A Self-Cooling and Flame-Retardant Electrolyte for Safer Lithium Ion Batteries

Lihua Jiang,Qingsong Wang,Ke Li,Ping,Lin Jiang,Jinhua Sun

DOI: https://doi.org/10.1039/c8se00111a

IF: 6.813

2018-01-01

Sustainable Energy & Fuels

Abstract:A composite electrolyte was designed with a double protection mechanism with self-cooling and flame-retardant effects to reduce the flammability of the electrolyte in lithium ion batteries.

What problem does this paper attempt to address?

A Safe Electrolyte Enriched with Flame-Retardant Solvents for High-Voltage LiCoO2||Graphite Pouch Cells

Chao Yang,Xing Zhou,Ruitao Sun,Wenxi Hu,Meilong Wang,Xiaoli Dong,Nan Piao,Jin Han,Wen Chen,Ya You

DOI: https://doi.org/10.1021/acsenergylett.4c02466

IF: 22

2024-01-01

ACS Energy Letters

Abstract:Employing a flame-retardant solvent (FRS) in the electrolyte has shown great potential for improving the safety of lithium-ion batteries (LIBs). Nevertheless, their poor compatibility with salts and commonly used solvents leads to the formation of a heterogeneous system, which drastically limits their concentration in the electrolyte and consequently deteriorates the safety performance. In this work, we employ a bridging solvent diethyl carbonate to raise the solubility of a highly effective FRS, ethoxy pentafluorocyclotriphosphonitrile (PFPN), to a concentration as high as 75 vol % in the electrolyte. The target electrolyte forms a stable N/P-rich cathode-electrolyte interface to protect the electrode from oxygen evolution and transition-metal ion dissolution, thereby enabling the LiCoO2 cathode to preserve 72% capacity retention over 500 cycles at 4.62 V. Moreover, this electrolyte can effectively delay occurrence time and improve the critical temperature of thermal runaway of 1 Ah LiCoO2||graphite pouch cells. Our work proposes a new direction for nonflammable electrolytes toward safe and high-energy LIBs.
Progress of Enhancing the Safety of Lithium Ion Battery from the Electrolyte Aspect

Qingsong Wang,Lihua Jiang,Yan Yu,Jinhua Sun

DOI: https://doi.org/10.1016/j.nanoen.2018.10.035

IF: 17.6

2019-01-01

Nano Energy

Abstract:Electrolyte as the most flammable component of lithium ion battery is always considered to be closely related to its safety. Great efforts are made to optimize electrolyte since it is the ultimate means to improve the lithium ion battery safety. This article reviews the thermal risk of commercial electrolytes and the development of safer electrolytes. The main reason for the thermal instability of the traditional nonaqueous electrolyte is the thermal decomposition of lithium hexafluorophosphate (LiPF6) and highly flammable solvents. Substitution technique of the lithium salt is under developing and the electrolyte flame retardant additives are widely studied. Novel addition technologies like electrospinning and microcapsules are introduced to reduce the restrictions on physical properties of flame retardants and improve electrochemical performances. Overcharge protection additives are simply summarized according to their reaction mechanism. For the breakthrough of new generations of safer electrolytes, nonflammable solvents with new salts and solid state electrolytes are reviewed as well as their existing problems at present. This shall serve as a summary for the development of electrolytes and a reference for the design of next generation of safer electrolytes.
An Intrinsic Flame‐Retardant Organic Electrolyte for Safe Lithium‐Sulfur Batteries

