Abstract:Abstract All solid-state rechargeable lithium metal batteries (SS-LMBs) are gaining more and more importance because of their higher safety and higher energy densities in comparison to their liquid-based counterparts. In spite of this potential, their low discharge capacities and poor rate performances limit them to be used as state-of-the-art SS-LMBs. This arise due to the low intrinsic ionic and electronic transport pathways within the solid components in the cathode during the fast charge/discharge processes. Therefore, it is necessary to have a cathode with good electron conducting channels to increase the active material utilization without blocking the movement of lithium ions. Since SS-LMBs require a different morphology and composition of the cathode, we selected LiFePO 4 (LFP) as a prototype and, we have systematically studied the influence of the cathode composition by varying the contents of active material LFP, conductive additives (super C65 conductive carbon black and conductive graphite), ion conducting components (PEO and LiTFSI) in order to elucidate the best ion as well as electron conduction morphology in the cathode. In addition, a comparative study on different cathode slurry preparation methods was made, wherein ball milling was found to reduce the particle size and increase the homogeneity of LFP which further aids fast Li ion transport throughout the electrode. The SEM analysis of the resulting calendered electrode shows the formation of non-porous and crack-free structures with the presence of conductive graphite throughout the electrode. As a result, the optimum LFP cathode composition with solid polymer nanocomposite electrolyte (SPNE) delivered higher initial discharge capacities of 114 mAh g -1 at 0.2C rate at 30 °C and 141 mAh g -1 at 1C rate at 70 °C. When the current rate was increased to 2C, the electrode still delivered high discharge capacity of 82 mAh g -1 even after 500 cycle, which indicates that the optimum cathode formulation is one of the important parameters in building high rate and long cycle performing SS-LMBs.

A LiFePO4/Li2Sn hybrid system with enhanced Li-ion storage performance

A LiFePO<sub>4</sub>/Li<sub>2</sub>S<sub>n</sub> hybrid system with enhanced Li-ion storage performance

High Performance Hybrid Mg-Li Ion Batteries with Conversion Cathodes for Low Cost Energy Storage

Designing a Hybrid Electrode Toward High Energy Density with a Staged Li+ and PF6− Deintercalation/intercalation Mechanism

Complementary Hybrid Design of Solvated Electrolyte Membranes Enabled by Porous Carbon Reinforcement for High-Performance Lithium Batteries

A novel hybrid positive electrode with liquid-solid redox couples having high-capacity for lithium battery

Ultra-stable Li||LiFePO4 Batteries Via Advanced Designing of Localized High Concentration Electrolyte

A sustainable LiFePO4/graphite hybrid cathode capable of stepwise cation and anion storage

Lithium Iron Phosphate Enhances the Performance of High-Areal-Capacity Sulfur Composite Cathodes.

Dual-function LiFePO4 modified separator for low-overpotential and stable Li-S battery

Tri-phase (1-X-y) Li2FeSiO4·xLiFeBO3·yLiFePO4 Nested Nanostructure with Enhanced Li-storage Properties

Tuning of composition and morphology of LiFePO4 cathode for applications in all solid-state lithium metal batteries

A Hybrid Ionic Liquid-Based Electrolyte for High-Performance Lithium–sulfur Batteries

Design of Li2FeSiO4 Cathode Material for Enhanced Lithium-Ion Storage Performance

Hybrid poly-ether/carbonate ester electrolyte engineering enables high oxidative stability for quasi-solid-state lithium metal batteries

Advanced lithium–sulfur batteries enabled by a SnS2-Hollow carbon nanofibers Flexible Electrocatalytic Membrane

Hybrid solid electrolyte with the combination of LATP ceramic and PEO polymer by a solvent-free procedure

Localized High Concentration Polymer Electrolyte Enabling Room Temperature Solid-State Lithium Metal Batteries with Stable LiF-rich Interphases

High-Performance Solid Lithium Metal Batteries Enabled by LiF/LiCl/LiIn Hybrid SEI via InCl3 -Driven In Situ Polymerization of 1,3-Dioxolane

Manipulating Electrolyte and Solid Electrolyte Interphase to Enable Safe and Efficient Li-S Batteries

Integrated Design of a Functional Composite Electrolyte and Cathode for All-Solid-State Li Metal Batteries