect matrix converter

The study of SPWM control strategy to reduce common-mode interferences in three-phase four-leg inverters

Research on an Asymmetric Fault Control Strategy for an AC/AC System Based on a Modular Multilevel Matrix Converter

Finite-Level-State Model Predictive Control for Sensorless Three-Phase Four-Arm Modular Multilevel Converter

EMI Modeling Method and Active Suppression Technology of Common-Mode Electromagnetic Interference in Three-Phase Two-Level Inverter Based on Four-Bridge Topology

Novel 3-D Space Vector Modulation Scheme for Three-phase Four-wire Tri-level Converter

A virtual space vector modulation strategy for suppressing common-mode voltage in dual-output T-type three-level converters

Improvement of Matrix Converter's Topology and Study on It's Control Strategy under Unbalance Load

Research on the modulation and control of multilevel matrix converter

Generalized Modulation of Common Mode Voltage Reduction for Current Source Inverter in Balanced and Unbalanced Load Cases

Arm Voltage Balance Control of a Modular Multilevel Matrix Converter with Inner and Outer Loop Double Adjustment Based on Circulating Current

A Common-Mode Voltage Elimination Approach Based on Modulation Signal Decomposition for the Three-Level Back-to-Back Converter