Huijun Yang,Cheng Guo,Jiahang Chen,Ahmad Naveed,Jun Yang,Yanna Nuli,Jiulin Wang

DOI: https://doi.org/10.1002/anie.201811291

2018-01-01

Angewandte Chemie International Edition

Abstract:Safety concerns pose a significant challenge for the large-scale employment of lithium-sulfur batteries. Extremely flammable conventional electrolytes and dendritic lithium deposition cause severe safety issues. Now, an intrinsic flame-retardant (IFR) electrolyte is presented consisting of 1.1 m lithium bis(fluorosulfonyl)imide in a solvent mixture of flame-retardant triethyl phosphate and high flashpoint solvent 1,1,2,2-tetrafluoroethyl-2,2,3,3-tetrafluoropropyl (1:3, v/v) for safe lithium-sulfur (Li-S) batteries. This electrolyte exhibits favorable flame-retardant properties and high reversibility of the lithium metal anode (Coulombic efficiency >99 %). This IFR electrolyte enables stable lithium plating/stripping behavior with micro-sized and dense-packing lithium deposition at high temperatures. When coupled with a sulfurized pyrolyzed poly(acrylonitrile) cathode, Li-S batteries deliver a high composite capacity (840.1 mAh g(-1)) and high sulfur utilization of 95.6 %.
A flame-retardant polymer electrolyte for high performance lithium metal batteries with an expanded operation temperature

Jingwei Xiang,Yi Zhang,Bao Zhang,Lixia Yuan,Xueting Liu,Zexiao Cheng,Yan Yang,Xinxin Zhang,Zhen Li,Yue Shen,Jianjun Jiang,Yunhui Huang

DOI: https://doi.org/10.1039/d1ee00049g

2021-01-01

Abstract:The well-designed flame-retardant polymer electrolyte greatly improves the safety and cycle life of high energy density lithium metal batteries.

energy & fuels,chemistry, multidisciplinary,engineering, chemical,environmental sciences
A Flame-Retardant Polymer Electrolyte for Safe and Long-Life Lithium Metal Battery

Hyeong Jun Cheon,Mincheol Chang

DOI: https://doi.org/10.1149/ma2022-02642305mtgabs

2022-11-24

ECS Meeting Abstracts

Abstract:With the increasing demand for batteries with high energy density, lithium metal anode-based batteries are suitable candidates. Although lithium metal is an attractive material with excellent theoretical specific capacity (3860 mAh/g) and very redox potential (-3.04 V vs. strandard hydrogen electrode), it causes electrolyte leakage, combustion, and explosion problems due to dendrite growth. In the case of conventional liquid electrolytes, dendrites grow more freely and flammable organic solvents are used, making them unsuitable for use with lithium metal anodes. On the contrary, solid polymer electrolyte-based batteries have the advantage of being able to achieve higher energy density as well as better stability to lithium metal. However, the organic component of the solid polymer electrolyte is still flammable, and the polymer/ceramic composite material is also generally flammable, so the safety issue cannot be completely avoided. Here, we show that the addition of a flame retardant effectively reduces the flammability of solid polymer electrolytes. The solid electrolyte consisted of a combination of PEO and flame retardant DMMP, and the composed LFP/solid polymer electrolyte/Li cell exhibited improved cycle stability and ionic conductivity. Figure 1

English Else
Designing Safer Lithium-Based Batteries with Nonflammable Electrolytes: A Review

Shichao Zhang,Siyuan Li,Yingying Lu

DOI: https://doi.org/10.1016/j.esci.2021.12.003

2021-01-01

eScience

Abstract:Lithium-based batteries have had a profound impact on modern society through their extensive use in portable electronic devices, electric vehicles, and energy storage systems. However, battery safety issues such as thermal runaway, fire, and explosion hinder their practical application, especially for using metal anode. These problems are closely related to the high flammability of conventional electrolytes and have prompted the study of flameretardant and nonflammable electrolytes. Here, we review the recent research on nonflammable electrolytes used in lithium-based batteries, including phosphates, fluorides, fluorinated phosphazenes, ionic liquids, deep eutectic solvents, aqueous electrolytes, and solid-state electrolytes. Their flame-retardant mechanisms and efficiency are discussed, as well as their influence on cell electrochemical performance. We conclude with a summary of future prospects for the design of nonflammable electrolytes and the construction of safer lithium-based batteries.
Strategies for Flame-Retardant Polymer Electrolytes for Safe Lithium-Based Batteries

