Abstract:Effects of carbon black (CB) particle distribution, feeding sequence and blending time on the electrical conductivity of high density polyethylene (HDPE) /ethylene-vinyl acrylate copolymer (EVA) blends filled with CB were investigated by using scanning electron microscope (SEM) and transmission electron microscope (TEM). The results reveal that CB particles distribute selectively in HDPE phase due to better flexibility of HDPE chains than that of EVA. Feeding order significantly influences the electrical conductivity of the composites by affecting the distributed status of CB particles in the two immiscible phases, i.e. HDPE phase and EVA phase. In order to gain high electrical conductivity, CB should be firstly added into EVA and then HDPE is added, or EVA and HDPE are initially blended uniformly and then CB particles are added. Blending time also has remarkable effect on the electrical conductivity of the composites. With the increase of blending time, the electrical resistivity of all the polymer composites with different feeding sequences decreases firstly and then increases. In later stage of blending, the electrical resistivity of HDPE/EVA-CB changes slightly with blending time compared with the other two blend systems. The phase morphology evolution dominates the conductivity of HDPE/CB-EVA during blending, however, distribution of CB particles dominates the conductivity of HDPE/EVA-CB. To achieve better electrical conductivity, appropriate feeding sequence and blending time should be adopted.

Selective Distribution of CB and Electrical Properties of Poly(ethylene terephthalate)-Polyethylene Multiphase System

Selective Distribution of Carbon Black in Epoxy Resin/Thermoplastic Multiphase Composites

Effect of Dispersion of Carbon Black on Electrical and Thermal Properties of Poly(Ethylene Terephthalate)/Carbon Black Composites

Effect of Processing Technology on the Electrical Conductivity of Polymer Blends Filled with Carbon Black

Selective Localization of Carbon Black in Bio-Based Poly (Lactic Acid)/Recycled High-Density Polyethylene Co-Continuous Blends to Design Electrical Conductive Composites with a Low Percolation Threshold

Morphology and physical properties of composites based on high-density polyethylene/propylene-ethylene random copolymers blends and carbon black

Conductive polycarbonate composites prepared by a ternary polymer blend approach involving sea‐island‐type interfacial carbon black networks

Effect of Carbon Black Self-Networking on Surface-Morphological and Electrical Properties of Immiscible Polypropylene/polyamide 6 Blends

Poly(ethylene Terephthalate)/carbon Black Composite Fibers Prepared by Electrospinning

Electrical and Physical Properties of Polyethylene/Carbon Black Composites as Influence by Different Matrix Mixtures

Characterization of Carbon Black-Filled Immiscible Polypropylene/Polystyrene Blends

Distribution of Carbon Black in Polypropylene/Epoxy Blend

Carbon Black Selective Dispersion and Electrical Properties of Epoxy Resin/Polystyrene/Carbon Black Ternary Composites

Electrical Properties and Crystallisation Behaviour of Polypropylene/Carbon Black Composites

Conductive Nylon-Mxd6 Composites Prepared by Melt Compounding Associated with Formation of Carbon Black-Covered PET Domains Serving As Big Conductive Particles

Elevated conductivity and electromagnetic interference shielding effectiveness of PVDF/PETG/carbon fiber composites through incorporating carbon black

Structure and Properties of Electrically Conducting Composites Consisting of Alternating Layers of Pure Polypropylene and Polypropylene with a Carbon Black Filler

In situ microfibrillar morphology and properties of polypropylene/polyamide/carbon black composites prepared through multistage stretching extrusion

Low Percolation Thresholds of Electrical Conductivity and Rheology in Poly(Ethylene Terephthalate) Through the Networks of Multi-Walled Carbon Nanotubes

Effects of POE and Carbon Black on the PTC Performance and Flexibility of High-Density Polyethylene Composites

Morphology and electro-thermal characteristics of polyethylene self-limited temperature heating composite