Abstract:In the present study, it was attempted to fabricate a new conductive carbon black (CB) filled poly(ethylene terephthalate) (PET)/polyethylene (PE) in situ microfibrillar composite with a lower percolation threshold through selectively localizing CB particles in the surfaces of the PET microfibrils. The CB particles were first mixed with PE matrix, and then PET was added into CB/PE compound. Subsequently, the CB/PET/PE composite was subjected to a slit die extrusion, hot stretch and quenching process to generate in situ PET microfibrils, in which CB particles moved to the surfaces of the PET microfibrils simultaneously. The morphological observation showed that the PET phases formed well-defined microfibrils, and CB particles did overwhelmingly localize in the surfaces of the PET microfibrils, which led to a very low percolation threshold, i.e., 3.8 vol%, and a good conductivity. The conductive network was built by the contact and overlapping of the CB particles coated PET microfibrils. In addition, the CB particles remaining in the PE matrix also contributed to the conductive paths, especially for the high CB loading filled microfibrillar composites. Because of the complexity of the distribution of CB particles, a high critical resistance exponent t (t = 6.4) exists in this conductive composite. To reveal the possibility of the migration of CB particles from PE to PET, the morphology of the CB/PET/PE composite mixed for different times was examined. It was found that, depending on the mixing time, the CB particles gradually migrated from the PE matrix to the surfaces at first, and then to the center of the PET phases. The preferable distribution of CB particles was originated from several factors including interfacial tension, viscosity, molecule polarity, and mixing process. Furthermore, during the mixing process of the CB/PET/PE composite, the migration of CB particles to PET phase from PE matrix led to the increase of both the viscosity ratio of the dispersed phase to the matrix and the volume of the dispersed phases, thus resulting in larger dispersed CB/PET composite phase particles.

Tensile Piezoresistive Behavior of Polyethylene Terephthalate/Carbon Black Composite

Piezoresistive Behavior of Electrically Conductive Carbon Fillers/Thermoplastic Elastomer Nanocomposites

CARBON BLACK FILLED ELECTRICALLY CONDUCTIVE IN-SITU MICROFIBRILLAR POLY(ETHYLENE TEREPHTHALATE)/POLYETHYLENE COMPOSITE

Poly(ethylene Terephthalate)/carbon Black Composite Fibers Prepared by Electrospinning

Electrically Conductive Carbon Black (CB) Filled in Situ Microfibrillar Poly(ethylene Terephthalate) (pet)/polyethylene (PE) Composite with a Selective CB Distribution

Conductivity and piezoresistivity of conductive carbon black filled polymer composite

The role of the surface microstructure of the microfibrils in an electrically conductive microfibrillar carbon black/poly(ethylene terephthalate)/polyethylene composite

P009_0148_ Efficient Design of Piezoresistive Sensors Based on Carbon Black Conductive Composites

Microstructure of Carbon Nanotubes/pet Conductive Composites Fibers and Their Properties

Investigation on the piezoresistive behavior of high-density polyethylene/carbon black films in the elastic and plastic regimes

Formation of in Situ CB/PET Microfibers in CB/PET/PE Composites by Slit Die Extrusion and Hot Stretching

Effect of Carbon Black on the Strain Sensing Property of 3D Printed Conductive Polymer Composites

Mechanical Properties of Compression Molded Specimens of CB/PET/PE Composites with In-situ Electrical Conductive Microfibril Network

Percolation behavior and sensing performance of polypropylene‐based conductive polymer composites under compressive strains and temperature

Mechanical Properties, Melting and Crystallization Behaviors, and Morphology of Carbon Nanotubes/Continuous Carbon Fiber Reinforced Polyethylene Terephthalate Composites

Fabrication and characterization of piezoresistive flexible pressure sensors based on poly(vinylidene fluoride)/thermoplastic polyurethane filled with carbon black‐polypyrrole

Effect of Dispersion of Carbon Black on Electrical and Thermal Properties of Poly(Ethylene Terephthalate)/Carbon Black Composites

Selective Distribution of CB and Electrical Properties of Poly(ethylene terephthalate)-Polyethylene Multiphase System

Electrical and Physical Properties of Polyethylene/Carbon Black Composites as Influence by Different Matrix Mixtures

Designing Formulation Variables of Extrusion-Based Manufacturing of Carbon Black Conductive Polymer Composites for Piezoresistive Sensing

PI /CB Conductive Composites with Low Percolation Threshold Prepared by Electrospinning Technique