Xiao Ma,Yang Lu,Yu Ou,Shuaishuai Yan,Wenhui Hou,Pan Zhou,Kai Liu

DOI: https://doi.org/10.1007/s12274-024-6902-4

IF: 9.9

2024-01-01

Nano Research

Abstract:The advancement of lithium-based batteries has spurred anticipation for enhanced energy density, extended cycle life and reduced capacity degradation. However, these benefits are accompanied by potential risks, such as thermal runaway and explosions due to higher energy density. Currently, liquid organic electrolytes are the predominant choice for lithium batteries, despite their limitations in terms of mechanical strength and vulnerability to leakage. The development of polymer electrolytes, with their high Young’s modulus and enhanced safety features, offers a potential solution to the drawbacks of traditional liquid electrolytes. Despite these advantages, polymer electrolytes are still susceptible to burning and decomposition. To address this issue, researchers have conducted extensive studies to improve their flame-retardant properties from various perspectives. This review provides a concise overview of the thermal runaway mechanisms, flame-retardant mechanisms and electrochemical performance of polymer electrolytes. It also outlines the advancements in flame-retardant polymer electrolytes through the incorporation of various additives and the selection of inherently flame-retardant matrix. This review aims to offer a comprehensive understanding of flame-retardant polymer electrolytes and serve as a guide for future research in this field.
Non-coordinating flame retardants with varied vapor pressures enabling biphasic fire-extinguishing electrolyte for high safety lithium-ion batteries

Sheng Lei,Ziqi Zeng,Yuanke Wu,Mengchuang Liu,Shijie Cheng,Jia Xie

DOI: https://doi.org/10.1016/j.cej.2023.142181

IF: 15.1

2023-03-23

Chemical Engineering Journal

Abstract:Safety issues of LIBs are closely related to flammable carbonate electrolytes. Traditional strategies for nonflammable electrolytes involve soluble and coordinative flame retardants with limited choices, which interact with lithium ions and lead to deteriorated electrochemical performance. Meanwhile, single dosage of flame retardants fails to suppress ignition of both gas and liquid phases during thermal runaway (TR) of LIBs, thus generating multi-stage fire. Here, we introduce two flame retardants with high and low vapor pressure into carbonate electrolyte through a bridge co-solvent to obtain a non-flammable electrolyte with biphasic fire extinguishing capability. The designed electrolyte not only affords excellent electrochemical performance, but also simultaneously suppresses the combustion of flammable gases and liquid electrolytes. The Li[Ni 0.78 Co 0.10 Mn 0.12 ]O 2 | graphite pouch cell (2.90 Ah) empowered with such electrolyte exhibits outstanding cycling stability (87.5 % retention after 1000 cycles at 0.5 C) and shows only smoke under the severe nail penetration test as well as maximum temperature of TR reduced by 300 °C. What's more, the onset time of TR is delayed by 86 s under thermal abuse test. Furthermore, the pouch cell after 1000 cycles remains flameless under the nail penetration test. This work provides a promising path for expanding the selectivity of flame retardants and offers new strategy for designing advanced non-flammable electrolytes for safe LIBs.

engineering, chemical, environmental
A Trade-Off-Free Fluorosulfate-Based Flame-Retardant Electrolyte Additive for High-Energy Lithium Batteries

Jimin Oh,Ho Seung Lee,Min Pyeong Kim,Young-Gi Lee,Sung You Hong,Kwang Man Kim

DOI: https://doi.org/10.2139/ssrn.4096052

2022-01-01

SSRN Electronic Journal

Abstract:The flammability of organic electrolytes raises increasing safety concerns about the high-capacity batteries of next-generation electric vehicles and smart grid systems. Herein, we report a synthetic dual-functional electrolyte additive bearing two-fold fluorosulfate moieties, which allows flame retardancy without sacrificing battery performance. Electrochemical performance is measured using a high-capacity cell built with Ni-rich LiNi 0.9 Co 0.05 Mn 0.05 O 2 cathode and lithium metal anode. Compared with triphenyl phosphate, which is a known representative flame-retardant, the fluorosulfate-based electrolyte additive shows remarkable capacity retention, reduced interfacial resistance, and enhanced rate capability via the formation of a stable cathode solid electrolyte interfacial layer due to the inflammable sulfite-to-sulfate conversion mechanism.
Electrolyte-Resistant Dual Materials for the Synergistic Safety Enhancement of Lithium-Ion Batteries

