Abstract:In this article, a new bidirectional single-stage interleaved totem-pole electrolytic capacitorless ac–dc converter with high-frequency isolation and low components count is proposed. The proposed converter is constructed using nonregulating two-phase interleaved totem-pole converter switched with a fixed 50% duty on the grid side and a full-bridge on the dc-side for active power and dc output regulation. This switching method results in a ripple-free grid current regardless of the magnitude of the input inductances. Consequently, a proper design of input inductance secures soft switching for all switches under wide voltage and load ranges without an auxiliary circuit or resonant tank. Hence, the proposed topology overcomes the reverse recovery issue, thereby enabling the use of Si devices in CCM. Moreover, the current spike around the ac main zero-crossing is avoided in the CCM operation due to small rectified voltage around zero-crossing. Furthermore, the instantaneous powers at the grid side and dc-side are identical since the proposed topology is electrolytic capacitorless with inherent second harmonic ripple current at the dc-side. PFC is inherently performed in the proposed converter without a current shaping control loop, and the phase-shift angle is the only control variable. Hence, the control system is simple and reliable. A 3.3 kW prototype of the proposed converter is built and tested in order to verify the performance and the theoretical claims.

An Integrated AC-DC Converter with Isolation and Reduced Number of Power Components

A High-Efficiency Active Clamped Flyback AC-DC Converter Using an Integrated Digital Isolator in Isolated Communication

Soft-Switching Single Stage Isolated Ac-Dc Converter for Single-Phase High Power Pfc Applications

Soft-Switching Single-Stage Current-Fed Full-Bridge Isolated Converter for High Power Ac/Dc Applications

Single-Phase Single-Stage Isolated ZCS Current-Fed Full-Bridge Converter for High-Power AC/DC Applications

Soft-switching three-phase matrix based isolated AC-DC converter for DC distribution system

A Single-Stage Interleaved Resonant Bridgeless Boost Rectifier with High-Frequency Isolation

An Interleaved Three-Phase PWM Single-Stage Resonant Rectifier with High-Frequency Isolation

Interleaved Totem-Pole ZVS Converter Operating in CCM for Single-Stage Bidirectional AC–DC Conversion With High-Frequency Isolation

Design of Ac/dc Converter for Bidirectional On-Board Battery Charger with Minimizing the Amount of SiC MOSFET

A High Efficiency Two-Stage ZVS AC/DC Converter with All SiC MOSFET

Optimal Design of LLC-based Isolated Single-Stage PFC Converter

PFC converter with novel integration of both EMI filter and Boost inductors

A PFC Converter With Novel Integration of Both the EMI Filter and Boost Inductor

A high-efficiency single-phase AC/DC converter with enabling window control and active input bridge

An Interleaved Totem-Pole Boost Bridgeless Rectifier with Reduced Reverse-Recovery Problems for Power Factor Correction

Integration of Three-Phase LLC Resonant Converter and Full-Bridge Converter for Hybrid Modulated Multioutput Topology

Integration of Three-Phase LLC Resonant Converter and Full Bridge Converter for Hybrid Modulated Multi-Outputs Topology

An Isolated High-Frequency Dc-Ac Converter Based On Differential Structure With Ultralow Distortion Output Voltage

Dual‐output AC–DC Converter with Three‐port Bridgeless PFC and Non‐isolated DCX

Reduction in Circulating Current with Improved Secondary Side Modulation in Isolated Current-Fed Half Bridge AC-DC Converter