Abstract:This paper describes a systematic study on exploring and understanding degradation mechanisms for long-term thermal stability of dye-sensitized solar cells (DSSCs). A 1080-hour thermal stability testing of DSSCs was conducted. Two different temperature conditions were selected to deeply explore the degradation mechanisms of DSSCs performance. One temperature condition is at 25 degrees C, the other is under a temperature cycle from -20 degrees C to 25 degrees C. DSSCs were sensitized by bis(tetrabutylammonium) cis-bis(thiocyanato) bis(2,2'-bipyridine-4-carboxylic acid, 4'-carboxylate)ruthenium(II) (N719). The cells maintained ca. 80% of its initial overall power conversion efficiency (eta) after 1080-hour aging. It is found that the decrease of. was ascribed to the decrease of short-circuit current density (J(SC)) while the open-circuit photovoltage and the fill factor increased with time; and the decrease rate of J(SC) for the cell under the temperature cycle from -20 degrees C to 25 degrees C was slower, compared with the cell at 25 degrees C. From the physical point of view, the reason for the drop in J(SC) was analyzed. Several possible degradation mechanisms, which are stability of the dye, aging of the photoelectrode film, change of the electrolyte components, and degradation of the counter electrode, were discussed systematically. Particularly, the long-term stability of N719 adsorbed on the TiO2 electrode permeated in the electrolyte was investigated by using UV-visible absorption spectrum and resonance Raman scattering. Density functional theory calculations were applied to illustrate the deterioration of N719 which caused the decrease of the light harvesting efficiency of photoelectrode and subsequently decreased J(SC). Moreover, high temperature will accelerate the deterioration. Additionally, the change of the electron transport/transfer between the interfaces in DSSCs, which was caused by aging of the photoelectrode film, change of the electrolyte components, and degradation of the counter electrode, was analyzed with electrochemical impedance spectroscopy (EIS). The analysis result of EIS shows that the change of the electron collection efficiency of photoelectrode with time was not large. As a conclusion, the long-term stability of N719 is found to be the main reason for DSSCs degradation.

Role of Carbon Nanotubes to Enhance the Long-Term Stability of Dye-Sensitized Solar Cells

Structural Effect of Low-dimensional Carbon Nanostructures on Long-term Stability of Dye Sensitized Solar Cells

Gold nanoparticle decorated carbon nanotube nanocomposite for dye-sensitized solar cell performance and stability enhancement

Enhancing Photovoltaic Performance with BaTiO3/MWCNTs Composite Photoelectrodes in Dye-Sensitized Solar Cells

Optimization of the cutting process of multi-wall carbon nanotubes for enhanced dye-sensitized solar cells

Application of New Carbon Materials in Dye-Sensitized Solar Cells

Application of TiO2 nanoparticles coated multi-wall carbon nanotube to dye-sensitized solar cells

Tio2 Composing with Pristine, Metallic or Semiconducting Single-Walled Carbon Nanotubes: Which Gives the Best Performance for A Dye-Sensitized Solar Cell

Modified hydrothermal method for synthesizing titanium dioxide-decorated multiwalled carbon nanotube nanocomposites for the solar-driven photocatalytic degradation of dyes

Performance Of Dye-Sensitized Solar Cells Based On Mwcnt/Tio2-Xnx Nanocomposite Electrodes

Synergism in carbon nanotubes and carbon-dots: counter electrode of a high-performance dye-sensitized solar cell

Application of Non-Covalent Functionalized Carbon Nanotubes for the Counter Electrode of Dye-Sensitized Solar Cells

Open-circuit voltage improvement by using TiO2 nanotubes as a working electrode of dye-sensitized solar cell

Carbon Nanotubes in Dye-Sensitized Solar Cells Photo-Anode

Degradation Mechanisms Investigation for Long-Term Thermal Stability of Dye-Sensitized Solar Cells

Chemically modified titanium oxide nanostructures for dye-sensitized solar cells

Intertwined Aligned Carbon Nanotube Fiber Based Dye-Sensitized Solar Cells

Multiwalled carbon nanotubes confined Mo 2 C nanoparticles as counter electrodes for boosting triiodide reduction reaction in dye-sensitized solar cells

Improving Photovoltaic Performance of Dye-Sensitized Solar Cell by Modification of Photoanode With g-C 3 N 4 /TiO 2 Nanofibers

Preparation of Carbon Nanotube/TiO2 Mesoporous Hybrid Photoanode with Iron Pyrite (FeS2) Thin Films Counter Electrodes for Dye-Sensitized Solar Cell

Fabrication and Stability of Opened-End TiO2 Nanotube Arrays Based Dye-Sensitized Solar Cells