Lien-Yang Chou,Yusheng Ye,Hiang Kwee Lee,Wenxiao Huang,Rong Xu,Xin Gao,Renjie Chen,Feng Wu,Chia-Kuang Tsung,Yi Cui

DOI: https://doi.org/10.1021/acs.nanolett.0c04568

IF: 10.8

2021-02-18

Nano Letters

Abstract:Safety issues associated with lithium-ion batteries are of major concern, especially with the ever-growing demand for higher-energy-density storage devices. Although flame retardants (FRs) added to electrolytes can reduce fire hazards, large amounts of FRs are required and they severely deteriorate battery performance. Here, we report a feasible method to balance flame retardancy and electrochemical performance by coating an electrolyte-insoluble FR on commercial battery separators. By integrating dual materials via a two-pronged mechanism, the quantity of FR required could be limited to an ultrathin coating layer (4 μm) that rarely influences electrochemical performance. The developed composite separator has a four-times better flame retardancy than conventional polyolefin separators in full pouch cells. Additionally, this separator can be fabricated easily on a large scale for industrial applications. High-energy-density batteries (2 Ah) were assembled to demonstrate the scaling of the composite separator and to confirm its enhanced safety through nail penetration tests.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.nanolett.0c04568?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.nanolett.0c04568</a>.Materials, methods, supporting figures, and supporting table (<a class="ext-link" href="/doi/suppl/10.1021/acs.nanolett.0c04568/suppl_file/nl0c04568_si_001.pdf">PDF</a>)Videos S1–S8 (<a class="ext-link" href="/doi/suppl/10.1021/acs.nanolett.0c04568/suppl_file/nl0c04568_si_002.zip">ZIP</a>)This article has not yet been cited by other publications.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Nonflammable electrolyte with low exothermic design for safer lithium-based batteries

Shichao Zhang,Siyuan Li,Xinyang Wang,Chenchen Li,Yanxia Liu,Hao Cheng,Shulan Mao,Qian Wu,Zeyu Shen,Jiale Mao,Hongge Pan,Yingying Lu

DOI: https://doi.org/10.1016/j.nanoen.2023.108639

IF: 17.6

2023-06-25

Nano Energy

Abstract:Battery safety has always been a concern for high-energy-density configurations with nickel-rich cathode (Ni>0.6). Tremendous heat released from the reaction between highly flammable electrolyte and cathode under mechanical, thermal or electrical abuse may cause thermal runaway. Herein, we explore the heat release of various solvents with fully charged cathodes and summarized the solvent/heat release phase diagram. On this basis, we select fluorinated bis(2,2,2-trifluoroethyl) carbonate to prepare a nonflammable, low exothermic electrolyte. This electrolyte significantly reduces the maximum temperature by one-third and decreases the maximum heating rate from 206.0 o C s −1 to 82.6 o C s −1 during the thermal runaway process of commercial lithium-ion pouch cell. Moreover, it demonstrates remarkable compatibility with lithium metal anode. Benefited from the uniform solid-electrolyte interphase (SEI) rich in -CF 3 organic layer, the Li||LiNi 0.8 Co 0.1 Mn 0.1 O 2 (NCM811) full cell exhibits a capacity retention rate of 80% after 240 cycles. Notably, a 1.5 Ah Li metal pouch cell with a high energy density of 365 Wh kg −1 displays an excellent capacity retention of 90.02% after 98 cycles under realistic conditions. This work provides a novel approach to construct safer and longer-lasting lithium-based batteries by designing nonflammable and low exothermic electrolyte.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Supramolecular “flame-retardant” electrolyte enables safe and stable cycling of lithium-ion batteries

