Abstract:"Paper-like" film material made from stacked and overlapping graphene oxide sheets can be exfoliated (expanded) through rapid heating, and this has until now been done with no control of the final geometry of the expanded graphene oxide material, i.e., the expansion has been physically unconstrained. (As a consequence of the heating and exfoliation, the graphene oxide is "reduced", i.e., the graphene oxide platelets are deoxygenated to a degree.) We have used a confined space to constrain the expanding films to a controllable and uniform thickness. By changing the gap above the film, the final thickness of expanded films prepared from, e.g., a 10 μm-thick graphene oxide film, could be controlled to values such as 20, 30, 50, or 100 μm. When the expansion of the films was unconstrained, the final film was broken into pieces or had many cracks. In contrast, when the expansion was constrained, it never cracked or broke. Hot pressing the expanded reduced graphene oxide films at 1000 °C yielded a highly compact structure and promoted graphitization. Such thickness-controlled expansion of graphene oxide films up to tens or hundreds of times the original film thickness was used to emboss patterns on the films to produce areas with different thicknesses that remain connected "in plane". In another set of experiments, we treated the original graphene oxide film with NaOH before its controlled expansion resulted in a different structure featuring uniformly distributed pores and interconnected layers as well as simultaneous activation of the carbon.

Shape-controlled of Ten-Nanometer-thick Graphite and Worm-Like Graphite by Lithographic Exfoliation

Highly Efficient Synthesis of Neat Graphene Nanoscrolls from Graphene Oxide by Well-Controlled Lyophilization

Efficient Exfoliation of Graphite in Chloroform with a Pyrene-Containing Hyperbranched Polyethylene As Stabilizer to Render Pyrene-Functionalized High-Quality Graphene

Nanomanufacturing of Graphene Nanosheets Through Nano-Hole Opening and Closing

Compressible, Dense, Three-Dimensional Holey Graphene Monolithic Architecture

Highly Conducting Graphene Sheets and Langmuir-Blodgett Films

Nanotomy-based Production of Transferable and Dispersible Graphene Nanostructures of Controlled Shape and Size

Fabrication of Graphite Nano-Structures

A high-yield and size-controlled production of graphene by optimizing fluid forces

Graphene Sheets from Worm-Like Exfoliated Graphite

Controlling the Thickness of Thermally Expanded Films of Graphene Oxide

Freely-shapable fabrication of aerogel patterns and 3D architectures by freeze-assisted transfer printing

A Catalytic Etching-Wetting-Dewetting Mechanism in the Formation of Hollow Graphitic Carbon Fiber

Synthesis of graphene oxide sheets with controlled sizes from sieved graphite flakes

Controllable Assembly of Continuous Hollow Graphene Fibers with Robust Mechanical Performance and Multifunctionalities

Graphene Shape Control by Multistage Cutting and Transfer

Shape-Controlled Growth of Carbon Nanostructures: Yield and Mechanism

Strong, Conductive, Lightweight, Neat Graphene Aerogel Fibers with Aligned Pores.

Highly conducting graphene sheets and Langmuir|[ndash]|Blodgett films

Experimental Guidance to Graphene Macroscopic Wet-Spun Fibers, Continuous Papers, and Ultralightweight Aerogels

Size-controlled Synthesis of Graphene Oxide Sheets on a Large Scale Using Chemical Exfoliation