Abstract:This paper proposed a low-frequency vibration damping method which attaches some ultralight locally resonant plate-type units onto the vibration structure as dampers. Owing to the designable band gap property of the units, the structural vibration in the pre-defined band gap range is localized and consumed by the dampers, thereby realizing a vibration damping effect. This damping method achieved vibration attenuation via the band gap characteristics of the local resonance unit, while the band gap properties operated in a frequency band with a certain width, so the vibration within the band gap range could be attenuated effectively. Moreover, as the frequency range, bandwidth and polarization direction of the band gap are tunable by adjusting the configuration and parameters of the unit cell, this vibration damping method shows flexible design potential. The advantage of this damping method was that, in addition to a considerable working bandwidth and convenient designable working frequency range, the additional mass was minimal and negligible. The total weight of the damper could reach levels as low as 0.3 parts per thousand of the objective vibration structure, displaying no evident increase in the overall weight. Moreover, even if only a single cell was used, a good damping effect with strong multi-peak suppression performance could be obtained. Compared with conventional methods, this damping method reduced the amplitude of the vibration peak of the original structure but did not generate additional vibration peaks on either side of the reduced peak like previous vibration absorbers. In addition, due to the fact that the configuration of the damper unit can be easily and flexibly designed according to actual application requirements, it has a wide range of engineering applications including but not limiting to aircraft, land-based vehicles, modern industrial equipment, precision instruments and household appliances.

An Efficient Method to Quench Excess Vibration for a Harmonically Excited Damped Plate

Quenching Vibration on a Harmonically Excited Symmetric Laminated Composite Plate

Quenching Vibration by Imposing Nodes on a Plate Subjected to Multiple Harmonics with Distinct Excitation Frequencies

Imposing points of zero displacement and zero slopes on a plate subjected to steady-state harmonic excitation

Optimizations of distributed dynamic vibration absorbers for suppressing vibrations in plates

Inverse Problem of Imposing Nodes to Suppress Vibration for a Structure Subjected to Multiple Harmonic Excitations

Analytical optimization of an inerter‐based dynamic vibration absorber for suppressing plate vibration

Vibration Suppression on the Composite Laminated Plates Subjected to Aerodynamic and Harmonic Excitations Based on the Nonlinear Piezoelectric Shunt Damping

An Optimization Design Method for Constrained Damping Plate

Response Adjustable Performance of a Visco-Elastomer Sandwich Plate with Harmonic Parameters and Distributed Supported Masses under Random Loading

Optimization of Plate with Partial Constrained Layer Damping Treatment for Vibration and Noise Reduction

Experimental Study on the Vibration Control of Plate with Controllable Constrained Damping Layer

Reduction of Sound Radiation from Plate Using Vibration Absorbers

Robust Control of Plate Vibration Via Active Constrained Layer Damping

Dynamic Vibration Absorbers for Vibration Control Within A Frequency Band

Structural Topology Optimal Design To Reduce Vibration And Noise Of Thin Plate

Ultralight Plat-Type Vibration Damper with Designable Working Bandwidth and Strong Multi-Peak Suppression Performance

Finite Element Modeling and Vibration Control of Plates with Active Constrained Layer Damping Treatment

Vibration control mechanisms of plate structures by 1D acoustic black hole dynamic vibration absorber

Application of Dynamic Vibration Absorbers in Structural Vibration Control under Multi-Frequency Harmonic Excitations

Dynamic stability of thin rectangular plates subjected to excitations provided by three vibrators