Xiaoxia Chen,Shuaishuai Yan,Tianhao Tan,Pan Zhou,Junxian Hou,Xuning Feng,Hao Dong,Peican Wang,Dong Wang,Baoguo Wang,Minggao Ouyang,Kai Liu

DOI: https://doi.org/10.1016/j.ensm.2021.11.026

IF: 20.4

2022-03-01

Energy Storage Materials

Abstract:Although energy densities of lithium-ion batteries (LIBs) continue to increase, safety problems such as fires and explosions have significantly hindered their large-scale applications. Conventional wisdom tells us the fire of LIBs largely originated from the flammable liquid carbonate solvents, and thus the research on additives with properties of suppressing “liquid-type fire” is the way to fabricate nonflammable batteries. However, the outcome has been proven to be inferior. Here, we carefully examined the evolution of battery fire under thermal abuse condition and found that the “jet fire” caused by flammable gases inside batteries is critical for the fire hazard, and the research effort should be redirected to search proper additives with “gaseous-type fire” suppressing properties. Unfortunately, conventional “gaseous-type fire suppressant” shows poor compatibility with battery electrolytes. Thus, we rationally designed a new kind of supramolecular electrolyte, where the molecules of “gaseous-type fire suppressant” and “SEI&CEI improver” are self-assembled together by intermolecular interactions. Due to this design, the supramolecular electrolyte produces improved cycling stability of Li metal anode and high voltage LiCoO2 cathode (up to 4.4 V). More importantly, it sharply decreases the self-extinguish time of carbonate-based electrolyte from ∼100 s/g to ∼0 s/g, which is unprecedented and can effectively suppress the “jet fire”, thus preventing the further combustion of commercial pouch cell during thermal runaway. Our work is providing the criteria required to overcome this challenge via supramolecular engineering of the electrolyte, which provides a new way to tune electrolyte functions and may bring numerous new possibilities.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology
Flame-retardant concentrated electrolyte enabling a LiF-rich solid electrolyte interface to improve cycle performance of wide-temperature lithium–sulfur batteries

Zhe Yu,Jianjun Zhang,Chao Wang,Rongxiang Hu,Xiaofan Du,Ben Tang,Hongtao Qu,Han Wu,Xin Liu,Xinhong Zhou,Xiaoyan Yang,Guanglei Cui

DOI: https://doi.org/10.1016/j.jechem.2020.03.034

IF: 13.1

2020-12-01

Journal of Energy Chemistry

Abstract:Lithium-sulfur batteries have been regarded as the most promising high-energy electrochemical energy storage device owing to the high energy density, low cost and environmental friendliness. However, traditional lithium-sulfur batteries using ether-based electrolytes often suffer from severe safety risks (i.e. combustion). Herein, we demonstrated a novel kind of flame-retardant concentrated electrolyte (6.5 M lithium bis(trifluoromethylsulphonyl)imide/fluoroethylene carbonate) for highly-safe and wide-temperature lithium-sulfur batteries. It was found that such concentrated electrolyte showed superior flame retardancy, high lithium-ion transference number (0.69) and steady lithium plating/stripping behavior (2.5 mAh cm−2 over 3000 h). Moreover, lithium-sulfur batteries using this flame-retardant concentrated electrolyte delivered outstanding cycle performance in a wide range of temperatures (−10 °C, 25 °C and 90 °C). This superior battery performance is mainly attributed to the LiF-rich solid electrolyte interphase formed on lithium metal anode, which can effectively suppress the continuous growth of lithium dendrites. Above-mentioned fascinating characteristics would endow this flame-retardant concentrated electrolyte a very promising candidate for highly-safe and wide-temperature lithium-sulfur batteries.

chemistry, physical,engineering, chemical, applied,energy & fuels
Vinyl-Tris-(methoxydiethoxy)silane As an Effective and Ecofriendly Flame Retardant for Electrolytes in Lithium Ion Batteries

