Abstract:Five-phase permanent magnet synchronous motors offer merits of high fault tolerant capability and high torque per rms ampere and, thus, are suitable for applications, such as aerospace and electric vehicles. However, the complex machine model causes difficulties in controller design. Besides, having 32 voltage vectors with various effects on currents and torque, the selection of the optimal switching state becomes a challenge to achieve a performance tradeoff. This paper proposes an improved model predictive direct torque control (MPDTC) strategy consisting of a quadratic evaluation method (QEM) and a harmonic voltage elimination method (HVEM). In QEM, the preliminary vector is first chosen from the vectors of the outer decagon according to a cost function for torque and flux regulation. This preliminary vector, composed of three sets of different amplitudes, is further synthesized according to the error between the actual torque/flux and the references. In this way, the optimal voltage vector can be obtained without significantly increasing the computational burden. In HVEM, by subtracting the harmonics voltage component from the vector determined previously in QEM, the final voltage vector is obtained for mitigating stator harmonic currents. The proposed control strategy is compared with the conventional MPDTC approach. The results confirm the effectiveness of the proposed methods with good steady-state performance while maintaining quick dynamic responses.

New Optimal Current Control Strategy for Six-Phase DC-Biased Vernier Reluctance Machines Considering Distorted EMF

Negative Sequence Current Suppression of Dual Three-Phase Permanent Magnet Synchronous Machines Considering Inductance Asymmetry

A Novel Harmonic Current Control Method for Torque Ripple Reduction of SPMSM Considering DC-Link Voltage Limit

Online Maximum Torque Per Total Ampere Control for Nest-loop Secondary Linear Doubly-Fed Machine Considering Static End Effect

Harmonic Currents Injection Strategy with Optimal Air Gap Flux Distribution for Multiphase Induction Machine

Dual Closed-Loop Control Strategy on Harmonic Plane for Multiphase Induction Motor with Harmonic Injection Based on Air-Gap Flux Orientation Control

A Sequential Direct Torque Control Scheme for Seven-Phase Induction Machines Based on Virtual Voltage Vectors

Torque Ripple Suppression Control for Dual Three-Phase Permanent-Magnet Synchronous Motor

Comparative Study of Harmonic Current Suppression Control Strategies for Six-Phase DC-Biased Vernier Reluctance Machines

Optimal Three-Dimensional Current Computation Flux Weakening Control Strategy for DC-Biased Vernier Reluctance Machines Considering Inductance Nonlinearity

Modeling and Current Control Strategy for Novel Two-Phase DC-Biased Vernier Reluctance Machine

Harmonic Current Suppression Control Strategy For Hybrid Excited Vernier Pm Machines

Strategies for the fault-tolerant current control of a multiphase machine under open phase conditions

An Improved Model Predictive Direct Torque Control Strategy for Reducing Harmonic Currents and Torque Ripples of Five-Phase Permanent Magnet Synchronous Motors.

Novel Harmonic Current Controller for DC-Biased Vernier Reluctance Machines Based on Virtual Winding

Air-gap and Yoke Flux Density Optimization for Multiphase Induction Motor Based on Novel Harmonic Current Injection Method

Multiphysics Modeling and Optimal Current Profiling for Switched Reluctance Machine Drive

Adaptive Torque Ripple Suppression Methods of Three-Phase PMSM During Single-Phase Open-Circuit Fault-Tolerant Operation

Novel Virtual Winding Current Controller for Suppression of Linear Permanent Magnet Machine Electromagnetic Thrust Ripple

MTPA Control Strategy for Six-phase DC-biased Hybrid Excitation Vernier Reluctance Machines

Loss Minimization Control of Vernier Reluctance Machines with DC Field Windings in Stator.