Abstract:A multi-stage high pressure reducing valve (MSHPRV) is proposed. It can achieve a multi-stage pressure reducing way. Valve failure mainly occurs under high pressure and high temperature conditions, thus it is necessary to investigate the strength of MSHPRV under those complex conditions. In this paper, the mathematical model of MSHPRV is established and Computational Fluid Dynamics (CFD) method is employed to simulate its flow fields and thermo-mechanical stress. Next, the stress of MSHPRV under different opening time and the fatigue damage of MSHPRV under different valve openings are studied. Finally, two changes are provided on geometry of MSHPRV and the geometrical factors are optimized. The results show that, the radial direction from inner wall to outer wall is the main heat transfer direction for valve body. At opening time 50 s, the working condition of MSHPRV is dangerous condition. Meanwhile, the maximum value of thermal stress is 487 MPa, which is located at the upper end face of valve chamber region B3. There is a lag effect of stress distribution with respect to temperature distribution. The combined stress of valve body is composed of thermal stress and mechanical stress, in which thermal stress holds the dominant position. Moreover, with the increasing of valve opening, the fatigue damage of valve body increases correspondingly. It can be concluded that MSHPRV can cope with complex conditions like high pressure and high temperature. In the optimization design of MSHPRV, it can be found that the best strength of MSHPRV is achieved with such geometrical factors as angle 15, diameter 4 mm and 2 stage plates. Besides, radian design as the improved structure is recommended. This work can benefit the further research work on the regulation performance and safe operation of high pressure reducing valve. (C) 2017 Elsevier Ltd. All rights reserved.

Prediction of Blowdown of a Pressure Relief Valve Using Response Surface Methodology and CFD Techniques

Development of a novel high pressure electronic pneumatic pressure reducing valve

Simulation and Experiment on Static Characteristic of Water Hydraulic Proportional Pressure Relief Valve

The CFD Analysis of Cavitation Erosion and Structural Optimization for an Unloading Valve

Experiments and transient simulation on spring-loaded pressure relief valve under high temperature and high pressure steam conditions

Cavitation analysis in a re-designed direct acting pressure relief valve through flow visualization method

The Design and Analysis of Multi-Stage Pressure Relief Valve with Hydraulic Resistance Network

Design and Simulation of a High Pressure Proportional Pneumatic Pressure Reducing Valve

Optimization of Nonlinear Pressure-Flow Characteristics of a Spring-Loaded Pressure Relief Valve Based on Computational Fluid Dynamics Simulation

Dynamic Analysis of a High-Pressure Relief Valve During Opening

Pneumatic Resistance Network Analysis and Dimension Optimization of High Pressure Electronic Pneumatic Pressure Reducing Valve

Clearance Leakage in High Pressure Pneumatic Relief Valve with Slide Pilot

Turbulent Compressible Flow Analysis on Multi-Stage High Pressure Reducing Valve

Advanced simulation of naval pressure relief valve

Numerical analysis of aerodynamic noise in a high parameter pressure reducing valve

An Experimental and Numerical Analysis on the Dynamical Behavior of a Safety Valve in the Case of Two-phase Non-flashing Flow

Thermo-mechanical Stress and Fatigue Damage Analysis on Multi-Stage High Pressure Reducing Valve

Parametric Analysis on Throttling Components of Multi-Stage High Pressure Reducing Valve

Numerical Study on Flow Characteristics in High Multi-Stage Pressure Reducing Valve

Investigation on Cavitation Flow in Pressure Relief Valve with High Pressure Differentials for Coal Liquefaction

Numerical Simulation and Analysis of the dynamic Behaviours on the Spring-loaded Pressure Relief Valve