H. P. Zhang,Q. Xia,B. Wang,L. C. Yang,Y. P. Wu,D. L. Sun,C. L. Gan,H. J. Luo,A. W. Bebeda,T. van Ree

DOI: https://doi.org/10.1016/j.elecom.2008.11.050

IF: 5.443

2008-01-01

Electrochemistry Communications

Abstract:In this paper, we report a new flame retardant, vinyl-Tris-(methoxydiethoxy)silane (VTMS), for use in electrolytes of lithium ion batteries. Burning tests showed that the addition of VTMS at 5–15vol.% into the currently used electrolyte could effectively reduce the flammability. As long as the added amount was below 10%, electrochemical performance such as reversible capacity and cycling showed little change. In addition, differential scanning calorimetry (DSC) in combination with X-ray photoelectron spectroscopy (XPS) disclosed that VTMS participated in the formation of the surface film on the cathode, which played a pivotal role in markedly improving the thermal stability of the LiCoO2 cathode. This kind of ecofriendly compound provides a new promising direction for the development of organic additives to improve the safety of lithium ion batteries.
Cosolvent Engineered Phosphaphenanthrene-Based Self-Extinguishing Electrolyte for Safer Lithium-Ion Batteries

Sheng Lei,Ziqi Zeng,Yuanke Wu,Zeyang Long,Xiaohang Li,Mengchuang Liu,Shijie Cheng,Jia Xie

DOI: https://doi.org/10.1021/acsaem.2c01007

IF: 6.4

2022-08-17

ACS Applied Energy Materials

Abstract:Battery-induced fire accidents are on the rise worldwide. The severity of battery fires has a significant correlation with the combustion characteristics of carbonate electrolytes, which is the main fuel of a battery. Here, 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO), an environmentally benign, smokeless, and highly efficient flame retardant, is introduced into a carbonate electrolyte for the first time to formulate a self-extinguishing electrolyte. It is shown that 5 wt % DOPO in the carbonate electrolyte is enough to achieve flame retardancy. Moreover, in the thermal runaway test, adding DOPO effectively delays the exothermic peak of graphite (Gr) and reduces the amount of heat. The cosolvent 1,1,2,2-tetrafluoroethyl-2,2,3,3-tetrafluoropropylether (TTE) may act as a solvent shell to weaken the irreversible decomposition of DOPO on Gr at low potentials and improve the interface compatibility, enabling acceptable cycling performance of LiFePO4 (LFP)–Li batteries with a 99.7% capacity retention after 65 cycles. The design strategy for electrolyte formulation provides a promising path to revisit obsolete flame retardants of the past, which gives insights into the development of nonflammable electrolytes.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Advanced Low-Flammable Pyrrole Ionic Liquid Electrolytes for High Safety Lithium-Ion Batteries

Zhixiang Chen,Hao Shen,Yucheng Zhu,Min Hua,Xuhai Pan,Yahong Liu,Hao Ji,Makhmud Bolliev,Juncheng Jiang

DOI: https://doi.org/10.1016/j.est.2023.108289

IF: 9.4

2023-01-01

Journal of Energy Storage

Abstract:With the rapid development of new energy vehicles, the safety of lithium-ion batteries (LIBs) is of increasing concern. Currently, the widely used carbonate-based organic electrolytes have a low ignition point, so it is important to develop high-safety LIBs electrolytes. In this work, a new electrolyte system was configured using commercial carbonate-based organic solvents mixed with [BMP]TFSI pyrrole-type ionic liquids in different proportions. It was experimentally verified that the newly configured electrolyte system led to a significant reduction in the flammability of the battery and even improved the electrochemical performance of the battery, while ensuring the proper function of the electrolyte. As the [BMP]TFSI content increases, the electrolyte self-extinguishing time decreases and the thermal stability increases. In particular, electrolytes with 30 wt% [BMP]TFSI addition exhibit the best balance of flame retardancy and electrochemical performance. The elec-trolyte system at this addition level has a high thermal stability and a significantly higher oxidation potential, which facilitates stable Li+ embedding and detaching and improves the stability of the SEI film. The assembled cells show a capacity retention of 99.58 % and a coulombic efficiency close to 100 % even after 200 cycles. The excellent cycle performance and high safety indicate that [BMP]TFSI has great prospects for application in the LIBs market. This is a guideline for the development of high-safety and high-capacity LIBs.
Gel electrolyte with flame retardant polymer stabilizing lithium metal towards lithium-sulfur battery

