Abstract:Abstract Micro-arc oxidation (MAO) technology can in-suit generate coatings with high hardness and strong adhesion on the surface of titanium alloy, thereby greatly improve the application range of titanium alloy. The morphology and properties of coatings are controlled by changing electrical parameters such as duty cycle and oxidation time. This work mainly aims to study the influence of different duty cycles and oxidation times on MAO coatings microstructures and properties of Ti6Al4V alloy under the condition of constant voltage and pulse frequency. The scanning electron microscopy (SEM) and X-ray Diffractometer (XRD) were used to investigate into MAO coatings microstructure and phase composition. The roughness, porosity, thickness, and microhardness of MAO coatings were evaluated respectively by roughness tester, thickness gauge, and microhardness tester. The results show that surface morphology of the MAO coatings change from crater-like micropores to foam-like protrusions with the enhancement of duty cycle and oxidation time. When duty cycle is 50% and oxidation time is 30 min respectively, the ejection of the molten material made the MAO coating surface appear foam-like protrusions, and the surface morphology is seriously damaged. When the oxidation time and the duty cycle are 30 min and 10% respectively, the rutile phase intensity is the maximum, and further increasing the duty cycle will lead to a rutile phase decrease. In a limit range, the hardness rise with increase of oxidation time and duty cycle. The highest hardness is 668.85 HV.

EFFECT OF GRAPHITE ADDITIVES IN ELECTROLYTES ON CHARACTERISTICS OF MICRO-ARC OXIDATION COATINGS ON 7E04 ALUMINUM ALLOY

Effect of Several Inorganic Additives on Microstructure and Properties of Microarc Oxidation Coating on Aluminium Alloy

Effects of NaAlO2 on Structure and Corrosion Resistance of Microarc Oxidation Coatings Formed on AM60B Magnesium Alloy in Phosphate–koh Electrolyte

Effect of Potassium Fluoride in Electrolytic Solution on the Structure and Properties of Microarc Oxidation Coatings on Magnesium Alloy

Study on Structure and Properties of Microarc Oxidation Coating Formed on AM60B Magnesium Alloy

Micro-arc Oxidation Behaviors of AZ91D Magnesium Alloy in Different Electrolytes

The Effects of Na2WO4 Concentration on the Properties of Microarc Oxidation Coatings on Aluminum Alloy

Study on structure and properties of microarc oxidation coating on magnesium alloy in phosphate-potassium hydroxide solution

Effect of Na2 WO4 on properties of micro-arc oxidation ceramic coatings on aluminum alloy

Effects of graphene content in alkaline silicate electrolyte on AA1060 pure aluminum micro‐arc oxidation coating

Preparation of Micro-Arc Oxidation Ceramic Coating on Aluminum Alloys

Effect of Graphite Content on the Conductivity, Wear Behavior, and Corrosion Resistance of the Organic Layer on Magnesium Alloy MAO Coatings

Influence of graphene on corrosion properties of micro arc oxidation coatings on 7075 aluminum alloy

Effects of Graphene on the Wear and Corrosion Resistance of Micro-Arc Oxidation Coating on a Titanium Alloy

Tribological and corrosion resistance properties of graphite composite coating on AZ31 Mg alloy surface produced by plasma electrolytic oxidation

Effect of Α-Al2o3 Additive on the Microstructure and Properties of MAO Coatings Prepared on Low Carbon Steel

Study on the structure and corrosion resistance of micro-arc oxidation coatings on TA10 titanium alloy with different graphite additions

Effect of NaOH concentration on microstructure and corrosion resistance of MAO coating on cast Al−Li alloy

Friction Reduction of Aluminum Alloy Micro-arc Oxidation Coating by Filling Graphene Oxide

Effect of Pulse Duty Cycle and Oxidation Time on Microstructure and Properties of Micro-arc Oxidation Coatings on Ti6Al4V Alloy

Role of the electrolyte composition in establishing plasma discharges and coating growth process during a micro-arc oxidation