Abstract:On-chip mode-division multiplexing (MDM) can increase the transmission capacity of a single optical bus waveguide. It is of great significance for the MDM systems to design the multimode waveguide bends (MWBs) with compact sizes. A method of designing the MWB using the inverse design algorithm is presented in this paper. Ultra-compact MWBs with high performances are realized by changing the curvature radius of the waveguide curve, and the fabrication process only requires a single step photo-lithography and plasma etching. The three-mode bent waveguide with an effective radius of only 9.35 µm is designed and tested. The theoretical excess losses of TE0, TE1, and TE2 mode are less than 0.04 dB in a wide spectral range of 1500 to 1600 nm, and the crosstalks between all guided modes are all less than −29 dB. For the fabricated 90° waveguide bend the measured excess losses are 0.17, 0.04, and 0.16 dB at the central wavelength of 1550 nm, respectively, and the crosstalks between all three modes are less than −21 dB in the wavelength range from 1520 to 1600 nm. The proposed design method can be also extended to more mode-channels.

Waveguide Bends by Optical Surface Transformations and Optic-Null Media

Waveguide Bends from Nanometric Silica Wires

Optimizing Design to Optical Waveguide Bend Structure

Transformation Optical Design of a Bending Waveguide by Use of Isotropic Materials.

Calculate and analysis curved optical waveguide with FDTD

Structure-Induced Hyperbolic Dispersion in Waveguides

Reflectionless spatial beam benders with arbitrary bending angle by introducing optic-null medium into transformation optics*

Research of Bent Waveguide Optimization

Propagation Analysis Of Waveguide With Inhomogeneous Bi-Anisotropic Material

Optical transformation design of waveguide bends and splitter in photonic crystals

Ultra Sharp Curved Waveguide Design Based on Topology Optimization

Sharp Bend in Two-Dimensional Optical Waveguide Based on Gradient Refractive Index Structure.

Ultrathin 90-Degree Sharp Bends for Spoof Surface Plasmon Polaritons

Application of Coordinate Transformation in Bent Waveguides

Ultra-compact, low-loss,TE_0- and TE_1-compatible mode waveguide bends

Transformation Inverse Design

Inverse Design of Ultra‐Compact Multimode Waveguide Bends Based on the Free‐Form Curves

Silicon Nitride Bent Asymmetric Coupled Waveguides with Partial Euler Bends

Tunable Waveguide Bends with Graphene-Based Anisotropic Metamaterials

Efficient analysis and design of low-loss whispering-gallery-mode coupled resonator optical waveguide bends