Huiming Zhang,Jiahang Chen,Jiqiong Liu,Xuan Zhang,Jun Yang,Yanna Nuli,Huiyang Ma,Jiulin Wang

DOI: https://doi.org/10.1016/j.ensm.2023.102885

IF: 20.4

2023-08-01

Energy Storage Materials

Abstract:Gel polymer electrolytes have the advantages of both solid and liquid electrolytes. Generally speaking, the liquid electrolyte is physically stored in the porous structure of polymer matrix which cannot block the reactions between the liquid electrolyte and the thermodynamically unstable lithium metal. At the same time, the stored liquid electrolyte still presents a safety hazard. This work designed and prepared a flame-retardant polymer Polyimide (PI) that can gelatinize the classic carbonate liquid electrolyte to form a flame-retardant gel polymer electrolyte, which greatly improved the safety of the battery. More importantly, there was CH/π interaction between the PI and the carbonate solvents which obviously reduced electrolyte consumption and side reactions with lithium metal. The proposed gel polymer electrolyte achieved a high lithium ion transference number of 0.727 and ensured remarkably stable lithium-sulfur batteries with SPAN cathodes.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology
Nonflammable Liquid Electrolytes for Safe Lithium Batteries

Xiaowei Mu,Hongliang Ding,Yudong Wu,Haibo Hu,Bin Yu

DOI: https://doi.org/10.1002/sstr.202300179

IF: 15.9

2023-01-01

Small Structures

Abstract:Lithium‐based batteries (lithium‐ion batteries, lithium‐metal batteries, and lithium–sulfur batteries, etc.) have become one of the most irreplaceable energy‐storage devices and shown huge application potential. However, the traditional liquid electrolytes used in lithium‐based batteries are flammable and exhibit poor electrochemical stability, which will significantly limit the further development of high energy density and high safety lithium‐based batteries. Thus, it is crucial to develop nonflammable electrolytes. In this work, the reasons why traditional liquid electrolyte is unsafe and the recent progress of nonflammable liquid electrolytes including flame‐retardant‐based electrolytes, highly concentrated electrolytes, localized high concentrated electrolytes, and ionic liquids–based electrolytes are summarized. The challenges and future perspectives toward how to decrease the fire hazard of lithium‐based batteries through liquid electrolyte design are also put forward.
A Novel Silicon/Phosphorus Co-Flame Retardant Polymer Electrolyte for High-Safety All-Solid-State Lithium Ion Batteries

Li Zeng,Lu Jia,Xingang Liu,Chuhong Zhang

DOI: https://doi.org/10.3390/polym12122937

IF: 5

2020-12-09

Polymers

Abstract:Developing a solid polymer electrolyte with superior flame retardancy and lithium-ion transportation properties is still a challenge. Herein, an intrinsic silicon/phosphorus co-flame retardant polymer solid electrolyte was prepared by using polyethylene glycol (PEG) co-polymerized with silicon and phosphorus-containing monomers. Due to the synergistic flame-retardant effect of silicon and phosphorus elements, this polymer electrolyte exhibits excellent thermal stability and flame resistance. Moreover, the ionic conductivity of the electrolyte at 25 °C is as high as 2.98 × 10−5 S/cm when the mass ratio of LiN(SO2CF3)2 (LiTFSI) and the prepared polymer electrolyte is 10:1. What is more, the LiFePO4/Li all-solid-state battery assembled with this solid electrolyte can work stably at a high temperature of 60 °C and exhibits a specific capacity of 129.2 mAh/g at 0.2 C after 100 cycles, providing a promising application prospect for high-safety lithium-ion batteries.

