Abstract:The quasi-rigid body model is the relationship model between the volume error and the geometric error of the CMM under the consideration of simple deformation. The quasi-rigid body model reflects the comprehensive influence of all geometric errors and ensures the calibration accuracy of geometric errors. However, the geometric error solution based on the quasi-rigid body model has the problem of multicollinearity. To solve this problem, in this study, the geometric errors of CMM are compensated using laser tracing multistation measurement technology and the LASSO (Least absolute shrinkage and selection operator, LASSO) algorithm. First, a laser tracing multi-station measurement model is established, and then the coordinates of the laser tracer station are obtained by solving the redundant equations provided by the laser tracer multi-station measurement system using the L-M (Levenberg Marquardt) algorithm. The global positioning system localization principle combined with the L-M algorithm is used to determine the actual position of the CMM measurement point. Then, the volume error is determined by calculating the difference between the actual position of the measurement point and the planned position. A mathematical model of the volumetric and geometric errors is obtained from the CMM quasi-rigid body model, and the LASSO algorithm is used to solve the model to obtain the 17 geometric errors of the CMM. Using the relationship between the volume error and the uniaxial geometric error, the 4 rotational errors are solved of εz (x), εx- (z), εv (z), εz (z). To verify the measurement accuracy of the compensated CMM, the compensation effect is verified by using the XL80 interferometer with the measuring block. The experimental results indicate that when error compensation is performed, the measurement accuracy of the CMM is improved by >50% compared to the initial state, and no mechanical processing is involved.

Coordinate alignment of combined measurement systems using a modified common points method

Configuration Analysis Of The Ers Points In Large-Volume Metrology System

Registration Error Analysis and Evaluation in Large-Volume Metrology System

A method for decreasing alignment error of coordinator measurement machine

A Universal Precision Positioning Equipment in Coordinate Unified for Large Scale Metrology

Coordinate Transformation Uncertainty Analysis in Large-Scale Metrology

Target control point position calibration based on coordinate measuring machine and global bundling optimization algorithm

A Combined Measurement Method for Large-Size Aerospace Components

A Multi-Axis Space Coordinate System Calibration Method for Composite Line Laser Measuring Systems Using Non-Feature Planes and Multi-Angle Spheres

A combined calibration method of a mobile robotic measurement system for large-sized components

Uncertainty Modeling of the Spatial Coordinate Error Correction System of the CMM Based on Laser Tracer Multi-Station Measurement

Global calibration method for laser-tracking measurement system based on vision guiding

Measuring geometrical errors of linear axis of machine tools based on the laser tracker

A new calibration method for hybrid machine tools using virtual tool center point position constraint

Measurement and Compensation of Geometric Errors of Three-Axis Machine Tool by Using Laser Tracker Based on a Sequential Multilateration Scheme

Distributed measurement system calibration method with automatic networking mechanism

LASSO based compensation method for geometric errors of large coordinate measuring machine

CMM Spatial Coordinate Correction Method Based on Laser Tracer Multistation Measurement

The Method of the Calibration of the Base Points in the Laser Tracking 3D Coordinates Measuring System

Global Calibration Method for Multi-Vision Measurement System with Coplanar Targets

A Global Calibration Method for Multisensor Metrology System