polymer science
High-Efficiency Lithium Metal Batteries with Fire-Retardant Electrolytes

Shuru Chen,Jianming Zheng,Lu Yu,Xiaodi Ren,Mark H. Engelhard,Chaojiang Niu,Hongkyung Lee,Wu Xu,Jie Xiao,Jun Liu,Ji-Guang Zhang

DOI: https://doi.org/10.1016/j.joule.2018.05.002

IF: 46.048

2018-01-01

Joule

Abstract:Rechargeable lithium metal batteries are regarded as the "holy grail'' of energy storage systems, but their practical applications have long been hindered by poor cyclability and severe safety concerns. In this work, we report a fire-retardant localized high-concentration electrolyte consisting of 1.2 M lithium bis(fluorosulfonyl) imide in a mixture of flame-retardant triethyl phosphate/bis(2,2,2-trifluoroethyl)ether (1:3 by mol) for 4-V class lithium metal batteries. This electrolyte enables stable, dendrite-free cycling of lithium metal anodes with high Coulombic efficiency of up to 99.2%. Moreover, it exhibits excellent anodic stability even up to 5.0 V and greatly enhances the cycling performance of lithium metal batteries. A LijjLiNi(0.6)Mn(0.2)Co(0.2)O(2) battery using this electrolyte can retain >97% capacity after 600 cycles at 1 C rate (ca. 1.6 mA cm(-2)), corresponding to a negligible capacity decay of <0.005% per cycle. Therefore, this new electrolyte can enable safe operation of high-energy lithium metal batteries for practical applications.

A Self-Cooling and Flame-Retardant Electrolyte for Safer Lithium Ion Batteries

A Safe Electrolyte Enriched with Flame-Retardant Solvents for High-Voltage LiCoO2||Graphite Pouch Cells

Progress of Enhancing the Safety of Lithium Ion Battery from the Electrolyte Aspect

An Intrinsic Flame‐Retardant Organic Electrolyte for Safe Lithium‐Sulfur Batteries

A flame-retardant polymer electrolyte for high performance lithium metal batteries with an expanded operation temperature

A Flame-Retardant Polymer Electrolyte for Safe and Long-Life Lithium Metal Battery

Designing Safer Lithium-Based Batteries with Nonflammable Electrolytes: A Review

Strategies for Flame-Retardant Polymer Electrolytes for Safe Lithium-Based Batteries

Non-coordinating flame retardants with varied vapor pressures enabling biphasic fire-extinguishing electrolyte for high safety lithium-ion batteries

A Trade-Off-Free Fluorosulfate-Based Flame-Retardant Electrolyte Additive for High-Energy Lithium Batteries

Electrolyte-Resistant Dual Materials for the Synergistic Safety Enhancement of Lithium-Ion Batteries

Nonflammable electrolyte with low exothermic design for safer lithium-based batteries

Supramolecular “flame-retardant” electrolyte enables safe and stable cycling of lithium-ion batteries

Flame-retardant concentrated electrolyte enabling a LiF-rich solid electrolyte interface to improve cycle performance of wide-temperature lithium–sulfur batteries

Vinyl-Tris-(methoxydiethoxy)silane As an Effective and Ecofriendly Flame Retardant for Electrolytes in Lithium Ion Batteries

Cosolvent Engineered Phosphaphenanthrene-Based Self-Extinguishing Electrolyte for Safer Lithium-Ion Batteries

Advanced Low-Flammable Pyrrole Ionic Liquid Electrolytes for High Safety Lithium-Ion Batteries

Gel electrolyte with flame retardant polymer stabilizing lithium metal towards lithium-sulfur battery

Nonflammable Liquid Electrolytes for Safe Lithium Batteries

A Novel Silicon/Phosphorus Co-Flame Retardant Polymer Electrolyte for High-Safety All-Solid-State Lithium Ion Batteries

High-Efficiency Lithium Metal Batteries with Fire-Retardant Electrolytes